Fiero Digital Gauges For All 84-88 Non Gt/se/formula - New on 2040-parts.com

DIGITAL GAUGE CONVERSION PACKAGE FOR ALL NON GT/SE/ FORMULA 84 - 88 FIERO'S

The digital gauge package includes:

• Main dash gauge conversion which includes a Red digital Tachometer, Speedometer, Fuel, Water Temperature gauges, and either a Oil pressure or Voltmeter gauge below the Tach (Please Specify).
  
• Designed by a long time Fiero owner specifically for the fiero (not from another car)
• They easily mount inside of the factory gauge housing after removing the original gauges
• Tinted Plexiglas panel to perfectly replace the gray factory panel covering the factory gauges
• Available in either full English or Metric display versions
• Factory indicators are retained: turn signal, brake, highbeam, etc
• Bright Red or Blue or Green displays (or any combination) for the best contrast in sunlight
• Tachometer and Speedometer have a light bargraph that wraps around their digital displays for quick glance readings.
• Factory odometer is retained
• Complete installation instructions and any needed mounting hardware is included
• All gauges use the factory sensors for easy installation
• All Gauges dim when either the parking and/or headlights are turned on
• Labels for all gauges are lit and they will flash when any readings are out of range (Ex. temp too high, oil press too low, etc…)
• All Microprocessor controlled
• 5 year warranty
• Short installation time of about 3 or 4 hours as they just plug in place of the existing gauges.
• Over 400 of these have been sold to Fiero/kit car owners over the past 11 years.
• Works with any engine swap in your Fiero including V8, 3800, Northstar, etc....

Specifications for each individual gauge are as follows

SPEEDOMETER

• Speedometer will read from 0 MPH to 200 MPH or 0 KPH to 250 KPH for the metric version
• Reads in 1 MPH or 1 KPH increments
• Bargragh display is jumper selectable for either 80 MPH or 120 MPH full scale reading. For the metric version it is selectable for either 130 KPH or 190 KPH full scale reading

TACHOMETER

• Tachometer will read from 0 RPM to 9900 RPM
• Reads in 100 RPM increments
• Tachometer is jumper selectable for use with either a 4, 6, or 8 cylinder engine
• Bargragh display is jumper selectable for either 5000, 6000, or 7000 RPM full scale reading

FUEL

• Fuel gauge will read from 0.0 to 9.9 Gallons or 0.0 to 60 Liters
• Reads in .1 Gallon or 1 Liter increments
• Full fuel tank reading is adjustable
• Fuel label will blink when the fuel drops below 2.0 gallons or 7.0 Liters

WATER TEMPERATURE

• Temperature gauge will read from 80° to 255° F or 30° to 124° C
• Reads in 5° F increments or 2° C increments
• Temperature label will blink if the temperature rises above 230° F or 112° C

OIL PRESSURE

• Oil pressure gauge will read from 0 Psi to 99 Psi or 0 to 9.9 Bar
• Reads in 1 Psi or .1 Bar increments
• Oil label will blink if the oil pressure rises above 79 Psi or 7.9 Bar or falls below 16 Psi or 1.6 Bar

VOLT METER

• Voltmeter will read from 9.5 to 24.0 volts
• Reads in .1 volt increments
• Volts label will blink if the voltage rises above 15.4 or falls below 11.6 volts

I designed these gauges for my 86-GT V8 Fiero of 16 years initially. For the past 11 years I have been offering these gauges, I designed specifically for the Fiero, to other Fiero owners.

Buyer pays $14.00 for priority mail shipping in the continential US. Please allow 3 to 4 weeks for the gauges to be shipped, as they are custom built to fit your version of Fiero.

You can also go to my web sight for more info at: www.tomsdigitalelectronics.com

OPTIONS

• Available in BLUE or GREEN as a $49 option.  A mix of the colors is also available as an option, just tell me what you are looking for.
  

• Additional set of Tinted Plexiglas panels, for improved contrast viewing and a complete blacked out look when off, just add $42.00.

• Plexiglas panel that mounts around the Stereo/AC controls/Vents in the center console.  This will give the same look to the center console as the digital dash provides.  For this option just add $47.00.  See picture of it below.

• Plexiglas panel that mounts around the shifter/ashtrays/window switches in the center console.  This will give the same look to the center console as the digital dash provides.  This panel is mounted using double sided tape as there is no way to bolt it on like the others.  The panel is available for Auto, 4, or 5 speed trans and it has a shift label for 4 or 5 speed, so please specify which one you have.  For this option just add $49.00.  See picture of it below also.  

• Low cost option (partial digital kit) also available.  This includes the same items as this auction, minus the digital Tach and Speedo.  The plexiglas panels have holes cut out for the analog Tach/Speedo for this version.  If you like you can always add the digital Tach and Speedo later.  The price for this kit is $289.00.

Posted with eBay Mobile