Fieroguru Performance Llc - F40 Transmission Swap Cable Kit on 2040-parts.com

Fieroguru Performance LLC

 F40 Shifter Cable Kit for Fiero Swaps

My original LS4/F40 installation used a modified 4 speed Fiero shifter, 2 Getrag Select cables, and a custom cable mount bracket for the transmission. On aggressive WOT upshifts to 3^rd gear, the shift cable would buckle (instead of engaging 3^rd gear) and within 6 months the shift cable broke.

A stronger, better shifting, and better fitting cable solution was needed...  This kit was designed around a stock 5 speed Fiero shifter – so there is no need to elongate the slots in the shifter or relocate the cable attachments. A bolt-in reverse lockout attaches to the 5 speed shifter using an existing hole and stud. An Isuzu Shift cable (significantly thicker/stronger) handles the "shift" or "front to back" functions. A Getrag Select cable handles the "select" or "side -to-side" functions. Lastly the custom bracket to mount the cables at the transmission is very rigid and holds the cable ends with machined split collar clamps. 

This setup has been issue free in my LS4/F40 Fiero for 2+ years and 20K+ miles, and countless 7000 rpm WOT upshifts.

The Fieroguru Performance LLC F40 Cable Setup uses:

·

• Fiero 5 speed shifter – no modification needed – This can be a Getrag or Isuzu shifter - Note: this is not included in this Kit. 
• Reverse Lock-out Mechanism – Bolts to an unmodified 5 speed shifter.
• Custom Cable Mount Bracket – Bolts to the transmission using existing bolts.
• 1 New Rodney Dickman Isuzu Shift Cable - with the required F40 ball end installed.
• 1 New Rodney Dickman Getrag Select Cable - with the required F40 ball end installed.

This auction is for items shown above in blue. Other parts shown in the pictures are for examples of installation only and are not included.

Shipping/Handling:

• F40 Shift Cable Kit will ship within 5 days of order.
• This kit is only available in the United States