Find Fragola Washer For 491951, 966977 9/16" I.D. (Part# 999102) in Riverside, California, US, for US $2.00

Returns Accepted:ReturnsNotAccepted Manufacturer Part Number:999102 Part Brand:Fargola Surface Finish:Aluminum Warranty:No

Get connected with the finest aluminum and steel fittings from Fragola. Come in packs of 10

Whether you need bulkheads, tees, unions, reducers, swivels, couplers or elbows to complete your plumbing job, look no further than Fragola for the finest fittings and adapters available. To the people at Fragola, engineering is the key, and perfecting their hose ends and fittings is serious business.

GETTING THE MOST FROM YOUR INVESTMENT

Please be certain to properly assemble the hose & ends.

When doing any plumbing job, be sure to route the hoses far away from heat sources like the exhaust system. Secure the lines at various points to retain them from moving.

Use a few drops of motor oil on the threads and the seat area of the hose end. The seal is made on the 37 degree flare. Be careful not to over tighten the hose ends so as not to damage the flare.

A word about anodizing...At Fragola Performance Systems, we use a process that is called "bright-dip". The anodizing process is not an exact science like painting. The colors will vary from batch to batch, plus the sun, heat, and time will cause some fading. Various alloys of aluminum will anodize with different hues.

Where engineering counts! Hose ends may look alike, but at Fragola Performance we take them seriously. We have spent years researching, testing, and generally perfecting this 50-plus-year -old design. We feel that this catalog contains the finest hose ends made. PERIOD!

1. Unique one-piece design eliminates two braze joints, eliminating the potential for leakage, and improving flow and appearance.
2. Two Viton "O" rings form a redundant seal to ensure no-leak service for the life of the hose end.
3. Stainless steel lock wires prevent galling and assure smooth operation.
4. Wider wrenching surface for a no-slip installation.
5. Tapered nipple for easy alignment and installation.
6. "J" gauge threads for increase strength.
7. Bright dip anodizing for a show quality finish.
8. Improved entry angle on the socket eases hose installation.

3000 Series Race
Hose Ends

1. Unique ONE-PIECEdesign eliminates two brazed joints, minimizing potential leakage, improving flow and appearance.

2. Two Vitonï¾® "O" rings form a redundant seal to ensure no-leak service for the life of the part and are impervious to fuel, oil and coolant.

3. Stainless steel lock wires to prevent galling and provide long service.

4. Wider wrenching surface for a no slip installation.

5. Tapered nipple for easy alignment and installation.

6. J gauge threads for increased strength and durability.

7. Bright dipped anodizing for a show quality finish.

8. Improved entry angle on the socket, allows for easy installation.

All Hose Ends are manufactured from aerospace quality aluminum and machined to mil spec tolerances.

8000 Series Push-Lite Race Hose Ends

Where engineering counts! Hose ends may look like simple devices, but at FPS we take them very seriously. We have spent several years researching, testing and retesting to perfect the production of what we feel is the finest hose end available. Period! We hope that you will agree.
1. Unique ONE-PIECEdesign eliminates two brazed joints, minimizing potential leakage, improving flow and appearance.

2. The correct A-N specified "J-Thread", for ease of installation, and trouble-free reuse.

3. Lightweight polymer cap provides positive stop for hose installation, and cover cut end of the hose.

4. Hose barb dimensions per S.A.E standards.

5. Bright dip anodizing for a show quality finish. All Push-Lite hose ends are manufactured from aerospace quality and machined to milispec tolerances.

6. Tapered nipple for easy alignment and installation.

All Hose Ends are manufactured from aerospace quality aluminum and machined to mil spec tolerances.

Chicago auto show: Ford Transit Connect van targets businesses

Mon, 09 Feb 2009

The demise of the Freestar (more commonly remembered as the Windstar) minivan left Ford without a small cargo carrier it could pitch to business and fleet customers who didn't need the hugeness of the E-series van. That gap in the product lineup gets filled this summer with the front-drive Transit Connect van--a product Ford has been selling in European and Asian markets for six years. Ford rolls out the U.S.

U.S., European models are hot at 2009 Tokyo Special Import Show

Fri, 10 Jul 2009

There are times when we have to wonder whether there really is a global economic crisis; the Tokyo Special Import Show is one of those times. The show in mid-June was all about bling--lots of it--with just enough performance pizzazz to liven things up. It's ironic that while U.S.

Budget 2009 - UK gets £2000 scrappage scheme

Wed, 22 Apr 2009

By Ben Pulman Motor Industry 22 April 2009 15:15 Chancellor Alistair Darling has announced a £2000 car-scrapping incentive, and a surprise 2p per litre increase in fuel tax in the latest budget. Darling delivered his Budget speech at 12.30pm GMT today. Scroll down the page to see our edited highlights of the 2009 Budget, read in-depth details of the scrappage scheme and see how the motor industry has responded.

Fragola Washer For 491951, 966977 9/16" I.d. (part# 999102) on 2040-parts.com

Hoses, Lines & Fittings for Sale

Chicago auto show: Ford Transit Connect van targets businesses

U.S., European models are hot at 2009 Tokyo Special Import Show

Budget 2009 - UK gets £2000 scrappage scheme