Find or Sell any Parts for Your Vehicle in USA
Car & Truck Parts > Air Intake & Fuel Delivery > Other

Hho Titanium Dry Cell Generator Up To 7.3l Engine Volume Kit For Trucks on 2040-parts.com

US $800.00
Location:

Sofia, BG

Sofia, BG
HHO Titanium Dry Cell Generator Up To 7.3l Engine Volume Kit For Trucks, US $800.00, image 1 HHO Titanium Dry Cell Generator Up To 7.3l Engine Volume Kit For Trucks, US $800.00, image 2 HHO Titanium Dry Cell Generator Up To 7.3l Engine Volume Kit For Trucks, US $800.00, image 3 HHO Titanium Dry Cell Generator Up To 7.3l Engine Volume Kit For Trucks, US $800.00, image 4
Returns Accepted:ReturnsNotAccepted Brand:HAD Manufacturer Part Number:X4 Placement on Vehicle:Array Surface Finish:Titanium Warranty:Yes Country of Manufacture:United States


LESS TIME AT THE PUMPS ,MORE MONEY IN YOUR POCKET 
SAVE UP TO 40% ON FUEL!!!


THIS UNIT COMES WITH A HIGH FLOW COOLING SYSTEM FOR MAXIMUM PRODUCT PERFORMANCE

8 PLATE, 7 CELL GENERATOR DESIGNED WITH 4 HIGH SURFACE COATED, AND 4 TITANIUM PLATES


We recommend this unit for the following engines:


8 cylinder and 10 cylinder gasoline and up to 7.3 liter diesel engines




Our complete HHO kits include much more than just the best titanium generator. In addition to providing all the materials you need, we've added cooling systems to every kit we sell. Wherever there is power generating, heat is building up. By including a radiator, the system maintains a constant temperature allowing for more efficient operation. Our competitors cannot utilize a cooling system due to the fact that they use a Caustic Electrolyte. If they can't run their solution through an aluminum radiator, how can they tell you their system is safe for your engine that is mainly comprised of aluminum parts?


HHO Dry Cell Technology with Titanium

  With so many companies claiming to have the best HHO dry cell technology, how can you make the distinction between a bad unit, a good unit, and a great unit? We have reviewed many designs from some of the top companies in the country and they all have the same basic design flaw... the core design is stainless steel plates. We recognize that in the beginning this was the best known metal available to the common builder. In the race to build a more productive unit, the industry has followed a path towards more plates per cell in an effort to better an already flawed design. This has created thousands of "backyard engineers" attempting to make a better wheel. Unfortunately, all this has created is an industry that more resembles a science fair than an alternative to increasing fuel prices and decreasing dependency on foreign oil.   The staff at ThePIT dedicates its resources towards developing a product that stands out from everyone else in the world. We are the only company to offer a complete product line that is comprised of high surface coated plates on a pure titanium substrate. This revolutionary titanium HHO dry cell plate design requires fewer plates than a comparable stainless steel cell. These plates are unique in many ways. First, they create zero corrosion. No rust entering your engine, EVER! No dirty water means no constant maintenance or product tear down. Spend less time monitoring the device, and more time saving money at the pumps! The coating offers a surface area that is over 20 times that of stainless steel. Less metal equates to a design that is smaller and easier to install in the limited space available in modern engine compartments. Our unique dry cell technology requires far less refilling than most other systems on the market. And size does matter, especially when trying to install a unit in any late model vehicle. We took this into consideration when designing our HHO dry cell. Our smallest unit measures approximately 6" long x 3" wide x 2" deep, weighing a mere 1 pound 5 ounces; our larger unit measures approximately 9 3/4" long x 5" wide x 3 1/2" deep, weighing only 3 pounds 9 ounces.


Benefits of Titanium Dry Cells:

  • Clean water. No rust, sludge or slim in dry cells or engine - ever!. No dry cell maintenance. When the water remains clear, no flushing or disassembly is ever required.
  • 20 times more dry cell plate surface area per square inch.More surface area = fewer plates = smaller unit = lighter and easier to install
  • We use sodium sulfate. No KOH or NOAH. Sodium and potassium hydroxides have long term harmful effects on your engine as well as to humans upon contact. 
  • Coated titanium costs 2200% more than stainless steel. You've heard the old adage 'you get what you pay for. Even still, our dry cell units are competitively priced against other companies using stainless steel. 
  • Our products produce the purest form of oxyhydrogen available with any cell dry cell design. With NO byproduct gases being formed — this includes chromium, nickel, and iron which is produced by stainless steel dry cell — far less gas is required to gain results.
  • Lower oxyhydrogen levels means less oxygen passing the O2 sensor. This is the main reason most cars will improve gas mileage using this system.

    We strongly recommend adding a Volo chip for gasoline engines.Your car's make model and year of manufacturing will be needed!

    The VOLO FS2-HHO chip has been specifically tuned for the needs of HHO generator equipped vehicles. The FS2 is dynamic - which means the FS2 will consider oxygen levels in the exhaust, along with engine speed and load, intake air temperature and volume, and many other variables to determine the most efficient fuel delivery rate and timing at up to 256 separate load points.

    When using HHO as a fuel supplement, the FS2 will adjust fuel delivery and timing to optimize efficiency.

    When HHO is disabled, the FS2 will automatically re-adjust and switch to highly efficient, non-HHO enhanced maps.

    The FS2 is a vehicle specific, custom programmed 20MHz Microcontroller. It utilizes its high speed serial input/output to communicate directly with the ECU through the OBD-II port.

    Recommended modifications :

    - K&N or equivalent non-restrictive intake

    - HHO (Oxyhydrogen) Supplement Generator for maximum gains.


    The FS2 is compatible with factory equipped Turbo/Superchargers, diesel engines, Flex-Fuel, & HHO supplement systems.

    It is NOT compatible with hybrid engine options, propane, or natural-gas.


    Is this the right one for my engine?

    The FS2 has room for up to 8 performance maps, which we use to cover different engine options for a particular vehicle. For example, the 1999 Ford Mustang Volo Chip will be compatible with both the 3.8L V6 and the 4.6L V8. The FS2 will read the first few bytes of data from your ECU during calibration to determine which map to use.



    • There is no other company on the HHO market that can offer you a kit for trucks ,that will really work!
    Here comes the difference between the stainless steel and the titanium cathodes.



    PRODUCT PURCHASE INCLUDES THE FOLLOWING:


    • (1) X4 Hydrogen Cell w/ Y Connectors
    • (1) 4 QT Polyethylene Tank
    • (1) Set of Water Tank Fittings & Plugs
    • (1) 2 1/4" Unvented Cap

    • (1) Bubbler
    • (2) 15 cc's Water Conditioning Solution
    • (2) 16 oz Sodium Sulfate w/ MSDS Sheet
    • (1) 15' Length of 3/8" ID Black Automotive Grade Rubber Hose
    • (1) Lighted Automotive Toggle Switch
    • (1) 75 Amp Relay

    • (1) Ammeter
    • (1) 12V/24V 85 Amp Constant Current Solenoid
    • (1) 8 Gauge 25' Premium Electrical Automotive Wire (Positive)
    • (1) 8 Gauge 8' Premium Electrical Automotive Wire (Negative)
    • (1) 16 Gauge 15' Premium Electrical Automotive Wire (Positive)
    • (1) 16 Gauge 5' Premium Electrical Automotive Wire (Negative)
    • (9) Ring Terminals
    • (9) Female Blade Terminals
    • (10) Black Zip Ties
    • (8) 11 - 20mm Stainless Steel Hose Clamps
    • (1) 1/4” Npt 3/8" 90 degree Barbed Nylon Fitting
    • (1) Fuse Tap Kit
    • (1) Set of Aluminum Mounting Brackets
    • (1) Hardware Kit (20 flat washers, 9 self tap screws, 4 lock nuts)   

    Mini wins 'Car of the Year' award

    Wed, 16 Jul 2014

    THE BRITS finally enjoyed some success this summer as the latest Mini was named Auto Express magazine's Car of the Year 2014 at a lavish ceremony in London’s West End. This third-generation version of the Mini is built in Oxford, with engines made in Hams Hall near Birmingham and body panels coming from Swindon. As well as winning the overall Car of the Year Award, the Mini was also named Best Premium Small Car.

    News watch Jan 2011: today's auto industry news

    Fri, 28 Jan 2011

    Welcome to CAR Magazine's news aggregator as we round up the daily stories in the auto industry. Top tip: news summaries are added from the top hour-by-hourFriday 28 January 2011• Mazda has signed a deal to supply Nissan with its 5/Premacy MPV from May 2011. Nissan will sell a 'cleary differentiated' version of the people carrier in Japan (Mazda) • VW has begun construction of a new engine plant in Silao, Mexico.

    Infiniti Emerg-e at 2012 Geneva motor show

    Mon, 05 Mar 2012

    Infiniti is ramping up the interest factor with the new Emerg-e hybrid sports car concept at the 2012 Geneva motor show. Imagine an Alfa Romeo 4C pepped up with a range-extender powertrain and you're not far from the truth. The Infiniti Emerg-e is a stunning little coupe, which draws on the 2009 Infiniti Essence supercar for inspiration.

    2040Parts.com © 2012-2025. All Rights Reserved.

    Designated trademarks and brands are the property of their respective owners.

    Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

    0.046 s, 11982 u