Ford 460 532 555 514 557 Stroker Marine Rebuilt Engine Alumium Head Mustang on 2040-parts.com

  Hello, this auction is for a completely rebuilt 532 cubic inch big block Ford engine.  This started out as a 460 Ford, it has been bored .030 oversize and stroked.  If you have a car or a boat with a 460 or are planning building something with a big block Ford here is a chance to get a race ready engine at a bargin basement price.  This auction is for a longblock less camshaft, lifters, pushrods, and rocker arms.  New cam bearings are installed and it is ready for valvetrain of your choice.  The work done to this engine is as followes:

1.  Engine block has been oven cleaned, shot peened and magnafluxed.  It has no cracks, repairs, damage or sleeves. 

2.  After cleaning the block has been square decked, bored, and Moly honed to .030 oversize.  Both the boring and the decking is preformed in an RMC fully automatic CNC machine.  This ensures all of the cylinders and the deck surface are completely parrell to the main journals.  During the honing process torque plates are used to elimante cylinder wall distoration and make for perfect ring sealing.  Prior to assembly all threaded holes were chased, new freeze plugs, oil galley is a, crank is a  SCAT cast steel 4.300 stroke crank, this is an exellent quality crankshaft with a full .125 raidus on both the main and connecting rod journals.  Connecting rods are forged steel comp I beams, they are 6.800 long.  These rods feature 7/16 cap screw bolts, and full floating wrist pins.  The entire rotating assembly has been Correctly balanced.  Most machine shops skip this very important step due to the increased time and cost.  This engine will run smooth and have no vibration.  When you assemble the motor you will need to use a 1979 and up 460 Ford balancer and flywheel.  The correct flywheel and balancer will have a weight(EXTERNAL BALANCED).   

4.  Pistons in the engine are Probe industries forged racing aluminum SRS series.  They are Flat top and with the heads installed on this engine they yield a 10.25:1 comperssion ratio.  This works out great for pump gas. 

5.  Heads on this engine are ProComp motorsports aluminum.  They are as cast ports with 2.25x1.71 valves.  Heads have high flowing D shaped exhaust ports and standard 460 size round intake ports.  They accept standard exhaust headers and intake manifolds.  The heads are completely assembled with all ProComp components, stainless steel valves, chromolly retainers, 7/16 screw in studs, and guideplates for 3/8 pushrods.  Valve springs are also manufactured by ProComp, they are 1.550 diameter with 130lbs closed pressure.  They will accomadate up to a 650 lift and work well with most mechanical and hydraluic flat tappet and roller camshafts.Heads are bolted down and torqued with a new set of ARP studs with 12 point nuts and washers!!

6. This engine with a 850cfm holley carburetor and a air gap intake manifold will produce 652hp and 715 foot pounds of torque all on 91 octane fuel!!!!

   This engine is ready to install valve train and assemble.  As I have said before this would make for a great marine engine or a street torque monster.  Local pickup and California residents must pay 8.975% sales tax or furnish a completed resale card for my records.  If you have questions please e-mail.Shipping will be 500.00 to 900.00 depending on location plus crate, insurance Thanks for looking.