Find or Sell any Parts for Your Vehicle in USA

Ford 331 4x4 Bronco Engine W/aluminum Heads By Tuff Dawg Engines on 2040-parts.com

US $4,295.00
Location:

Phoenix, Arizona, US

Phoenix, Arizona, US
Returns Accepted:ReturnsNotAccepted Warranty:Yes

FORD 331 STROKER ENGINE
302 Stroker Engine w/Aluminum heads
For 66-76 4x4 Bronco

FREE professional crating and shipping in
the continental US when you "Buy it Now"!
International shipping available please contact us!

If you are looking to upgrade that old, tired Ford 289 or Ford 302 in your 1966 to 1976 Bronco this Ford 331 stroker crate engine with aluminum heads by Tuff Dawg Engines is the answer. Using a Holley 4 barrel carb bolt pattern, this Ford 331 stroker engine will bolt right in place of your old 289 or 302 engine to wake up your Bronco and give it more power than it ever has had! This Tuff Dawg high performance engine puts the focus on low and midrange power, exactly where needed most in a 4x4. This engine works best with a Holley 570cfm Street Avenger carb for street and mild four wheeling. For those of you that get your Bronco on different angles when four wheeling we recommend using the Holley 670cfm Truck Avenger.

The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

  • 3.250" cast steel crank (use with 28oz flexplate or flywheel)
  • 5.400" rods with ARP rod bolts
  • 9 to 1 compression forged pistons

More special features of this engine include:

  • Seasoned block that has been vatted, magnafluxed for cracks, thermal cleaned and steelabrated, bored, honed and plateau honed to fit new flat top forged oversized pistons
  • Deck head gasket surface on block to ensure a good long lasting seal
  • There are many different piston, rod, and stroke combinations on the market today for the 331 and 347 Ford engines. Our combination has the longest rod length possible allowing the best rod angle in the market. The longer rod allows the piston to dwell longer at the top and bottom of the cylinder for a greater fuel/air charge. The forged piston we use is designed with the rings close to the top of the piston, allowing less gasses to get trapped in between the piston and cylinder wall minimizing detonation by allowing a cleaner, hotter burn. This is simply not possible with many of the other combinations available today. The oil ring on our engine does not intersect into the wrist pin making it a more reliable, stronger ring having less chance to flex and use oil like many other widely used combinations. We have seen many engines using these other combinations that have failed prematurely due to the poor oil ring land design that shortens engine life. So before you build or buy a stroker motor, do your homework, we have!
  • New Hydraulic flat tappet cam to put the focus on low end and midrange power
  • New Edelbrock Aluminum heads made of A356 aluminum
  • Heads have 2.02"Int/1.600"Exh stainless valves with undercut stems to improve flow
  • Both heads have been resurfaced to ensure a good long lasting seal
  • New Hardened exhaust seats for use with leaded or unleaded fuel
  • New High performance springs set up to match cam
  • New Valve seals
  • New Valve guides
  • New Screw-in rocker studs
  • New 1.6 roller tip rocker arms with balls and nuts
  • New Oversize pistons and rings
  • New Heavy duty double row timing set
  • New Oil pump
  • New Brass expansion plugs
  • New Main and rod bearings to fit 3.250" stroke crankshaft
  • New Edelbrock Air Gap aluminum intake manifold
  • All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with rear sump oil pan, dipstick and dipstick tube, timing cover, harmonic balancer, valve covers, and Edelbrock Air Gap aluminum intake manifold.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.

This engine is covered by a 1 year written warranty.
(There is no warranty when using a Blower, Turbo, Super Charger or NOS)

If you have any questions regarding this item please call us at
D&J Machine & Performance Engines
(602) 395-0800 Mon-Fri 8:00AM to 5:00PM MST

Current Phoenix Time

NOTE: Arizona does not observe Daylight Savings Time
or enginebuilder_1(at)yahoo(dot)com.


Here at D&J MACHINE & PERFORMANCE ENGINES we have over 38 years experience in building top quality affordable, streetable, performance engines.


Purchase:

"Buy it Now" for $4295.00. AZ residents add 8.3% tax. No core required!

Shipping:

Residents of the continental United States will get FREE shipping to your home or business address that is accessible by a tractor trailer rig! This is a retail savings of $200.00 to $600.00 in professional crating and shipping costs!

International shipping available, please contact us. D&J Machine will not be responsible for any customs delays or fees. ALL tariff and tax charges are the responsibility of the purchaser!


TERMS OF PAYMENT:

  • VISA, MASTERCARD, DISCOVER, AMERICAN EXPRESS
    • We are able to take your credit card orders over the phone!
      Just call (602) 395-0800 Mon-Fri 8:00am - 5:00pm MST
  • PayPal
    • If you are already a verified member of PayPal you may use this convenient method of payment
      Note: Can take 3-4 days to become verified for large ticket items
    Pay me securely with any major credit card through PayPal!
    Pay me securely with any major credit card through PayPal!
    Visa MasterCard Discover American Express eCheck

    Not what you are looking for?
    Please check out our other Auctions!

© D&J Machine & Performance Engines 1974 - 2012. All rights reserved
TuffDawgLogo ™ pending

Button Confirmed For Festival Of Speed

Fri, 30 May 2014

IT’S BEEN announced that 2009 Formula 1 World Champion Jenson Button will return to the Goodwood Festival of Speed on June 26-29, where he is expected to provide one of the event’s star attractions. Button is no stranger to the Festival of Speed and has attended 14 times previously, driving machinery as diverse as a 1970 Can-Am McLaren M8D, a P1 supercar and Alain Prost’s 1986 title-winning grand prix car. This year, McLarens attending the event include M23, MP4/2 and MP4-26 Formula 1 machines.

2012 Ford Mustang Boss 302 revealed

Fri, 13 Aug 2010

The 2012 Ford Mustang Boss 302 Petrolheads on this side of the Pond know what a Mustang is, even if we don’t exactly covet it. But it’s one thing not really coveting a 2011 V6 Mustang – even if it is much improved on the last version – but it’s quite another to ignore the ‘Super’ Mustang know as the Boss. Ford has announced the Ford Mustang Boss 302 for 2012, and they’re claiming they’ve used the M3 as a benchmark for handling.

Bugatti Veyron Grand Sport Vitesse gets a promo video

Thu, 12 Apr 2012

Bugatti Veyron Grand Sport Vitesse promo video With the Bugatti Veyron Grand Sport Vitesse officially available Bugatti has decided it needs its own promotional video. Bugatti revealed the Veyron Grand Sport with the heart of the Super Sport as the Veyron Grand Sport Vitesse in February, ahead of a public debut at the Geneva Motor Show in Geneva. And it’s the ultimate syrup-shredder.