Find or Sell any Parts for Your Vehicle in USA

Front + Rear Bumper Jeep Wrangler Jk 2007-2014 Ko Off Road Rock Stinger Black on 2040-parts.com

US $655.00
Location:

Seeley Lake, Montana, US

Seeley Lake, Montana, US
Item must be returned within:30 Days Refund will be given as:Money Back Return shipping will be paid by:Buyer Restocking Fee:No Return policy details: Returns Accepted:Returns Accepted Brand:KO Off Road Manufacturer Part Number:FBSHTB-04 + RBSOTB-04 Placement on Vehicle:Array Surface Finish:Powdercoated Textured Black Warranty:Yes Part Brand:KO Off Road

 

KO Off Road Front Bumper 04

The KO Off Road Wrangler Bumper is the ultimate rock crawler and extreme off road bumper. The KO Off Road Bumper line was engineered after extensive research and development to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance. With 3/16" cold rolled steel bars and robotically welded to exact specifications, these bumpers are built to last and withstand the roughest off road abuse. Welds are ground and finished to give a one piece look. A two-stage textured matte black powder coating is applied for rugged functionality that will last years and a provide the ultimate style for your Wrangler. The front stinger is manufactured from 1.75" tubing, has two tabs for LED lighting installation, and is drilled to accommodate any LED wiring through the frame. A winch mounting plate is included that accepts up to 12,750 lb winch with the option of running an aluminum or roller fairlead. Each bumper was developed to be a complete bolt on and requires no modifications to your vehicle. The KO Off Road Front Bumper fits 2007-2013 Jeep Wranglers. Don't buy from other sellers with knock off brands. Buy from KO Off Road who understands applied Off Road engineering and stands behind the quality of it's products for years to come.

 

  •     Manufactured from 3/16 cold roll steel
  •     1.75" 120 wall over rider and kickers
  •     Raised corners for better entry and exit under the most extreme conditions
  •     Solid Mount Galvanized D-Rings
  •     Solid plate center section that wraps the frame horns and lower cross member
  •     Built in winch plate to accommodate up to 12,750 lb winches
  •     One-Piece welded design
  •     Two Stage Textured Matte Black Powder Coated Finish
  •     All Mounting Hardware Included 
  •     Direct Bolt on Design (No Modifications Required)

KO Off Road Rear Bumper 04

The KO Off Road Wrangler Rear Bumper is the ultimate rock crawler and extreme off road bumper. The KO Off Road Bumper line was engineered after extensive research and development to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance. With 3/16" cold rolled steel bars and robotically welded to exact specifications, these bumpers are built to last and withstand the roughest off road abuse. Welds are ground and finished to give a one piece look. A two-stage textured matte black powder coating is applied for rugged functionality that will last years and a provide the ultimate style for your Wrangler. The KO Off Road Rear bumper included galvanized D rings and tow hitch receiver. This bumper is designed for  extreme off road conditions when protecting your vehicle requires more than the stock plastic bumper. Each bumper was developed to be a complete bolt on and requires no modifications to your vehicle. The KO Off Road Rear Bumper fits 2007-2013 Jeep Wranglers. Don't buy from other sellers with knock off brands. Buy from KO Off Road who understands applied Off Road engineering and stands behind the quality of it's products for years to come.

 

  •     Manufactured from 3/16 cold roll steel
  •     1.75" 120 wall over rider and kickers
  •     Raised corners for better entry and exit under the most extreme conditions
  •     Solid Mount Galvanized D-Rings
  •     Solid plate center section that wraps the frame horns and lower cross member
  •     One-Piece welded design
  •     Heavy duty design for rugged off road use
  •     Two Stage Textured Matte Black Powder Coated Finish
  •     All Mounting Hardware Included 
  •     Direct Bolt on Design (No Modifications Required)

 

***2011-2013 Jeeps do not require a vacuum pump relocation kit. This bumper will fit with the vacuum pump at it's current location***

 

Ask about our package deals and save hundreds on KO Off Road Products. Additional products include:

LED Lighting

Front Bumpers

Rear Bumpers w/ tire carrier

Winches (Synthetic and Cable)

Rock Rails

Light Bars

and More


Shipping is offer is only valid for the continental U.S.


If you have any questions, please let me know!



Check out my other items!



Please feel free to contact me at (866) 277-3407 if you have any questions regarding this item. I will be available from 8am to 5pm Monday through Friday by telephone.

Thanks!


Note: We have several warehouses across the country where we stock our product. The location your item will ship from is determined by the customer's location and the available inventory in these locations. No extra shipping charges will be applied regardless of the shipping location.

Bumpers for Sale

Porsche Cayman (2013) first official photos of 981

Wed, 28 Nov 2012

One of our favourite Porsches on sale is being replaced – and this is it: the new 2013 Porsche Cayman. Essentially a tin-top coupe Boxster, the new 981-series Cayman was unveiled today in the fitting location of Los Angeles. It's the Mk2 Cayman, after 2005's original first spawned a Boxster coupe for the sub-911 masses.

Hyundai heading for more dual clutch gearboxes instead of CVT

Wed, 31 Oct 2012

Hyundai are planning to offer more dual clutch gearboxes in their cars rather than going the CVT route. There’s an argument that somehow CVT gearboxes offer better fuel economy than an automated dual clutch ‘box, even though logic says otherwise. Toyota insist on using a CVT ‘box on their hybrid cars when they’d feel much better to drive with an auto or dual clutch ‘box.

Audi to reveal 230hp S1

Wed, 22 Jan 2014

Audi is expected to reveal a 230hp quattro S1 at the Geneva Motor Show in March. The hot version of its A1 city car will be powered by the turbocharged 2.0-litre engine used in the Audi S3, and come with four-wheel drive as standard. On Bing: see pictures of the Audi S1 Find out how much a used Audi A1 costs on Auto Trader An Audi spokesman would not confirm the rumours, although the S1 is believed to have been spotted undergoing tests in Sweden.