Purchase Gritty Triangle Boat Wrap - Customized for your boat in Naples, Florida, United States, for US $595.00

Condition:New Decal Type:Wrap Country/Region of Manufacture:United States

Sold in directional pairs, one left and one right side.
This wrap purchase is for a boat wrap to fit on a boat that is between 18 feet to 20 feet in length
From the rubrail down to the waterline.**
Longer boats may cost a little more. Smaller boat sizes are fine as well.

We will customize the wrap AFTER purchase to fit the actual year, make and model of your specific boat to show the most available image area to achieve the best visual display.

Our boat wraps can be fitted to accommodate most boat models.

Once ordered and paid for, you will NEED to provide the
year, make, model, length of your boat and a side shot picture
as well as very accurate dimensions.
SEE EXAMPLE OF HOW TO MEASURE BELOW
Please email us with details.
Once you have approved the layout, we will manufacture it and ship within 36-48 hours. All products made on site.

Wrap will have excess in the front and rear as well as the top and bottom to allow for appropriate amount of trim.
Set up to be trimmed at the nose and a few inches around the back toward the motor.

Your graphics color may vary slightly from what you see depending

on you monitor Setting.

(boat not included, ha!)
Material is 3M IJ180 cv3 cast boat wrap vinyl film with 3M 8518 cast overlaminate for maximum UV protection.
Shipping to the lower 48 U.S. only. No shipping to Hawaii and Alaska.

Boat wrap by Wrap Graphics

Please try to follow these instructions to ensure success.

1. Specify the color or design you prefer, such as “Green” or "Diver & Octopus".

2. Submit an image of the boat. Make it a nice side shot like this example.
Submit images and artwork to:

3. Take some dimensions of the boat hull. Be sure to include the length along the rubrail,
the max depth from the rubrail down to the waterline edge where the wrap will end,
then along the hull every 2 feet or so as shown in the diagram.
Take Boat dimensions like this
4. Your wrap print will ALWAYS have more length and width than the actual dimensions
you send for “wiggle room” and proper trimming.

5. Be sure to include the year, make and model of your boat.

6. We submit a final mockup layout for your written approval showing the wrap you
chose superimposed on the image of your boat hull.

Payment types: Visa, MasterCard, AmEx

Pay by Phone (239) 431-7356 Monday-Friday 8am to 5pm (e.s.t)
We can also process payments using paypal

7. Once we receive your approval the finished boat wrap is produced
and shipped within 36 to 48 hours.
YOUR WRAP WILL COME IN A RECTANGLE SHAPE AS SHOWN IN THE ABOVE
EXAMPLE. THIS ALLOWS FOR PLENTY OF TRIM AREA.

** 3b. If you want your boat wrap to go up over the rubrail into the gunwales, or if you want the bow or stern wrapped as well, you need to provide those dimensions as well. This will add to the cost. You can use the below diagram as a reference to ensure your wrap fits and presents itself the best.

We have many variations of our graphics and also provide custom colors upon request.
If you have any questions, Please don't hesitate to call.

Is Lamborghini’s ‘Super Sports Car’ a road-going Gallardo Super Trofeo?

Tue, 09 Aug 2011

Lamborghini teased a new ‘Super Sports Car’ for Frankfurt last week, and we mulled over the possibilities of what Lamborghini were going to reveal. But what we didn’t consider was a last-hurrah for the Gallardo in the form of the Lamborghini Gallardo Super Trofeo. We speculated that Lamborghini may be taking a production version of the Sesto Elemento to Frankfurt.

Porsche to produce Boxster S Black Edition

Wed, 02 Feb 2011

The new 2012 Porsche Boxster S Black Edition will be available this spring, the automaker said Wednesday. The Black Edition is powered by the same 3.4-liter six-cylinder engine found in the Boxster S. But the Black Edition produces 320 hp, 10 more than the Boxster S.

Mini at the London motor show 2008

Wed, 23 Jul 2008

By Guy Bird and CAR reader reporter Carcare Motor Shows 23 July 2008 22:14 Mini went ‘all intellectual’ on us with a university theme to its London stand on account of its Oxford connections. It also served up some quality crumpet (more of which later)… So what’s new on Mini’s London motor show stand?The ultimate Mini – the John Cooper Works version – went on sale on press day of the London motor show, offering 208bhp, 0-62mph in 6.5 seconds, a 148 mph top speed and a cool body kit. Click here for CAR's first drive of the JCW hot hatch.The £20,995 JCW hatch is the first of many planned JCW-badged Minis, with a Convertible version tipped for an unveil at the Detroit show in January 2009 and a Clubman JCW to follow in the same year with a similar price premium over existing models of about £1500.

Gritty Triangle Boat Wrap - Customized For Your Boat on 2040-parts.com

Decals for Sale

Is Lamborghini’s ‘Super Sports Car’ a road-going Gallardo Super Trofeo?

Porsche to produce Boxster S Black Edition

Mini at the London motor show 2008