Hho Exstreme( M) Maximus 21 Plate Set 12/24v 70a 30khz Ccpwm Gas Dryer + Koh on 2040-parts.com

(LIMITED TIME ONLY)

You are Buying the latest MAXIMUS EXSTREME 21   This is a 21 Plate HHO Version 13 dry Cell kit.

The MAXIMUS EXSTREME  21 Version 13  Series is our latest cell design, Push in quick release 90 degree brass swivel fittings makes this unit a breeze to fit and you can add more cells quickly without fuss. Quick release metal fittings all the way from cell to engine. With bigger outlets and bigger bubbler. Included is the latest CCPM 70 amp capable 30 KHz and 12 or 24 volt Also included is the latest COMBO GAS DRYER .

Enough HHO for up to a 4 litre diesel or petrol engine and is able to have more cells added where needed.

Comes with bonus electrolyte and HHO Foam Stopper.

 

INCLUDES

MAXIMUS 21  Plate Dry Cell

New CCPWM 70Amp Intelligent PWM

1800 x 6mm 30 amp Red & Black paired wire

2400 PE tube to fit quick release fittings

 Self Tapping Mount Screws

1X  30 AMP Gauge

Purpose built HHO 2.7 litre Bubbler tank

1 poly spun gas dryer.

1 X Sinted electrolyte trap with manual drain

1 X 1/4 Check valve

1 X 30amp waterproof fuse

1 X 60 AMP RELAY

All electrical tabs and fittings needed

                                                                                                                                                                         BONUS

KOH Potassium Hydroxide ( sufficent to make 4 litres).

HHO ANTI FOAM Foam stopper

 

FOR MORE INFO CALL 0740972713

 

At last an Intelligent Current Controller!

(1) Changing Amps directly, not changing the duty cycle.

(2) Fix a value of output current and Pro'X will make your

cell working at this value or lower. Don't need to worry

about over drawing power from battery and alternator. It

protects your batter y and alternator in an other worlds.

(3) Pro'X can work in both 12V and 24V by a small easy

switch inside the case. Don't need to change the cooling fans.

(4) Max Output 75AMPs, 30KHz

(5) Different Frequency ranges selecting for more different

purpose operations.

(6) Auto Save. The Frequency and Duty Cycle can be auto saved. When the data

achieves your need, stop tuning for 1 second. The data can be auto

saved.

(7) Memory After the Duty Cycle and the Frequency was saved, Pro'X runs at this recorded data next time when it is powered on.

(8) Safety wires for different type of sensor switches.

(9) Dual in Dual out wires, easy connection.

(10) Size 19.5x16.1x7.5cm

(11) Net Weight: 0.95kg

 

Vehicles that require EFIEs will find a link in the install instruction that will lead to best units on the market.

For information call 0740972713

 POSTAGE WILL BE IN TWO PACKAGES AS THIS SET IS VERY COMPREHENSIVE.                 2 TRACKING NUMBERRS WILL BE SUPPLIED

 

 

 

 At peak efficiency you can expect this cell to produce suffient HHO at around 10 to 14 amps at 13.2 volts to give sustantial benefit to up to a 4000cc (4litre) engine.

. These HHO dry cells, and for that matter any Hydrogen on demand system added to a vehicle with a stock alternator, run at peak performance at under 18 amps. This is because at over 18 amps the alternator must work harder which in turn causes the engine to work harder, which uses more gas.

If more HHO is needed, it is better to add more cells than increase the amperage, as this can often boil the cell which will produce steam and give a false indication of HHO output. The MAXIMUS 21 with its push in brass fittings makes adding additional cells a breeze!

 

 

FAQ"S

IF the question is not answered below please when requsting information give size of engine in cc. age, make and if diesel or petrol. 

What are your cells made of?

We use only 316L 18 gauge Stainless Steel in all our HHO Generators. The Plates Used in Our Dry Cells Are All Laser Cut, this does have an effect on performance and production of hho gas!!

The Acrylic end caps are 100mmX100mm X12mm thick rated at 145 degrees C. The 2 hose barbs are 3/8" The attachment bracket angles are aluminium 2 X 6mm wing nuts for easy connection to the power source

 

What size cell do I need.?

An 11 plate cell will do a 2500 cc engine with ease. For larger V6 V8 a 21 plate cell or two 11 plate cells together. 

 

Can I run my car totally on HHO ? No HHO is added to your engine and acts as a catalyst to ensure that a greater amount of fuel is burnt rather than thrown out the exhaust or wasted in generating heat and vibration. This in turn increases performance by smoothing out and improving overall operation. Almost immediately you will notice a significant reduction in engine noise, as a more complete combustion helps the engine to cycle correctly, this results in noticeable power increase. Over the next month or so the engine will remove built up carbon deposits from unburnt fuel, further increasing your performance & mileage and reducing your emissions. Fuel savings will depend greatly on the current inefficiency of your cars engine. Some older vehicles can get around 30 to 40% savings

 

 

Does it make a difference if it is a Petrol or Diesel Engine?

HHO will work on both Diesel and Petrol engines . Customers with engines with intercoolers must do regular maintenance to clean out of the gas scrubber                                                

Is a HHO dry cell system hard to install?

All our dry cells and kits have complete detailed installation instructions delivered with them. On average with the right tools and some mechanical know how it should not take longer than a few of hours,

What is an EFIE ? and do I need one?  .

Yes I do if my vehicle is fuel injected and has Emission sensors!

No I do not if my vehicle is pre computer

Fuel injected vehicles use a computer and sensors to maintain the correct air/fuel ratio. The main sensor is the oxygen sensor. Fuel injected vehicles have one or more oxygen sensors installed in the exhaust stream.  The computer takes the information from the sensors and adjust the fuel flow accordingly. Because HHO causes the fuel to burns more efficiently. We must make an adjustment and so we install the  Electronic Fuel Injection Enhancer (EFIE)
The Effie tells the emissions computer that all is well. and this allows the engine run at peak.

 Which EFIE do I need?

 If your engine is pre computer you need not use an EFIE.

A Digital EFIE or a Wideband EFIE.  Then we have a dual and quad version of each, and that just corresponds to the number of sensors that you have.  Usually V6 and V8 engines need the quad version and 4 cylinder engines use the dual versions.

See below for more info on EFIE’s

Do I need a PWM ( Pulse width modulator)?

The pulse width modulator (PWM) has an onboard trim potentiometer to control the amount of RMS voltage and current to your hydrogen booster.
Your HHO Generator will run cooler and make more hydrogen which has greater ability to increase fuel mileage.

 

Is a HHO dry cell system hard  to install?
 It is very simple, All our dry cells and kits have complete detailed installation instructions delivered with them. On average with the right tools and some mechanical know how it should not take longer than a few of hours,

What Maintenance do I do on my Hydrogen on Demand system?
Make sure that the engine is off and the Generator is cool before servicing. For extra safety, also remove the fuse to the battery connection before servicing. At the same time you will want to check all the hoses and electrical on your complete Hydrogen on Demand system for good connections.
   Check the water level about every gas fill up, keep it about 1"- 1 1/2" from the lid.

 

 

These "HHO Generators", will produce Hydrogen and Oxygen.

Hydrogen is a volatile colourless gas that has a low temperature ignition point. This gas also has no smell. Serious injuries and bodily harm can occur if the device is not handled or used properly! NQ Hybrids takes no responsibility in damage to mechanical or bodily injury!

Please, Safety First when dealing with any hydrogen generators.

 This cell should not be operated without a bubbler or flash back device!

 

SUGGESTED ELECTROLITE

Now the installation of your unit should be complete. You are now going to Mix the Catalyst (electrolyte) with Distilled Water. KOH is recommended.                               Potassium hydroxide is an inorganic compound with the formula KOH. Its common name is caustic potash.                                                                                    Potassium Hydroxide is the best electrolyte for a Hydrogen Generator. We wont use any thing else for catalyst in our HHO Dry cells                                                                                       
The strength of your electrolyte mixture is what controls the amps drawn by your dry cell. To keep my unit running at 18 Amps or less and get a least 1 liter per minute of gas or more)
 Start with 100gms of KOH to 900 gms of  distilled water for start up , you may need to add more  to get higher amps but run your unit with a weak solution to condition it first.
** Use "Safety First" rules when mixing KOH or other caustic materials. Mix thoroughly in a separate container.
* Once this has been mixed add to the reservoir, you should be able to see the water flowing into the dry cell. Bring the level up to the 3/4 mark on the reservoir and make sure to put the cap back on.
*** Now you HHO Dry Cell System should be fully functioning and ready for a test drive. Before you take a test drive start the vehicle, you should now see the water in full circulation. Double check for air and water leaks at this time,use spray bottle and a teaspoon of dish soap once mixed spray on all of your hose connectors, bubbler cap and reservoir cap, if there are bubbles you have a leak and this needs to be fixed.

OTHER OPTIONS FOR ELECTROLYTE is to use Laboratory grade Sodium Carbonate or Sodium Hydroxide as an electrolyte because they give equal results and keep the solution cleaner. It must be Laboratory grade as there are no contaminants in Lab grade chemicals.                      

Recommended mixes. Sodium Carbonate 99.5%pure.I use 20 gram/litre of distilled or demineralized water. Sodium Hydroxide 97%pure, at 10 gram/litre of distilled or demineralized water.

 

Always read MSDS data sheets when using corrosive / caustic solutions

Disclaimer In no event will we be liable for any loss or damage to any vehicle or person including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from the use of our products. NQ Hybrids recommends a competent person installs there units.

FOR MORE INFORMATION EMAIL THROUGH EBAY OR RING 0740972713

DISPATCH  / TRACKING   / INSURANCE / FEEDBACK

DISPATCH   In most cases, we dispatch order within 2 business days (weekends and public holidays are not cognized as business days) after full payment is received and cleared. TRACKING . Posting within Australia: We post via Australia Post. Generally, it takes 1-9 days to deliver parcel within Australia. (Please Note: No tracking number will be provided via regular post. only on satchel items.) . International: In most cases, international shipping takes around 12 -35 business days. If you do not receive your item on time, please contact us immediately for further assistance.  Some countries do not offer the availability of  tracking  at all,  Basic sea mail and air freight also have no tracking. Tracking can't be offered in these circumstances, if you want tracking select express shipping (Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost.) INSURANCE  5. We are not responsible for the loss and/or damage during delivery. Registration and insurance are available upon request. No responsibility accepted for uninsured items or for handling by postal services

Please contact us for quote, as a rule of thumb approx 5% of the value of the item.

FEEDBACK  will be left once payment has been received So please leave me feedback as soon as the item reaches you safe and sound. If you have any issue contact us immediately

SEE MORE ITEMS ="http://stores.ebay.com.au/NQ-HYBRIDS_EFIE-S-PWMS_W0QQfsubZ1964902015">EFIE"S  &  PWMS

Powered by eBay Turbo Lister