He351ve Stand Alone Controller W/exhaust Break! on 2040-parts.com
Lakewood, Washington, US
!!!!Warning!!!! Heavy Duty Valve springs are required! Failure to install heavy duty valve springs while engaging the exhaust break can cause serious damage to your engine.
This controller is only for the HE351VE and requires no modification to the HE351VE actuator. (May work on other Holset turbos, attempt on your own risk.)
Banshee is a complete stand alone system, which is fully plug'n'play requiring no modification to the turbo! It will work on any engine gas, diesel, computer controlled or mechanical! The HE351VE compressor is huge! Smaller engines will still have lag times!
The controller is industrial grade IP67 rated, this isn't some RadioShack piece of junk! The sensor is a Honeywell 50PSI sensor; the sensor will work up to 100 PSI after that the pressure can damage the sensor, burst pressure is around 300PSI.
Works on 12, 24, & 36VDC, (However I don't know what the HE351VE actuator runs on except 12V)
Safety Features
- Internal surge protection up to 60 VDC
- Reverse polarity protection
Warranty
DOA - notify me immediately, (easy test connect the wiring harness to the turbo, connect both positives and negative wires to the battery and slowly rotate the potentiometer, you will hear the actuator move.)
Controller – 6 month warranty unless physically damaged or opened
Sensor – 6 Month warranty unless physically damaged
Wiring Harness – 30 Day warranty unless modified. (I can supply replacement connectors, pins/sockets or all the pieces required to build the harness yourself as a DIY kit)
I will work with everyone to ensure they get the best product possible! Even if it’s outside of the warranty.
Controlling the turbo is easy you have a on/on toggle switch, this switch toggles between the sensor preset positions and the manual control via potentiometer. The Potentiometer allows you to fully open/close the vanes. With the vanes fully closed, enables the exhaust break, if you open the vanes up it will lower boost for better MPG. Manual control is also good to help clean the vanes
Potentiometer will manually move from 3CM to 25CM, sensor will move the vane to the next position once set PSI has been reached.
Current positions
3CM - Exhaust Break
9CM - 21PSI
12CM - 30PSI
15CM - 38 PSI
18CM - 44 PSI
25CM - Potentiometer control (full open to assist in cleaning vanes)
No end user programmability, however custom programming is available. If you wish to change the programming latter on, you would need to send me the controller for reprogramming.
Videos of the controller in my 2002 Toyota Tacoma 4BT
https://www.youtube.com/watch?v=I9dh3m1AHZo
https://www.youtube.com/watch?v=KiU1pOLFV0E
http://www.youtube.com/watch?v=iAD3HIqTkl8
Give me a call 253-380-0055 if you have any questions. 9am to 8pm PST.
Turbo Chargers & Parts for Sale
- Blue 3.5" 90 degree turbo silicone elbow pipe hose reducer corolla camry 4runner(US $12.90)
- Universal manual adjustable turbo boost controller blue acura audi bmw cadillac(US $15.99)
- Ford 7.3l powerstroke turbo garrett turbo f-250 f-350 f-450 works great!(US $82.00)
- 44mm bov blow off bypass valve turbo + mild steel weld flange blue (US $43.99)
- 2.5"type h/rfl bov xs weld on flange adapter intercooler stainless steel pipe (US $16.99)
- Mazda rx7 fd3s 1992-2002 blitz turbo timer harness-mz02- (US $25.00)
McLaren P1: Middle East demand outstrips supply & new P1 photos
Wed, 17 Apr 2013So the opening of McLaren Manama – a joint venture between McLaren Automotive, Mumtalakat, and Al Ghassan Motors - at the Bahrain World Trade Centre is an opportunity to get the P1 front and centre as McLaren promotes both the new showroom and the upcoming 2013 Bahrain Grand Prix. But it won’t just be the P1 in McLaren’s new Bahrain showroom, it will also be the getting the Formula One gloss too with the MP4-25 – Jenson Button’s car in his 2010 season with McLaren – going on display to garner footfall in the new showroom. To give us a reason to report on the new showroom in Bahrain, McLaren has released more images from the photo shoot earlier this year at the Bahrain International Circuit when they were busy drumming up interest in the P1, and they’re such beautifully lit and shot images we couldn’t not publish them.
Spyker B6 Venator Spyder Concept at Pebble Beach 2013
Tue, 27 Aug 2013You might know Spyker for trying to rescue Saab a few years back, but the independent Dutch brand actually has a history stretching back well before the now defunct Swedish brand started. Spyker was born in 1880 as a carriage builder and repairer and built its first car in 1898. Its latest is the 2013 B6 Venator Spyder Concept unveiled at the Pebble Beach Concours.
Lexus GS-F to get LF-A V10
Wed, 30 Dec 2009Lexus are said to be preparing a GS-F with the V10 from the LF-A (pictured) There have been rumours that Lexus are going to produce a range-topping GS-F for some time. But with car makers looking at downsizing and trying their best to stick smaller and more economical engines in its cars it seemed the possibility of an M5 competing Lexus GS were going nowhere soon. But according to Japan’s Best Car magazine that couldn’t be further from the truth.