Gm 6.5 Turbo Diesel Pmd And Fsd Cooler Heat Sink 6.5l on 2040-parts.com

FAST SHIPPING IN USA AND CANADA

This auction includes a used 34583 very good condition PMD a PMD Heat Sink (cooler) that comes brand new and complete (ready to be installed) and a brand new 6 foot harness. (See Pictures)

Custom PMD / FSD Heat Sink for all GM 6.5 Turbo Diesels with electronic fuel injection.

PMD is 100% 30 DAY GUARANTEED ANYWHERE IN USA AND CANADA.

(700$ TO THE DEALER or LESS THAN 200$ HERE)

This PMD is in very good condition TESTED on a 50,000$ BENCH and in fully WORKING condition.

The PMD is the small black box the size of a deck of playing cards on the side of your injection pump. It is a signal amplifier that powers the fuel solenoid on your injection pump. In stock location, it is prone to premature failure. It strongly suggest not re-installing it in the stock location. Mount to a remote cooler such as a FSD Heat-Sync.

 

WHAT'S INCLUDED? 1 x USED TESTED 34583 PMD, 1 X NEW COOLER with BOLTS, 1 x 6 FOOT HARNESS.

IS IT EASY TO INSTALL THIS HARNESS? Yes, a child could do it. Simply unplug your PMD from the original harness and plug in this harness. Next, relocate this harness to your new location and just plug in your new PMD. Should'nt take more than 10-15 minutes.

WHY SHOULD I USE A 6 FOOT HARNESS? We have done testing and found that if you locate your PMD anywhere inside the engine compartment it will run hotter than when it's installed on the fuel pump. (stock location) We also installed a PMD that was stalling under the hood and never stalled again when relocated inside the truck.

WHERE IS THE BEST LOCATION TO RELOCATE THE PMD? First, outside the engine compartment. As many of our customers does, they install it in the front bumper...on a blue cooler...bolted in the bumper or they relocate the pmd inside the truck, also on a blue cooler. With this 6 feet long cable, you can do it easily. (PLEASE SEE PICTURES BELOW)

________________________________________________________

PMD Heat Sync (cooler) Benefits:

 

- Locate your PMD / FSD away from the injector pump where heat is trapped

- Vertical mounting allows full air flow across the PMD / FSD and the heat sink and performs better during idle compared to horizontal mounting (other heat sink designs mount the PMD / FSD horizontally under the heat sink which can trap hot air, especially when idling)

- Attaches to the existing motor cover mounting holes (motor cover must be removed when mounting the heat sink to this location)

- Utilizes stock wire harness

- Precision design and fit, CNC machined from solid billet of 6061 Aluminum and Blue Anodized for corrosion resistance (will last longer than your engine!)

- Nylon Thermal isolation washers used to help insulate heat conduction to the heat sink from the intake manifold

- Reclaims fuel mileage and lost power

- Helps prevent hard-starting, stalling, hesitation and failure to start

- Protects injector pump from premature failure (costs can range from $700 for a rebuilt injector pump to $1500 for a new injector pump, not including installation)

- Compact and highly efficient and no modifications are needed to quickly mount a new or existing PMD / FSD (about 10 minutes when installing a new PMD)

 

 

What's included:

- (1) PMD (34583), HARNESS and FSD Heat Sink

- (2) M8 x 35mm bolts

- (2) M8 lock washers

- (2) M8 nylon washers

- (4) 6-32 x 1" screws (for PMD / FSD)

- (1) 6-32 x .25" screw (for grounding)

BID WITH CONFIDENCE

 

THE WINNERS AGREE: to pay shipping and handling as follows and please note that the S/H fees cover postage, packaging, labor and administrative costs, not just postage. S/H is non-refundable.

SHIPPING & TAXES: Canadians pays the HST on the whole amount including shipping. Quebec residents needs to pay the 9.5% PST on top of the 5% HST.
SHIPPING DELAYS: We always ship within 24 hours, every business days. So if you choose Express Post, you should expect 2-4 business days in USA and 2-4 business days in CANADA.
CANADA POST: All orders will be shipped via Canada Post services. That means we are able to ship to any P.O BOX. If you are located in the United States you will receive your items with United States Postal Services (USPS)

PayPal is the ONLY Payment Methods Available .

What's the Next Step?

1. You will receive a winning bidder notification via e-mail with checkout instructions.
2. As the winninng bidder, you must make payment or payment arrangements within 3 days of auction close; payment must be received within 7 days.
3. HST is applicable to all Canadian residents. Those from Quebec add 5% HST and 9.5% PST.

 Winning bidder must make payment arrangements within 3 days. If payment has not been received within 10 days of auction close, the item will be re-listed.

To file an RMA claim please click on the RMA icon below.

---

We all understand that the feedback is a critical part for all of us on eBay community. Therefore, if you are going to leave us a negative feedback do so after you get your facts straight or we will leave appropriate feedback on you. In many cases, negative feedback is the result of misunderstanding or miscommunication that CAN be resolved to our mutual understanding. So, please talk to us first before you leave negative feedback. We certainly can work around any problems that could occur. If we made a mistake we will correct it. We are NOT in the business of FRAUD.

So, if you are happy with our service please leave us positive feedback we will do the same for you automatically.