Find or Sell any Parts for Your Vehicle in USA

Ford Circle Track Sealed 490hp Engine M-6007-s374t on 2040-parts.com

US $7,500.00
Location:

Phoenix, Arizona, United States

Phoenix, Arizona, United States
Condition:New Brand:FORD FACTORY Country/Region of Manufacture:United States Manufacturer Part Number:M-6007-S374T

NEW FORD CIRCLE TRACK SEALED 490HP ENGINE M-6007-S374T

Ford Racing Sealed Racing Engine with the 490 Horsepower S374T engine developed for Circle Track and Off-Road racing.  These Ford Sealed Racing Engines are built to professional racing series standards to deliver reliable and lasting performance. They are not built from any repackaged production parts, only real racing parts that start with the Ford Racing BOSS 351 Block, adds Eagle® forged steel crankshaft, steel I-beam rods and forged Mahle® pistons with full floating pins and is topped with Z-Heads. Each engine is hand assembled with racing clearances. Designed and developed for circle track and off-road racing where spec or sealed engines are required 374 cubic inches  4.125" bore - 3.500" stroke 9.2 deck BOSS 351 block with 4-bolt mains 490 HP @ 6,200 / 450 lb.ft. torque @ 5,100 w/ MSD® Atomic Fuel Injection System 10.5:1 compression ratio Eagle® Forged steel crankshaft Eagle® forged steel I-beam connecting rods Mahle® forged pistons M-6049-Z304DA "Z" Aluminum cylinder heads w/ 2.02" intake and 1.60" stainless steel valves Edelbrock® Super Victor Intake manifold Hydraulic roller tappet camshaft,M-6250-F303 - .528" lift intake and exhaust, 226 degree intake duration @ .050" and  226 degree exhaust duration at .050" PAC® 1218 ovate beehive valve springs  1.65:1 Roller Rocker Arms Double roller timing chain M-6268-B302 8 quart steel rear sump oil pan  Edelbrock® water pump SFI approved harmonic crankshaft balancer MSD® Billet distributor ARP®  Head Studs Ford Racing polished aluminum Circle Track valve covers M-6582-CT   Factory sealed for competition Engine is internally balanced, "0" balance flywheel required Flywheel is not included INSTALLATION NOTES: See engine installation and tuning tips. Some or all of the following items may need to be changed from your original engine or modified for proper installation: This engine has a rear sump performance oil pan and pickup, regular rotation timing cover and regular rotation water pump, and Circle Track valve covers. Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump A standard rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers are available Damper M-6316-D302, may require a spacer for pulley alignment. Flywheel M-6375-D302 not included should work for most 157-tooth manual transmission applications. For other transmission applications use the proper "0" balance flywheel. Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). Built with current available parts. 
 
Photos are of the engine in this listing in it's original shipping  create.

If you have questions email me. 

See my other Ford engine listing.

Mercedes B55 (2011) - a ballistic V8 B-class

Fri, 31 Dec 2010

Mercedes' tuning arm AMG has not yet ventured into sensible B-class territory, but a bunch of Merc trainees in Germany has come up with this: the B55. It's a V8-powered B-class, complete with AMG-spec 383bhp 5.5-litre V8 mounted up front and driving an old W210 E-class rear axle. Sounds like a promising skunkworks special, derived from an old B200 CDI hack that was kicking about the training centre.

Series 51 Bentley Continental Frankfurt launch

Thu, 10 Sep 2009

A series 51 Bentley customised interior But these sorts of services are normally only offered at the very top end. But to make it easier for customers on their ‘Entry-Level’ models, Bentley is launching ‘Series 51‘, a set of customisation options for the Bentley Continental GT and GTC. Series 51 is named after the year in which Bentley’s original styling department was created by John Blatchley.

Dodge Charger SRT Hellcat (2015): the world’s fastest saloon

Thu, 14 Aug 2014

By Tim Pollard First Official Pictures 14 August 2014 17:10 Following hot on the heels of the Dodge Challenger SRT Hellcat comes the four-door version - the new Charger SRT Hellcat, unveiled this week and due to be built from early 2015. The company claims it’s the ‘quickest, fastest and most powerful sedan in the world,’ and a quick look at the specs suggests they’ve created a super-saloon to shame the fastest four-doors from Europe. The new four-door Hellcat packs a 707bhp punch and is capable of a standing quarter mile in just 11.0sec.