Description

Brand new generator stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• All products shipped are tested
• One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Vehicle models fitment

Yamaha Mountain Max 600 Carb L/C 2002
Yamaha Mountain Max 700 Carb L/C 2001-2003
Yamaha SX 600 Carb L/C 2002
Yamaha SX 600 R Carb L/C 2003
Yamaha SX 700 Carb L/C 2001
Yamaha SX Venom 600 Carb L/C 2004-2006
Yamaha SX Venom 600 ER Carb L/C 2004-2005
Yamaha Venture 600 Carb L/C 2002-2006
Yamaha Venture 600 Carb L/C 2-Pass 2005
Yamaha Venture 700 Carb L/C 2001-2003
Yamaha V-Max 600 Carb L/C Deluxe 2002
Yamaha V-Max 600 ER Carb L/C 2003
Yamaha V-Max 700 Carb L/C Deluxe 2001-2002

OEM part replacement

8DM-81410-00-00

Specifications

Dimensions :
Interior diameter : 43mm
Exterior diameter : 104mm
Thickness : 19mm
Length of wires stator to grommet : 40mm
Length of wires grommet to plug : 200mm
Length of pickup coil's wire to grommet : 55mm

Other specifications :
Number of wires : 5
Number of plugs : 2
Number of pins : 5

Wire to wire resistance :
Alternator : White between each White = 0.4ohms +/-20%
Pickup : Green to Red = 213ohms +/-20%

Instructions

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Videos

Customer service at a glance

Returns only apply to new unused products purchased with in the last 30 days. Please visit our store's complete return policy for more details.
For more details regarding a one year limited warranty, please visit our store's complete warranty policy.

RM STATOR around the world