Fiero Digital Gauges - Partial Kit For All 85-88 Gt/se/formula - New on 2040-parts.com

PARTIAL DIGITAL GAUGE CONVERSION PACKAGE FOR ALL GT/SE 85 - 88 FIERO'S

The digital gauge package includes:

• Main dash gauge conversion which includes Red digital Fuel, and Water Temperature gauges
  
• Center dash gauge conversion including a Red digital Volt Meter and Oil Pressure gauge
• Factory Speedometer and Tachometer are retained
  
• Designed by a long time Fiero owner specifically for the fiero (not from another car)
• They easily mount inside of the factory gauge housing after removing the original gauges
• Tinted Plexiglas panel to perfectly replace the gray factory panel covering the factory gauges
• Available in either full English or Metric display versions
• Factory indicators are retained: turn signal, brake, highbeam, etc
• Bright Red, Blue, Green displays for the best contrast in sunlight
• Factory odometers are retained
• Complete installation instructions and any needed mounting hardware is included
• All gauges use the factory sensors for easy installation
• All Gauges dim when either the parking and/or headlights are turned on
• Labels for all gauges are lit and they will flash when any readings are out of range (Ex. temp too high, oil press too low, etc…)
• All Microprocessor controlled
• 5 year warranty
• Short installation time of about 3 hours as they just plug in place of the existing gauges.
• Over 400 of these have been sold to Fiero/kit car owners over the past 11 years.
• Works with any engine swap in your Fiero including V8, 3800, Northstar, etc....

Specifications for each individual gauge are as follows

FUEL

• Fuel gauge will read from 0.0 to 9.9 Gallons or 0.0 to 60 Liters
• Reads in .1 Gallon or 1 Liter increments
• Full fuel tank reading is adjustable
• Fuel label will blink when the fuel drops below 2.0 gallons or 7.0 Liters

WATER TEMPERATURE

• Temperature gauge will read from 80° to 255° F or 30° to 124° C
• Reads in 5° F increments or 2° C increments
• Temperature label will blink if the temperature rises above 230° F or 112° C

OIL PRESSURE

• Oil pressure gauge will read from 0 Psi to 99 Psi or 0 to 9.9 Bar
• Reads in 1 Psi or .1 Bar increments
• Oil label will blink if the oil pressure rises above 79 Psi or 7.9 Bar or falls below 16 Psi or 1.6 Bar

VOLT METER

• Voltmeter will read from 9.5 to 24.0 volts
• Reads in .1 volt increments
• Volts label will blink if the voltage rises above 15.4 or falls below 11.6 volts

I designed these gauges for my 86-GT V8 Fiero of 16 years initially. For the past 11 years I have been offering these gauges, I designed specifically for the Fiero, to other Fiero owners.

Buyer pays $13.00 for priority mail shipping in the continential US. Please allow 3 to 4 weeks for the gauges to be shipped, as they are custom built to fit your version of Fiero.

You can also go to my web sight for more info at: www.tomsdigitalelectronics.com

OPTIONS

• Available in BLUE or GREEN as a $29 option.  A mix of the colors is also available as an option, just tell me what you are looking for.
  

• Additional set of Tinted Plexiglas panels, for improved contrast viewing and a complete blacked out look when off, just add $42.00.

• Plexiglas panel that mounts around the Stereo/AC controls/Vents in the center console.  This will give the same look to the center console as the digital dash provides.  For this option just add $47.00.  See picture of it below.

• Plexiglas panel that mounts around the shifter/ashtrays/window switches in the center console.  This will give the same look to the center console as the digital dash provides.  This panel is mounted using double sided tape as there is no way to bolt it on like the others.  The panel is available for Auto, 4, or 5 speed trans and it has a shift label for 4 or 5 speed, so please specify which one you have.  For this option just add $49.00.  See picture of it below also.