Find or Sell any Parts for Your Vehicle in USA

Fits: 90-95 Acura Integra 1.8l B18b1 Dohc Master Engine Rebuild Kit *graphite* on 2040-parts.com

US $290.95
Location:

Orange, California, United States

Orange, California, United States
Condition:New Brand:Aftermarket Brand Surface Finish:GRAPHITE Head Gasket (material) Manufacturer Part Number:EK-B18B1 (90-95) Warranty:Yes Interchange Part Number:Fel Pro Reference: HS 9698PT & CS 9689 (gaskets) OEM Pistons & Rings Cross-Reference::13010-P54-000, 13011-PR3-004 Other Part Number:Water Pump Reference: 135-1400 NPR Pistons & Rings Cross-Ref.:10-733 or 10-753 Placement on Vehicle:Front UPC:Does not apply

  What  it fits:

  •   1990-1995 Acura Integra 1.8L / B18B1 Motor /  16V / DOHC 

*Please  examine our images carefully to see what is exactly included (our detailed description  below may not be accurate)

Description:

*This set is 100% Brand New and is an AFTERMARKET REPLACEMENT, it is comparable to OEM products.
*Please examine our images carefully to see what is exactly included (our listed description below may not be accurate)

Parts included:

1- Full Gasket Set:

  • 1- Head Gasket (Graphite material)
  • 2- O-Rings
  • 1- Valve Cover Gasket
  • 1- Thermostat Gasket
  • 1- Intake Manifold Gasket
  • 1- AGR Gasket
  • 1- Exhaust Manifold Gasket
  • 1- Cam Plug
  • 16- Valve Stem Seals (VITON)
  • 2- Cam Seals
  • 7- Grommets
  • 4- Spark Plug Tube Seals
  • 1- Conversion Set (lower set, includes Oil Pan Gasket, Rear Main Seal, and other small gaskets and seals)

1- Complete set of Pistons & Rings  (NPR or its equivalent):

  • Standard Diameter:     81.00mm
  • 1st Group:                     1.00mm
  • 2nd Group:                    1.20mm
  • Oil Ring:                        2.80mm

Available sizes for Pistons & Rings Set:
    • 81.00mm (Stock/Standard)
    • 81.50mm (+20 Oversize)

*Please  specify Oversize options upon Checkout Screen under "NOTES TO SELLER", message me with your oversize inquiry before purchasing.

1- Complete Engine Bearings Set

  • 1- Main Bearing Set
  • 1- Rod Bearing Set
  • 1- Thrust Washer Set

Available sizes for each Bearing Set:
    • 0.00mm (Standard)
    • 0.25mm (10 over)
    • 0.50mm (20 over)

It  is comparable to OEM parts, the parts we sell are aftermarket replacement   parts made by a long-standing company based in Taiwan.
*Please specify what size you  want for EACH Bearings upon purchasing
under "NOTES TO SELLER"

1- Engine Oil Pump

1- Timing Belt Kit:

  • Timing Belt (125 teeth)
  • Belt Tensioner (bearing assembly)

1- Water Pump:

  • Water Pump
  • Water Pump Gasket

Search Tags: Acura Integra 1990 1991 1992 1993 1994 1995 (90 91 92 93 94 95)
Engine Type: B18B1 (1.8L) - 1834cc L4 DOHC 16V
Fel-Pro Reference: HS 9698PT & CS 9689
NPR Reference:
10-753  or 10-733 (pistons & rings)
Bearing Reference: MB-9750  (main bearing), RB-989 (rod bearing), TW-990  (thrust washer)
Oil Pump Reference: OPH18L
Timing Belt Kit: TBK184
Water Pump Reference: 135-1270

Shipping and  Handling:

We try our very  best to process and ship out all orders promptly (within 1-2 business) of  payment receipt.  However, there may be times where unfortunate  circumstances may cause delay in the processing of orders by 1 day or so.   When this happens, we try to keep buyers informed and up to date with the  situation by email.

  • For domestic  shipping (within the U.S.), I will either utilize USPS or UPS as the  shipping courier.  The average shipping time is 2-3 business days  (this is the time-frame once the package has been processed and packed  for shipping).  We will send an email with the tracking number  included once the package is processed and ready for courier pickup.

  • For  international shipping, I use USPS Priority International only.   The shipping time usually averages 6-10 business days (this timeframe is  after the processing and packaging of the order for pickup).  Once  it has been processed, an email with tracking number will be sent to  you.

 *As  with everything, there may be delays in the  shipping time.  Such as bad  weather, holiday season rush, national holidays closures, postal strikes,  etc...

Warranty and Return  Policy:

14 Days Money Back Guaranteed!

Return:  All returns must be submitted within 14 days of receiving, along with  the original receipt or invoice. The shipping cost is not refundable.  You need to have return authorization by contacting us.  There will be a 10% restocking fee for item returned.

Warranty:  Performance part warrants its entire product to be free from defects in  workmanship and material under normal service conditions for a period of 60 days from the original date of purchase. This warranty is not  transferable, is valid to the original purchaser, and limited to the  replacement of a defective product only.

This limited warranty does not cover non-certified mechanic installs, labor  cost, damaged from accidents,  alterations, issues or modifications not intended by the manufacturer. All  warranty claims must be pre-authorized and returned prepaid to  CaliAutoParts.com for inspection and approval. This warranty does not cover  or assumes responsibility for any expenses, such as labor, towing, loading  fluids, oils or car rentals. This limited warranty gives you specific legal  rights, and you may have rights that vary from state to state. The above  limitations may not be applicable in your state.

**We strongly suggest/urge all parts to be installed by a certified  mechanic.  Parts broken due to home installations are NOT covered.   We will ask for proof of installation by a certified mechanic before all  approved warranty replacements.

Contact: *eBay message me* for any questions or request for a return  authorization!
I do my best to check my emails frequently, but keep in mind that our operating hours are from:  Mon - Fri (9:00 am-5:00 pm Pacific Standard Time).
 

Payment  Policy:

 


We accept PayPal,  bank issued certified checks, cashier checks and credit cards.  If you have any questions about payment, feel free to email us at *eBay message me*.

** PayPal payment is the fastest payment method for eBay transaction and we  highly recommend our customers to pay by PayPal.  All information will be secured.


  • About Us:
     

     


    We strive to provide quality-made aftermarket replacement parts  for engine rebuilds.  The products we sell are supplied by a very  well-established company with 10+ years in business.  We stand by their  products and have good faith that the parts are reliable.

    If for any reason you do not find the parts you receive to meet your  expectation, we will gladly talk to you and try our best to resolve any  issues you may have.  As part of our objective, we want to provide the best  experience when it comes to purchasing parts with us.  From answering  questions to proceeding to checkout for payment of items, we aim to help  make the entire process as seamless as possible. 

    You may contact us via:
    Email: *eBay message me*
    Phone: (626)475-2760

     

  • Engine Rebuilding Kits for Sale

    BMW M4 gets noisy (2013): listen to the new M4’s turbo straight-six here

    Tue, 13 Aug 2013

      With the unveiling of the new BMW M4 imminent, BMW’s excitement has got the better of it with the M Division releasing a video showing featuring the new M4’s engine note. The video might be called ‘BMW M is preparing something new’, but the engine isn’t really a fresh design. It’s actually a tweaked, twin-turbo version of the 435i’s 3.0-litre straight-six, making this the first M Division 3-series derivative to use forced induction.

    Analysis: why GM is pulling Chevrolet out of Europe

    Wed, 06 Nov 2013

    The news that Chevrolet is to leave the western European car market (while staying in eastern Europe and Russia) is not a huge surprise, but it provides an interesting contrast to the success of fellow Koreans, Hyundai and Kia. “Fellow Koreans?” you might say, “but isn’t Chevrolet American?” Yes and no. The Chevrolets we were getting were all made in Korea in the factories that used to be owned by Daewoo, except for the handful of Camaros and Corvettes, which were authentically American.

    Jaguar executive O'Driscoll to retire in March

    Mon, 11 Oct 2010

    Mike O'Driscoll, the managing director at Jaguar Cars, has announced his plan to retire at the end of March 2011. O'Driscoll, 54, moved to the United Kingdom to lead the company's brand after Ford announced its plan to sell Jaguar and Land Rover. While there, he managed the introduction of the XF, the XK, and the XJ.