Find or Sell any Parts for Your Vehicle in USA

Honda Cg125 Daelim Vc125 Vl125 Vs125 Motorcycle Front Sprocket 14/15/16/17 Teeth on 2040-parts.com

US $6.50
Location:

厦门, 福建省, CN

厦门, 福建省, CN
Item must be returned within:14 Days Refund will be given as:Money back or replacement (buyer's choice) Return shipping will be paid by:Buyer Restocking Fee:No Returns Accepted:Returns Accepted Return policy details: Placement on Vehicle:Front

Leave us message about your motorcycle model, years and teeth you need, when you place the order. Thank you .
We are new Store, mainly deal with motorcycle parts. Any motorcycle parts required, leave us a message. We will contact you asap. Thank you.
Before buying, pls. check the sizes as our drawing!
Special Features:
Fuel Economizer& Speed Up
Material Type:
stainless steel Tempered Steel
Motorcycle Front sprocket  14/15/16/17 teeth  for Honda CG125 CG150 speed modification pinion Stainless steel
Sprocket specifications:
Teeth: 17 teeth outside diameter 73mm, inner diameter : 17.5/20mm, inner socket 4mm, convex groove 5mm
Teeth: 16 teeth outside diameter 69mm, inside diameter : 17.5/20mm, inner socket 4mm, convex groove 5mm
Teeth: 15 teeth outside diameter 65mm, inner diameter : 17.5/20mm, inner socket 4mm, convex groove 5mm
Teeth: 14 teeth outside diameter 60mm, inside diameter : 17.5/20mm, inner socket 4mm, convex groove 5mm
  1.      

     

  2. Climbing off-road performance can choose 14 teeth!

  3. Buyers pls. choose according to the motorcycle's actual situation . , The more thenumber of teeth ,Transmission ratio of the larger engine , the faster the rate of speed number.But if the car engine horsepower is not very adequate , not key proposed change is too large to affect the performance !
    normal increase no more than two teeth!
  4. Fuel economy principle:
By changing the transmission ratio , the the front teeth greater the motivation with speed , the faster the speed , but the load or climbing performance will be reduced
Remind users : real steel alloy gear hardness anti-wear and high special layered hardened heat treatment, Saw mill with a hacksaw and rasp is almost not moving ( gear hand personally to do some test ) at best, only to gear polished to the surface it is not rusty, some commercial gear just ordinary gear grinding , plating , acting as a steel gear , but far from the actual performance can not be compared .

 

Shipping Terms:

Items will be sent to all the countries over the world.

This package will be sent by China airmail Post.

Items will be checked carefully before sent out.

 

Shipping Time:

1 business days for order processing after received the payment.
The shipping time is about 15-30days via POST AIR to Worldwide
Note: We hope it arrive on time but since this is an international delivery, shipping time will be highly depended on the courier company and local customs/duties. Thank you for your understanding.

 

Return Policies:

If you are not satisfied with your purchase .please contact us quickly, we can exchange one to you,but buyers is responsible for the returning shiping cost .
If you have any item proplem, just email us quickly, we will do our best to slove it in 24 hours, please don’t open dispute or leave bad feedback before contacting us, it is not the best way to slove proplem. thank you!
If you want more items we can give you a little discout,thank you!

 

Contact Us:

Our office hours are :

24hours 7 days online service
And if nobody answer you online in time sometimes,do not worry.leave us a message or write down your desires,we will contact you as soon as possible.

 

 

Very Important Tips:

We have much experience on customs clearing,

please tell us what is the best price for declared value on the invoice,so that you can avoid to pay high tax.

as far as we know , FRANCE BRAZIL and TURKEY have strict inport policy.so if your package is going to those country,you must quite familiar with the policy and tell us what should we do .

if you are from Brazil,you must provide your CPF NUMBER(TAX NUMBER) to us.

 

if you can not get the package due to the policy in your country,we will not bear the lost . hope you can understand.


Transmissions & Chains for Sale

CDN – Opel/Vauxhall Interactive Design Competition deadline extended

Tue, 01 May 2012

The deadline for the 2012 Car Design News – Opel/Vauxhall Interactive Design Competition has been extended until midnight (00:00 GMT) Friday 11 May. Mark Adams, Vice President Opel/Vauxhall Design, announced the news in a video message to all entrants, in which he reiterated the brief – to design the Opel/Vauxhall Ampera of the year 2020. All students must submit both an exterior and interior design to be eligible to win paid internships within GM Europe, Opel/Vauxhall's parent company.

McLaren P1 concept

Tue, 18 Sep 2012

The McLaren P1 concept – the company's flagship hypercar model – will make its world debut at the Paris motor show next week ahead of the production model some time next year. These first images reveal an exterior that's more expressive in its surfacing and graphics than the existing MP4-12C, with a particular motif made of McLaren's 'tick' logo through the DRG. Its bodywork also appears to be layered over the underlying carbon structure that appears around the nose, rear and door panel, which hint at the diagonal bar that ran through the F1's doors, although here it dives downwards rather than creating a wedge.

Tesla loses $38 million in third quarter

Wed, 06 Nov 2013

Tesla Motors, Inc. posted a net loss of $38 million on $431 million in revenue during the third quarter -- a steeper loss on slightly higher revenue than in the second quarter. In the third quarter of 2012, when Tesla was just starting production of the Model S, the automaker lost $111 million on $50 million in revenue.