Find or Sell any Parts for Your Vehicle in USA

Harley Davidson Front Fork Tatto Dragon Decals Works On Alum / Chrome Ect... on 2040-parts.com

US $12.97
Location:

Niagara Falls, New York, US

Niagara Falls, New York, US
Returns Accepted:ReturnsNotAccepted Placement on Vehicle:Array Surface Finish:Non fadeing Laser waterslide Decal Laq Coated Warranty:Yes Country of Manufacture:United States

 

The dragon is a symbol of  Protection, Power & Strength,------------------------------------ 

 Chinese dragons traditionally symbolize potent and auspicious powers, particularly control over water, rainfall, hurricane, and floods. The dragon is also a symbol of  protection, power, strength, and good luck.

These are waterside decals that can be cleared over and be permanent. They will hold up under light washing, rain, ect... as they themself are lacquer coated, but to be permanent they need a light 3 or 4 coats of clear lacquer after they are installed on the forks. This can be done very easily without removing the forks from the bike.   

These water slide decals are on clear paper and will only work on light colors like alum,white ect
 Ill be more than happy to answer any questions you might have,
 I have done literally Hundreds of decal applications including clearing wet sanding and buffing.

Please Check my other listings for more designs.
 
ou will receive a right and a left side dragon decals I also include an extra right side for practice.
 
These decals will work in many applications please see directions below if you have any Questions Please hit me up here.
...Thank you very much for looking.

 

 

Waterslide  Decal  instructions.

 

1. Cut each decal out as close to the image as you can keeping a close uniform cut around the decal.(sometimes I do this for you : )

 

2. make sure the install area (forks) are clean with all wax and grease removed.

 

3. start with a practice decal (included) this will help you get it perfect.

 

4. soak the decal in shallow Luke warm water (in something like a tupper where)  for 30-60 seconds.

 

5. the decal is ready to be slid onto the fork when it slides off the white backing paper with your fingers.

 

6. keep the decal on the wet paper as it is very thin while holding the wet decal on the fork carefully slide it into place and gently position it using a wet sponge or wet paper towel.

 

7. don't over work this.. try to do the transferring and sliding all in one careful movement. once in place Don't mess with it !

 

8. use a wet paper towel to easily wipe off  wrinkles and remove any air bubbles ect.

 

9.let set up for at least 2 hours in the sun. or until completely dry before riding or clearing over.

 

10. when washing your bike gentle soap and water is no problem but the power washer will vaporize the decals if they are not cleared over.

 

if you are going to clear over the decals dont forget to mask off all the surrounding area on your forks  wheel, fender , Everything but the fork faces and decals.. dont forget to cover your bike from overspray.

 

Use clear lacquer or acrylic do not use enamels.

 

the decals need 5 to 8 LIGHT coats to seal the edges and be permanent letting each coat completely dry before adding another coat. Wetsanding & buffing after 8-10 coats is also possible for a permenent flawless show finish.

Sorry but I cannot be held responsible for installation mistakes.  so please use common sense when buying and applying these.
 
Please read the Instructions to completely understand what you are purchasing these are NOT stickers ! They are non fading waterslide Decals and must be cleared over to be permanent,
they will look like Custom hand painted graphics when cleared over.  
 
I have received many complements that's why I have made these available
.  

 

I send regular mail NO tracking # the day payment is made 2-4 days is when you will see the envolope in the mail I Guarantee  delivery.
 
Sorry No shipping outside the USA Thank you.. Ride safe

 

Wiedeking to be offered $140 million to quit Porsche, report says

Fri, 17 Jul 2009

Porsche CEO Wendelin Wiedeking could be offered a $141 million (100 million euros) payoff to quit the sports car maker to make way for a merger with Volkswagen, Germany's Sueddeutsche Zeitung newspaper reported Friday. The newspaper said Wiedeking has been visited by Porsche Chairman Wolfgang Porsche in the past few days, who “made it clear” that the embattled CEO should step down. Wiedeking has come under fire for allowing Porsche's holding company to amass debts of more than $12.7 billion (9 billion euros) during a failed attempt to take over VW.

2012 Porsche Boxster arrives in the UK. Price from £37,589

Sat, 05 May 2012

2012 Porsche Boxster - now in Porsche UK showrooms The 2012 Porsche Boxster – and Boxster S – arrive in Porsche UK showrooms today priced from £37,589. Porsche revealed the 2012 versions of the Boxster and Boxster S back in January looking, as you would expect from Porsche, much the same as the previous two generations of Boxster. Despite a familiar look the 2012 Boxster gets a comprehensive makeover with a sharper look thanks to shorter overhangs, a longer wheelbase and a wider track.

Design Review: Bertone Birusa concept

Tue, 04 Mar 2003

The new Birusa concept unveiled today shows Bertone returning to what they do best - a flamboyant showcar giving us a vision of how the high performance GT car (front engine, rear drive, two seats) could evolve stylistically in the near future. Based on a BMW Z8 aluminium chassis lengthened by 300mm, it's a refreshing piece of exuberance by the Italian company and a celebration of what they achieved in the 1960s and 70s. The wedge-shaped profile is characterised by a classic Bertone device - a dihedral-shaped side window with an undercut lower glass section, as featured on showcars such as the Boomerang and Carrabo.