Find or Sell any Parts for Your Vehicle in USA

Genuine Bosch 4 Hole Ev6 Upgrade Fuel Injectors 1999-2004 Jeep 4.0l Tj,wj,xj on 2040-parts.com

US $129.99
Location:

Tacoma, Washington, US

Tacoma, Washington, US
Item must be returned within:60 Days Refund will be given as:Money back or exchange (buyer's choice) Return shipping will be paid by:Buyer Return policy details:1 YEAR UNLIMITED MILEAGE WARRANTY AGAINST FAILURE UNDER NORMAL OPERATING CONDITIONS Returns Accepted:Returns Accepted Restocking Fee:No Manufacturer Part Number:0 280 155 923 Interchange Part Number:SIEMENS DEKA 04854181 Warranty:Yes Part Brand:GENUINE BOSCH TYPE III EV6 DIRECT FIT UPGRADE:'99-'04 TJ,XJ,WJ WITH 4.0L ACCEPTS EXISTING CONNECTORS &:FUEL RAIL CLIPS 1 YEAR WARRANTY:UNLIMITED MILEAGE

FREE USPS PRIORITY MAIL SHIPPING

1 YEAR UNLIMITED MILEAGE WARRANTY

SET OF 6 FLOW MATCHED GENUINE BOSCH EV6 UPGRADE FUEL INJECTORS

SAVE FUEL!($$$)

INCREASE PERFORMANCE!

REDUCE EMISSIONS!

WITH THIS SET OF 6 REMANUFACTURED BOSCH DESIGN III (EV6)UPGRADE FUEL INJECTORS WITH 4 HOLE DISCHARGE NOZZLE FOR ALL 1999-2004 TJ,XJ & WJ JEEP MODELS WITH 4.0L ENGINE. THESE INJECTORS USE THE EXISTING "USCAR" TYPE CONNECTORS AND FUEL RAIL CLIPS FOR A DIRECT FIT,PLUG & PLAY INSTALLATION WITH NO ADDITIONAL MODIFICATIONS REQUIRED.(NEW FUEL FILTER RECOMMENDED)

THESE GENUINE BOSCH EV6 DESIGN III INJECTORS ARE A POPULAR AND PROVEN UPGRADE/REPLACEMENT FOR THE FACTORY SIEMENS DEKA UNITS AND ARE WELL KNOWN FOR THEIR DURABILITY AND RELIABLE PERFORMANCE.THE 4 HOLE DISCHARGE NOZZLE DESIGN OFFERS SUPERIOR FUEL ATOMIZATION VS. THE SINGLE PINTLE VALVE SIEMENS INJECTORS, (SEE PHOTO) ALLOWING FOR MORE EFFICIENT,COMPLETE COMBUSTION.THIS PROVIDES SEVERAL KEY BENEFITS INCLUDING:

*LESS UNBURNT FUEL (LOWER  EMISSIONS)

*IMPROVED FUEL ECONOMY

*IMPROVED THROTTLE RESPONSE  

*INCREASED PERFORMANCE THROUGHOUT THE RPM RANGE

*SMOOTHER IDLE

   *IMPROVED TOWING PERFORMANCE 

*ELIMINATES HARD STARTING ISSUES  

 

COMBINED CITY/HWY INCREASE OF 2-3 MPG IS TYPICAL

AT 38-57 MILES PER TANK,THESE INJECTORS WILL LITERALLY PAY FOR THEMSELVES!

JUST A FEW
ACTUAL CUSTOMER COMMENTS IN MY SELLERS' FEEDBACK:

 

"THE INJECTORS ARE PROFESSIONALLY REMANUFACTURED,THE BEST ONES I HAVE EVER SEEN!"

"WOW BIG IMPROVEMENT IN ACCELERATION,FUEL ECONOMY AND STARTING!!! THANK YOU!!! A+"

"Fast shipping and correct description. My Jeep idles as smooth

as a babys bottom"

"fast ship, fixed my hot hard start.Jeep runs better as expected

& great price"

"worked even better than I expected. would buy again from this

seller. thank you"

"Never been so Happy too AWESOME thank you."

"super fast shipping!! Works better than described! Would buy

from again!!"

"i got a 4.5 avg mpg increase with the injectors plus 62mm

throttle body"

"Fantastic Ebayer!!!!! A++++ My Jeep has never run so smooth!!

Great injectors!!"

"Great service. My Jeep runs so much better and I picked up 5

mpg!"

"Instant improvement in acceleration, fuel economy, starting

and more. Thanks."

"received quick as adv. noticed definate power improvement in

my 99 jeep xj"

 

**THESE GENUINE BOSCH OEM FUEL INJECTORS  HAVE BEEN PROFESSIONALLY REMANUFACTURED AND TESTED TO MEET (OR EXCEED) ORIGINAL FACTORY SPECIFICATIONS**

 

TO ENSURE OPTIMUM,TROUBLE FREE PERFORMANCE,EACH INJECTOR HAS UNDERGONE THE FOLLOWING:

1)  VISUALLY INSPECTED FOR DAMAGE,DEFECTS ETC. WHICH MIGHT AFFECT PERFORMANCE

2)  TESTED FOR ELECTRICAL CONTINUITY AND PROPER IMPEDANCE. (12-14 OHMS,NOMINAL) THEY ARE THEN MOUNTED ON THE LAUNCH CNC602A TEST BENCH FOR PRELIMINARY FLOW TESTING AND SPRAY PATTERN EVALUATION.THE RESULTS OF THIS TEST ARE RECORDED FOR COMPARISON TO ASSESS THE PERFORMANCE AND EFFECTS OF THE ULTRASONIC CLEANING PROCESS.(4&5)

3)  AN EXTERNAL PRE- CLEANING IS PERFORMED TO REMOVE DIRT,GREASE AND GRIME DEPOSITS FROM THE INJECTOR EXTERIOR IN PREPARATION FOR THE ULTRASONIC CLEANING PROCESS.ALL O-RING SEALS,PINTLE CAPS AND INTERNAL  FILTER BASKETS ARE REMOVED AND DISCARDED.

4) AN INITIAL ULTRASONIC CLEANING IS PERFORMED TO DISLODGE ANY INTERNAL DEPOSITS. INJECTORS ARE REPEATEDLY CYCLED ON/OFF AND REVERSE FLUSHED DURING THIS PROCESS

5)  SECONDARY ULTRASONIC CLEANING AND REVERSE FLUSH USING CLEAN,FILTERED SOLUTION TO EXPELL ANY REMAINING DEPOSITS.

 NEW BASKET FILTERS ARE INSTALLED AT THIS TIME TO PREVENT ANY FOREIGN MATTER FROM ENTERING THE INJECTOR DURING THE REMAINDER OF THE TESTING/REMANUFACTURING PROCESS.

6)  INJECTORS ARE PRESSURE TESTED AT 0.33, 3.0 AND 7.0 BAR (5, 43.5 AND 100 PSI)  FOR LEAKS. THEN PULSED AT 3 BAR, VARIOUS DUTY CYCLES (UP TO 85%) FOR DYNAMIC FLOW TESTING.SPRAY PATTERNS ARE VISUALLY OBSERVED FOR ANOMALIES.ANY INJECTOR WITH ABNORMAL SPRAY PATTERN OR FLOW DEFICIENCY IS REMOVED.

7)  STATIC FLOW TESTING IS PERFORMED TO VERIFY EACH INJECTOR IS RESTORED TO MEET (OR EXCEED) ORIGINAL FACTORY SPECIFICATIONS.  FLOW VOLUME OF ALL 6 INJECTORS MEASURED SIMULTANEOUSLY SHALL FALL WITHIN <5% OF EACH OTHER. (AS TESTED ON LAUNCH CNC602A)

 INDIVIDUAL INJECTORS ARE THEN GROUPED INTO FLOW MATCHED SETS BASED ON THE RESULTS OF THIS FINAL TEST. **NOTE:ACTUAL MEASURED FLOW VARIANCE FOR THIS SET OF 6 INJECTORS WAS <2%  

8)  INJECTORS ARE RE-ASSEMBLED USING BRAND NEW COMPONENTS AND INTERNALLY LUBRICATED TO PREVENT DRYING OUT DURING PROLONGED STORAGE BEFORE BEING PACKAGED FOR SHIPMENT.

 

PAYMENT DETAILS:

PLEASE SUBMIT PAYMENT PROMPTLY UPON CLICKING BUY IT NOW.

ITEM WILL AUTOMATICALLY BE RELISTED IF PAYMENT IS NOT RECORDED WITHIN 24 HOURS OF PURCHASE.

 

**EACH ORDER IS PROCESSED THE SAME DAY PAYMENT IS RECEIVED AND SHIPPED ON THE FOLLOWING BUSINESS DAY VIA USPS PRIORITY MAIL.(2-3DAYS)** 

ORDERS PAID FOR PRIOR TO 12:00 NOON (PST)WILL SHIP THE SAME DAY

(EXCLUDING SUNDAY & HOLIDAYS)

1 YEAR UNLIMITED MILEAGE WARRANTY

RETURN POLICY:

EXCHANGE FOR NON-WORKING OR DEFECTIVE ITEM ONLY.PLEASE CONFIRM FITMENT FOR YOUR SPECIFIC VEHICLE PRIOR TO BIDDING.

IF ANY INJECTOR ARRIVES DEFECTIVE OR FAILS UNDER NORMAL SERVICE CONDITIONS WITHIN ONE YEAR OF PURCHASE I WILL GLADLY PROVIDE A REPLACEMENT FREE OF CHARGE.

(BUYER IS RESPONSIBLE FOR RETURN SHIPPING COSTS)

BUYER MUST CONTACT SELLER FOR RETURN AUTHORIZATION.

BUY WITH CONFIDENCE.

MY MAIN GOAL IS TO PROVIDE A QUALITY PRODUCT AND 100% CUSTOMER SATISFACTION.

PLEASE VIEW MY SELLER FEEDBACK AND FEEL FREE TO MESSAGE WITH ANY QUESTIONS OR CONCERNS YOU MIGHT HAVE.

 

IN SUPPORT OF OUR TROOPS,OPERATORS AND THEIR FAMILIES WORLDWIDE:

YOUR SACRIFICE IS RECOGNIZED

 

 

 

Jaguar F-Type V8 S vs Aston Martin V8 Vantage vs Porsche 911 Carrera S (video)

Thu, 20 Jun 2013

Chris Harris test the F-Type, V8 Vantage & 911 Carrera S. Which is best? If any car has grabbed the headlines in 2013, it’s the new Jaguar F-Type.

Fisker Karma drives Laguna Seca

Tue, 18 Aug 2009

The Fisker Karma out testing at Laguna Seca But unhappy as we are at Cars UK with the world’s obsession with all things green – and hybrid / electric cars in general – even we have to admit that some of the work that’s going on does impress us. The Tesla Roadster is a great achievement – if madly expensive for what it is (an electric Lotus) – and the work Koenigsegg are doing with the Quant is very exciting. But one company that is efficiently going about putting together a workable, high performance car is Fisker, who have been working on their electric saloon car – The Fisker Karma – for less than two years.

Jaguar Land Rover to build cars in China

Sun, 09 Sep 2012

Jaguar Land Rover has revealed it is going to build cars in China, starting with either the Freelander 2 or Evoque. Jaguar Land Rover has revealed that it going to build cars outside the UK for the first time (as opposed to re-assembling Freelander 2 CKD kits as it does in India) in a plant just north of Shanghai. As this is China, official permission from the Chinese government is required, but with the joint venture between Chery and JLR now official its seems unlikely to be a problem as JLR will already have agreed to Chery producing JLR cars with Chery badges on.