Holley, Qft 850 Hp Double Pumper, Red Billet Metering Blocks, Street, Strip on 2040-parts.com
Jeannette, Pennsylvania, US
Here we have an all BRAND NEW HP style, QFT 850 squarebore, 4 barrel, double pumper (mechanical secondary) carburetor professionally set up for street and strip use. This is one of my custom builds consisting of a new Quick Fuel Technology aluminum, contoured, HP style main body for maximum flow and enhanced booster signal. It will flow 850 cfm and is dyno-proven to 600+ horsepower. This is NOT the cheap Chinese knock-off junk sold under the brand name "Pro Comp". These parts are machined in Bowling Green, Kentucky and are first quality. Please call the number below with any questions or concerns regarding your application. I can set this carburetor up to work best with your combo. I usually have two or more in stock, just email or call the number below for availability.
It has been assembled with high-flow .110" needle & seat assemblies, 30cc pumps, #31 squirters with pink #330 racing pump cams, blue non-stick bowl and block gaskets, nylon bowl screw gaskets, and vent baffle. The jetting is 74 up front with a 6.5" Hg high-flow power valve, and 84 in the rear with the power valve circuit blocked. The mounting gaskets are included as shown.
Here's a list of features;
New QFT polished lightweight aluminum main body with screw-in air bleeds. .070" idle and .030" high speed bleeds installed.
New red anodized billet aluminum metering blocks that are custom calibrated for maximum performance.
4 corner idle for fine tuning your idle circuit.
New heavy duty cast aluminum baseplate that is much stronger than a stock Holley piece.
New teflon coated throttle shafts, stainless steel throttle blades, and loctited button-head screws for increased flow due to decreased turbulence.
New lightweight aluminum racing style fuel bowls with sight windows that will not yellow. No more fumbling with sight plugs!
Red anodized inlet fittings. Uses a standard Holley model 4150, inverted flare fuel line with 5/8"-18 flare nut.
This carburetor weighs just over 7-1/2 lbs., while a typical cast zinc carb weighs in at 11 to 13 lbs.
Please email or call me at my shop with any questions, as I will be glad to help you with your setup. I can be reached at 724-523-2947 from 9 am 'til 7 pm, eastern standard time for tech or service help.
I welcome all potential bidders to check my feedback. My feedback from carburetor and parts sales is 100%, and I've sold hundreds in the past few years. I am the owner/operator of a one-man shop and my carbs are built with pride one at a time. Please see my other auctions for more great deals.
Thanks, Steve
Carburetors for Sale
Holley (qft), 1050 hp, 4150 double pumper, annular boosters, billet base & met.-(US $599.00)
Pair (2) holley 780 cfm mechanical secondary like center squirters) tunnel ram(US $499.00)
Holley, qft 750 hp double pumper, red billet base&,metering blocks,street,race(US $529.00)
Holley, qft 750 hp double pumper, red billet metering blocks, street, strip(US $489.00)
Lot of 5 holley 135-5 carburetor accelerator pump diaphragm 30cc brand new(US $9.99)
Holley, qft 1050 hp, 4150 blow-through supercharger, annular boosters,red base(US $629.00)
Lincoln future products: Seven new or improved vehicles by 2014
Tue, 30 Aug 2011Lincoln will have seven new or improved products by 2014, Ford Motor Co. has promised Lincoln dealers. Ford's global product chief, Derrick Kuzak, has said Ford will show some new or refreshed Lincoln products this year.
European new car sales in record LOW
Thu, 26 Sep 2013European new car registrations have plunged to their LOWEST level on record after slow August sales reversed an upturn in July. Registrations of 7,841,596 new cars between January-August 2013 marked a new low for the European new car market of 27 countries – so few cars have never previously been recorded since records began in 1990. 2013 UK new car sales forecast revised upwards European new car sales continue to struggle The UK new car market is the sole exception: so far this year, new car registrations have risen 10.4%, compared to the European decline of 5.2% in the same time period.
CDN-GM Interactive Design Competition - Exterior Phase Launched
Thu, 11 Aug 2011We're pleased to announce the launch of the second phase of the CDN-GM Interactive Design Competition, which challenges design students in North America to create an exterior design in response to briefs from each of GM's four brands – Buick, Cadillac, Chevrolet and GMC. This second, exterior design phase of the competition – which can be found at www.cardesigncontest.com – follows on from the previous interiors design phase and again challenges students to design against briefs set by each of GM's four brands. Remember, you don't have to have entered or registered for the interiors phase in order to take part in this exterior phase of the competition.