Harley Davidson 2008 Electra Glide Switch Cover on 2040-parts.com

Ford Fiesta eWheelDrive gets wheel hub electric motors

The Ford Fiesta eWheelDrive – a driveable research vehicle built by Ford and German specialists Schaeffler – may be a regular supermini in size, but it points towards a potential future EV which is much more compact and very manoeuvrable. Ford has taken a regular Fiesta and dumped its powertrain, replacing it with a battery bank where the engine would be and fitted a pair of in-hub electric motors on the rear wheels. But the plan is to build new cars with the batteries under the floor which frees up the space under the bonnet which can then be all but removed to create a very compact urban car that still has space for four.

Where is Nissan and Infiniti design headed? Just look at the lamps

For a glimpse at future styling trends from Nissan Motor Co., look to the headlamps on the Nissan Leaf electric car and the sculpted rear of the Infiniti M. Front and rear lamps raised from the body surface and pronounced spoilers are two tricks Nissan will use more often to improve the aerodynamics and handling of vehicles--in addition to giving them a futuristic flair, global design chief Shiro Nakamura says. The goal: Win young drivers and bring sales of models such as the Nissan Altima in line with Japanese rivals "The important thing is the front end and the rear end," Nakamura said during an April 12 interview at the company's main design studio south of Tokyo.

New BMW M3 and M4 engine secrets laid bare

BMW's M division has lifted the veil of secrecy on the inline six-cylinder engine bound for its upcoming M3 sedan and new-to-the-range M4 coupe and convertible, revealing a potent twin-turbocharged 3.0-liter direct injection gasoline unit that produces an official 424 hp at 7,500 rpm and what officials describe as "significantly more than 369 lb-ft" of torque. The newly developed engine, known under the internal codename S55 B30, shares its 84.0 mm bore and 89.6 mm stroke with BMW's standard turbocharged 3.0-liter in-line six-cylinder direct-injection gasoline mill, the M55 used across the German car maker's lineup, endowing the aluminum block unit with an overall swept volume of 2,979 cc. This represents a sizeable 990 cc reduction on the engine BMW's M division's new unit replaces, the S65.