Find or Sell any Parts for Your Vehicle in USA
Performance & Racing Parts > Auto Performance Parts > Induction > Turbo Chargers

Genuine Garrett 57 Trim/ Stg I Blueprinted T3/t4 Chra on 2040-parts.com

US $379.99
Location:

Sanford, Florida, United States

Sanford, Florida, United States
Genuine Garrett 57 Trim/ STG I Blueprinted T3/T4 CHRA, US $379.99, image 1
“Brand new compressor wheel, backing plate, bearings, seals, hardware, heat shield, remanufactured bearing housing, turbine shaft”
Brand:Exclusive Turbosystems/ Garrett Surface Finish:Polished aluminum, as cast Manufacturer Part Number:TO4E-57/STG1 Warranty:Yes Placement on Vehicle:Left, Right, Front Country/Region of Manufacture:United States

Garrett TO4E 57 Trim/ Stage I Blueprinted CHRA (450 HP)

     Here we have a specially blueprinted CHRA for a 57-trim hybrid Garrett turbocharger.  Exclusive Turbosystems applies its proprietary tweaks to the turbine shaft, backing plate, bearings and thrust plate.  No component is left un-touched.  The STG I turbine shaft has polished journal surfaces for low friction contact with the bearings.  Both shaft support bearings have a full circumference oil groove to provide 360 degree lubrication of the turbine shaft journal surface.  Thrust plate receives modified oil ports for increased lubrication flow and cooling capacity.  It also has its surfaces polished for reduced friction and vastly improved thrust load capacity.  The combination of these modifications results in an impressive 35% reduction in internal friction and a corresponding drop in spool-up of the rotor group.  No other turbo manufacturer offers such a combination of improvements in CHRA bearing dynamics.  We also fully polish the backing plate surface adjacent to the compressor wheel exducer so that airflow has an ultra-smooth path into the housing chamber.  Even the turbine shaft oil seal is a specially selected staggered-gap design for reduced oil pollution of the gas flow and potential carbon build-up.  Not your average 57-trim CHRA here!  The turbine shaft, compressor wheel, backing plate, and housing are all GENUINE GARRETT parts.  Will only work in genuine garrett turbine and compressor housings.  Will spool up about 150 rpm sooner than a factory CHRA of the same specification and will yield a 5 HP gain as well.  Ported housings will improve these numbers further.  Feel free to ask us about providing this service as well. 

Features:

- Modified 270 degree thrust bearing

- Full circumference oil delivery journal bearings

- Polished backing plate compressor discharge surface

- TO4E 57-trim compressor wheel capable of 450 HP plus airflow delivery

- Fully balanced rotor group

- Staggered-gap turbine oil seal


Specifications:

- Compressor inducer diameter: 56.72mm

- Compressor exducer diameter: 74.84mm

- Turbine major diameter: 58.36mm

- Turbine exducer diameter: 48.57mm


We specialize in custom turbochargers, CHRA's, and portwork of all types.  Feel free to browse our full Exclusive Turbosystems site!

Building quality into every product we deliver the old-fashioned way, with hard work and expert skill.

We are located in Central Florida, where speed is serious, on the street and the track.

Chrysler future products: 2 cars coming from Fiat, minivan's future considered

Wed, 10 Aug 2011

The Chrysler and Lancia brands will be joined at the hip in the coming years. The two brands will sell similar versions of large, mid-sized and compact sedans and possibly a minivan. Chrysler will be sold predominantly in North America, the United Kingdom and Ireland; Lancia will be sold in continental Europe.

2014 FIAT Panda Cross goes on sale in the autumn priced from £15,945

Fri, 18 Jul 2014

The appealing little Fiat Panda Cross goes on sale in the autumn There really isn’t a lot of choice in the car market if you want a rugged little 4×4, and the only real choice is from Fiat. So it’s a good job the new Fiat Panda Cross is such an appealing little car. Based on the Panda 4×4, the Panda Cross gets some chunky bumpers so you know it means business, big tyres so you know it can actually do of-road stuff and uncreased ground clearance and underbody protection so you don’t wreck your new Panda Cross the first time it finds a small rock.

Saab to use BMW engines & chassis

Mon, 27 Sep 2010

Saab 9-2 Render (Concept by Fabio Ferrante) The rumours have been around for a few months that Saab were busy talking to BMW about supplying engines. And particularly about supplying engines for the Saab 9-2, Saab’s compact wish-list car. This morning Saab’s parent company, Spyker, has issued a press release confirming the talks and stating that they will release more information as soon as it’s available.

2040Parts.com © 2012-2025. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.051 s, 11984 u