Find or Sell any Parts for Your Vehicle in USA

Ford 460/512hp Crate Engine W/aluminum Heads By Tuff Dawg Engines on 2040-parts.com

US $4,995.00
Location:

Phoenix, Arizona, US

Phoenix, Arizona, US
Returns Accepted:ReturnsNotAccepted Warranty:Yes

FORD 460/512HP
Hi Performance Balanced Engine

FREE professional crating and shipping in
the continental US when you "Buy it Now"!
International shipping available please contact us!

This Ford 460 crate engine by Tuff Dawg Engines would be EXCELLENT for a street/strip car, street rod, pickup (engine comes with front sump oil pan so if it is going into a pickup the oil pan would need to be changed). Remove that old worn out Ford 429 or Ford 460 and install this 512HP Ford 460 crate engine by Tuff Dawg Engines to bring your ride to life! This Ford 460 does not just have horsepower, it also has 507 ft lbs of torque at 5000rpm to really push you back in the drivers seat! This engine will run on leaded or unleaded Premium fuel. Works best with 2800 stall speed torque convertor (not included) and comes with a new automatic transmission flexplate.

The balanced rotating assembly (typically includes crankshaft, forged pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

  • 3.850" stroke cast iron crank
  • 6.605" big beam forged rods with ARP rod bolts
  • 10½ to 1 compression pistons

More special features of this engine include:

  • Seasoned 2-bolt main block, vatted, magnaflux checked for cracks, thermal cleaned, steelabrated, bored and honed and plateau honed to fit new pistons
  • Deck head gasket surface on block to ensure a good seal
  • New CompCams Hydraulic flat tappet cam with .584"Int/.588"Exh valve lift
  • Aluminum heads with 2.245"Int/1.744"Exh Cobra Jet size stainless swirl polished valves with undercut stems to improve flow - similar to Cobra Jet head
  • Screw-in studs and guide plates
  • New Hardened exhaust seats for use with leaded or unleaded fuel
  • New 1.440" high performance springs set up to match cam
  • New Spiral-type valve guides for better oil retention
  • New High temperature valves seals
  • New Hardened push rods
  • New Adjustable roller tip rocker arms
  • New Perfect Circle rings
  • New Double row timing set
  • New Oil pump with steel drive shaft and bolt on oil pickup tube
  • New Brass expansion plugs
  • New Edelbrock Performer RPM aluminum intake manifold. This dual plane intake constant cross-sectional area design builds low end and mid-range acceleration while optimized runner path make top-end hp
  • This engine takes a square bore carb. It works best with a 850cfm carb (not included)
  • All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with oil pan, timing cover, harmonic balancer, valve covers, and Edelbrock intake manifold. We even supply a new a/t flexplate with this engine.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.

This engine is covered by a 1 year written warranty.
(There is no warranty when using a Blower, Turbo, Super Charger or NOS)

If you have any questions regarding this item please call us at
D&J Machine & Performance Engines
(602) 395-0800 Mon-Fri 8:00AM to 5:00PM MST

Current Phoenix Time

NOTE: Arizona does not observe Daylight Savings Time
or enginebuilder_1(at)yahoo(dot)com.


Here at D&J MACHINE & PERFORMANCE ENGINES we have over 38 years experience in building top quality affordable, streetable, performance engines.


Purchase:

"Buy it Now" for $4995.00. AZ residents add 8.3% tax. No core required!

Shipping:

Residents of the continental United States will get FREE shipping to your home or business address that is accessible by a tractor trailer rig! This is a retail savings of $200.00 to $600.00 in professional crating and shipping costs!

International shipping available, please contact us. D&J Machine will not be responsible for any customs delays or fees. ALL tariff and tax charges are the responsibility of the purchaser!


TERMS OF PAYMENT:

  • VISA, MASTERCARD, DISCOVER, AMERICAN EXPRESS
    • We are able to take your credit card orders over the phone!
      Just call (602) 395-0800 Mon-Fri 8:00am - 5:00pm MST
  • PayPal
    • If you are already a verified member of PayPal you may use this convenient method of payment
      Note: Can take 3-4 days to become verified for large ticket items
    Pay me securely with any major credit card through PayPal!
    Pay me securely with any major credit card through PayPal!
    Visa MasterCard Discover American Express eCheck

    Not what you are looking for?
    Please check out our other Auctions!

© D&J Machine & Performance Engines 1974 - 2012. All rights reserved
TuffDawgLogo ™ pending

McLaren 12C Spider teased

Fri, 29 Jun 2012

McLaren has started to tease the 12C Spider – the convertible 12C – ahead of full details in the next few days. We’ve know that a convertible version of the McLaren MP4-12C – the 12C Spider – has been on the way for some time, but now it’s almost here. We thought McLaren would just come out and introduce the 12C Spider, but they can’t resist teasing, although we wonder if  McLaren might be trying to take some of the gloss off the UK debut of the Ferrari 458 Spider at Goodwood this weekend by revealing the 12C Spider before the end of the Goodwood weekend?.

Race and refuel with the Octane 120 Pro Beer Arcade gaming system

Mon, 18 Apr 2011

While no one at AutoWeek would ever condone drinking and driving, kicking back with a few while playing your favorite racing simulator is a different story. And if you're going to go down that road, go all the way with the Octane 120 Pro Beer Arcade from Dream Arcades. What is a Beer Arcade, you ask?

Cadillac CTS Coupe (2010) – Official

Mon, 23 Nov 2009

Cadillac will launch the CTS Coupe in Spring 2010 Having let the cat out of the bag over plans for a range-topping Cadillac CTS-V Coupe (and the CTS-V Wagon) the other day, GM has now released official detail of its less powerful sibling, the CTS Coupe, which will launch in the Spring of 2010, so as is American convention we should probably call it the 2011 Cadillac CTS Coupe (the American car industy is as bad as the fashion industry – everything is ‘Next Year’). The CTS Coupe joins the Saloon (Sedan) and Estate (Wagon) to complete the three model lineup for the CTS, and is by far the best looking of the bunch, although to be fair both the saloon and estate are attractive in a bold, American kind of way. Sitting a couple of inches lower than the saloon, the Coupe is also a couple of inches shorter.