Fuel Injectors Ultimate Upgrade 1992-1997 Mercury Grand Marquis 4.6l V8 Gs Ls on 2040-parts.com

Price is for a set of 8 reconditioned fuel injectors!

Professionally Reconditioned and Flow Matched using the Industry Leading ASNU Machine!

YOU WILL GAIN PERFORMANCE AND GAS MILEAGE WITH A FLOW MATCHED SET OF OUR INJECTORS, EVEN IF YOUR FUEL INJECTORS ARE RELATIVELY NEW, FUEL DEPOSITS AND CARBON BUILD UP CAN BEGIN TO AFFECT FUEL INJECTOR'S PERFORMANCE IN AS LITTLE AS 3 - 4 YEARS

 

THESE ARE NOT STOCK FUEL INJECTORS!

These injectors are Generation III BOSCH fuel injectors with an IMPROVED 4-hole spray pattern for increased fuel atomization! These injectors are the ULTIMATE upgrade for your FORD Car!

 

Great for PERFORMANCE applications and to increase FUEL ECONOMY!

 

These were factory injectors for certain Ford V8 cars. They are, however, compatible with ALMOST ALL Ford V8 Cars 1985-2004.

Take advantage of newer fuel injector technology at a lower price than stock injectors!

These BOSCH Design III (3) injectors are direct replacement for the Design II (2) or Design I (1) that your vehicle came with. The Design 3 injector has an improved spray pattern and internal metering system.

The Design 3 injector breaks the fuel down into a much finer mist than its predecessors, this process is known as fuel atomization. Gasoline is much more combustible as a vapor than it is as a liquid and, the more vaporous the fuel is when it enters your engine, the more efficiently it will burn. The increase in fuel atomization created by the newer Design 3 injectors allows your engine to make better use of its fuel and increases engine economy and power.

 

These injectors maintain COMPLETELY STOCK flow rate and fitment.

NO MODIFICATIONS ARE REQUIRED!

These injectors are a direct "plug-and-play" product.

 

FOR LESS THAN THE PRICE OF CHEAP AFTERMARKET UNITS, WHY NOT UPGRADE TO THE BEST THAT BOSCH HAS TO OFFER?

  

THIS SET OF INJECTORS WILL FIT THE FOLLOWING APPLICATIONS :

 

Factory Ford part numbers these injectors will replace:

CM5041
E5TE-A1A
E5TE-A1B
E5TE-A2A
E5TE-A2B
E5TE-A3A
E5TE-A3B
E5TE-B1B
E5TE-A1A
E5TE-A1B
E5TE-A2A
E5TE-A2B
E5TE-A3A
E5TE-A3B
E5TE-B1B
F07F-9F593-CA
F07F-CA
F07F-DA
F0TE-9F593-B1A
F0TE-9F593-C3A
F0TE-9F593-D1A
F0TE-9F593-D5A
F0TE-9F593-D9B
F0TE-B1A
F0TE-C3A
F0TE-D1A
F0TE-D5A
F0TE-D9B
F2TE-9F593-A3A
F2TE-A3A

THESE ARE ORIGINAL BOSCH INJECTORS , NOT CHEAP AFTERMARKET UNITS !
PART NUMBERS AND COLORS VARY FROM MODEL TO MODEL AND YEAR TO YEAR, DO NOT WORRY IF YOUR INJECTORS "LOOK" DIFFERENT, WE KNOW WHAT FACTORS DETERMINE PROPER FUNCTION AND WE ARE GLAD TO EXPLAIN TO YOU WHY THESE WILL WORK ON THE VEHICLES LISTED !

Our injectors are rebuilt through the following process ;

1. Visual inspection for any physical damage that would render the injector inoperable

3. Any dirt, grease and paint is removed from the outside of each injector

2. All soft parts are removed ( o-rings, filters, caps etc… ) YES THE FILTERS “INSIDE EACH INJECTOR” are removed !  

4. All injectors are submerged in a cleansing bath under “ULTRASONIC VIBRATION” This powerful vibration with the presence of the concentrated cleaning solution breaks down all deposits and sludge built up inside each injector. The injectors are pulsed open and closed rapidly during this process to help remove contaminants.

5. All injectors are then FLOWED BACKWARDS under high pressure to flush out any remaining contaminants

6. All injectors are flowed and we look for a good evenly distributed spray pattern and proper electronic operation and current draw, along with a high pressure leak test.

7. All injectors are grouped in flow matched sets within 1% variance ( factory allows a variance of usually 3%-5% )

7. All metal bodied injectors are clear coated or repainted for that “like new” look.

8. All o-rings caps and filters are replaced and the injectors are then packaged.

 

All of our injectors come with a 100% satisfaction guarantee, if you are unhappy for any reason we will make EVERY effort to resolve the situation. We have spent a substantial amount of time to perform research and study on which injectors work properly in which applications, and we assure you that the injectors you receive will work flawlessly on the vehicles in the compatibility list. If you are using them on ANY other type of application other than described in the ad, please assume responsibility for proper fitment and application, or ASK us prior to purchasing ! We would be glad to answer any questions you have. All warranty issues will be resolved by exchange, refunds ONLY IF we no longer have the correct units available for exchange. Please contact us and give us the opportunity to make you happy prior to leaving feedback !

All of our shipping is done through priority mail, or express mail. Priority mail is FREE to ANYWHERE in the United States and territories thereof, $15.00 to Canada, and $20.00 anywhere else in the world. ALL EXPRESS MAIL ORDERS PLEASE CONTACT US PRIOR TO PURCHASING SO THAT WE CAN MAKE SURE WE ARE ABLE TO SHIP IMMEDIATELY TO AVOID ANY DELAYS !!! If we are able to ship express mail the price for doing so is $15 within the USA, $30 to Canada, and $40 anywhere else worldwide.

THERE IS NO CORE CHARGE OR ANY OTHER HIDDEN FEE’S OR CHARGES ON ANY OF OUR SETS!
IF YOU HAVE INJECTORS THAT NEED TO BE SERVICED PLEASE LET US KNOW AND WE CAN RUN AN EBAY ADD OFFERING THE RECONDITIONING SERVICE TO YOU ALONG WITH OUR WARRANTY.

DO YOURSELF A FAVOR, DON’T BUY SOME CHEAP USED SET OF INJECTORS OFF EBAY FOR YOUR VEHICLE, THEY ARE USED INJECTORS AND WERE MOST LIKELY REMOVED FOR A REASON…… AND SOME SELLERS SELL INJECTORS THAT ARE “USED BUT WE TEST THEM” ….. HOW ? ON A VEHICLE ? WITHOUT THE PROPER EQUIPMENT THAT’S THE ONLY WAY TO TEST THEM, AND THEY MAY BE WORKING, BUT THEY ARE NOT AT 100% CONDITION. DON’T FORGET, FLOW MATCHED INJECTORS AND “PROPERLY” WORKING INJECTORS WILL HELP YOUR VEHICLE ACHIEVE OPTIMAL GAS MILEAGE AND PERFORMANCE, IF YOU HAVE ANY QUESTIONS AT ALL PLEASE EMAIL US !!!