Holley, Qft 850 Hp Double Pumper, Red Billet Metering Blocks, Street, Strip on 2040-parts.com
Jeannette, Pennsylvania, US
Here we have an all BRAND NEW HP style, QFT 850 squarebore, 4 barrel, double pumper (mechanical secondary) carburetor professionally set up for street and strip use. This is one of my custom builds consisting of a new Quick Fuel Technology aluminum, contoured, HP style main body for maximum flow and enhanced booster signal. It will flow 850 cfm and is dyno-proven to 600+ horsepower. This is NOT the cheap Chinese knock-off junk sold under the brand name "Pro Comp". These parts are machined in Bowling Green, Kentucky and are first quality. Please call the number below with any questions or concerns regarding your application. I can set this carburetor up to work best with your combo. I usually have two or more in stock, just email or call the number below for availability.
It has been assembled with high-flow .110" needle & seat assemblies, 30cc pumps, #31 squirters with pink #330 racing pump cams, blue non-stick bowl and block gaskets, nylon bowl screw gaskets, and vent baffle. The jetting is 74 up front with a 6.5" Hg high-flow power valve, and 84 in the rear with the power valve circuit blocked. The mounting gaskets are included as shown.
Here's a list of features;
New QFT polished lightweight aluminum main body with screw-in air bleeds. .070" idle and .030" high speed bleeds installed.
New red anodized billet aluminum metering blocks that are custom calibrated for maximum performance.
4 corner idle for fine tuning your idle circuit.
New heavy duty cast aluminum baseplate that is much stronger than a stock Holley piece.
New teflon coated throttle shafts, stainless steel throttle blades, and loctited button-head screws for increased flow due to decreased turbulence.
New lightweight aluminum racing style fuel bowls with sight windows that will not yellow. No more fumbling with sight plugs!
Red anodized inlet fittings. Uses a standard Holley model 4150, inverted flare fuel line with 5/8"-18 flare nut.
This carburetor weighs just over 7-1/2 lbs., while a typical cast zinc carb weighs in at 11 to 13 lbs.
Please email or call me at my shop with any questions, as I will be glad to help you with your setup. I can be reached at 724-523-2947 from 9 am 'til 7 pm, eastern standard time for tech or service help.
I welcome all potential bidders to check my feedback. My feedback from carburetor and parts sales is 100%, and I've sold hundreds in the past few years. I am the owner/operator of a one-man shop and my carbs are built with pride one at a time. Please see my other auctions for more great deals.
Thanks, Steve
Carburetors for Sale
1967-1977 rochester carburetor 4 bbl 400 455 428 389,ram-air firebird 2+2,gto,ta(US $400.00)
Rochester quadrajet carb.1971 to 1973 chevy cars & trucks(US $199.00)
Edelbrock 1901 quadrajet carb.1966 to 1973 chevy cars & trucks(US $299.95)
Nos holley 2-226 2bbl carburetor 1970 1971 1972 buick full size skylark cars 350(US $39.95)
Stromberg 97 carburetors 9510a(US $220.00)
Proform 67200 750 cfm hp race series carburetor(US $511.83)
Ford burns through $5.5 billion in 4th quarter as losses mount
Thu, 29 Jan 2009Ford Motor Co., the only U.S. automaker operating without federal loans, burned through $5.5 billion in cash during the final three months of 2008 as losses mounted. Ford finished the year with cash reserves of $13.4 billion.
Automotive Press Association Design Panel says autonomous cars will tear up design rulebook [w/Video]
Tue, 18 Jun 2013Fully autonomous cars will challenge everything we know about car design to date, according to industry experts at the Michelin Challenge Design-hosted Automotive Press Association (APA) Design Panel. The APA members-only event, held at the Detroit Athletic Club, carried the theme of 'Driven/Undriven: The Duality of Tomorrow's Automobile' – the subject of this year's Michelin Challenge Design – and explored the design challenges and opportunities that will arise with the advent of autonomous vehicles. The APA Design Panel consisted of Jim Hall of 2953 Analytics, Chris Borroni-Bird, vice president of Strategic Development at Qualcomm and author of Reinventing the Automobile: Personal Urban Mobility of the 21st Century as well as Stewart Reed, chair of the Transportation Design course at the Art Center College of Design in Pasadena, California.
Morgan's eco car
Thu, 15 Mar 2007By Ben Barry First Official Pictures 15 March 2007 05:05 Morgan Life Car: the lowdown Morgan, that most traditional of British brands, has announced it will launch a zero-emissions car called the Life Car at next year’s Geneva show. Based on the regular Aero chassis, the Life Car is part DTI-funded and involves partnerships with Oxford University and a company that developed fuel-cell technology for military applications – such as providing medical teams with power during conflicts. The Life Car is predicted to weigh 600kg, have a small fuel cell delivering 33bhp and, erm, no brakes.