Harley Panhead Shovelhead Velva Touch Hydraulic Lifters Tappets Blocks Pushrods on 2040-parts.com

Direct from the manufacturer BMO PRODUCTS

VELVA TOUCH HYDRAULIC LIFTERS

(This kit is for 53-65 Panheads and 66-84 Shovelheads using Evo grind camshafts)

This auction is for a New Black Velva Touch Hydraulic Lifter kit. This performance hydraulic lifter kit is designed to use an Evo grind cam in a 66-84 Shovel or 53-65 Panhead engine. It comes complete with all items as pictured plus complete instructions. It has a painted black surface finish that can be run as is or you can paint, powdercoat or chrome as you like. (Powdercoating services are available) Velva Touch lifters have been on the market for over 25 years and have proven to be the best available. You will have your choice of standard or stroker length pushrods,Stock Shovel oiling (using original external lines) or Evo oiling (oiling the top end up the pushrods as pictured) To use the Evo oiling option you must use rocker arms drilled to accept oiling up the pushrods.(Example:Jims,S&S or OEM Evo arms) Lifter blocks are made of cast iron for longevity. Pushrods are made of chromoly. See other auctions for additional kits available.

Running an Evo cam in a Shovel is basically a bolt in operation with this kit. You must check clearances for whatever cam you choose and match the gear pitch of the cam gear to the pinion and breather gear being used. It uses your stock pushrod tubes. Pushrods can be installed and removed with ease and without any other disassembly. Evo grind cams for 69 and down models are available from S&S,Leineweber,Woods and Black Widow Cams. Please research this subject if you are not familier with its numerous advantages and search our website for other models available. Please ask if you have any questions before bidding. Item will be assembled and shipped after you have chosen your options. I have for years and will continue to ship these kits all over the world. Contact me for a shipping quote. Additional pictures available upon request. Engines not included.

You have the choice of Standard or Stroker length pushrods and Shovel or Evo oiling both at no additional charge. If you would like to change the oiling option at a later date you would only need to purchase a 65.00 kit that includes new lower cups,snap rings,pushrod adjusters and nuts.

The Shovel/Evo cam kits are bolt in and are identical in appearance to the Shovel cam blocks. Nobody will be able to look at them and tell you are running an Evo cam. You can use your stock Shovel arms with an Evo cam but will loose some lift due to the rocker arm ratio difference between the Shovel and Evo. You can also run Evo rocker arms in your Shovel by using stepped spacers and get the specified lift listed for the Evo cam. Please contact me if you have any questions or need help determining what will work in your application.

Velva Touch hydraulic lifter kits include blocks that feed each tappet a steady supply of oil unlike stock and other manufacturers set ups where one tappet is fed oil and has to fill and pressurize then oil beeds over to fill and pressurize the next tappet. Our tappets have a lower pushrod seat to help straighten out pushrod angles, The pushrods are chro-moly and are offered non tapered or tapered (at additional cost) for more clearance, the kits also include quality hardware, gaskets and instructions. Velva Touch lifters are compatible with almost any camshaft available listed for solids or hydraulics.

Keywords: Flathead Knucklehead Panhead Shovelhead Evo Evolution Old School Chopper Bobber Bagger Vintage NOS OEM VTHUNDER U UL ULH E EL FL FLH FLHT FLT FLHT FX FXE FXR FXRS FXRT FXWG FXST FLST FLSTF FXSTS XL XLH XLCH XLX XR XR750 XR1000 K KH KHK Axtell Ness Harmon Kennedy Strociek Baisley Trock Bates AEE Delkron Merch Ultima Jims S&S Harley Davidson AIH BigDog Titan TP Panzer Zippers Red shift Andrews Comp Cams Leineweber Sifton Crane