Find or Sell any Parts for Your Vehicle in USA

Honda Hrv (2nd Gen) 1.8 2wd (2015) Ultra Racing Front Strut Bar (urth-tw2-3157) on 2040-parts.com

US $188.00
Location:

KL, Malaysia

KL, Malaysia
Condition:New Brand:ULTRA RACING Warranty:Lifetime Manufacturer Part Number:URTH-TW2-3157 Country/Region of Manufacture:Malaysia Interchange Part Number:Does not apply Surface Finish:Powder-Coated (for long-lasting) Other Part Number:Does not apply Kit or Single Part:Single Part Placement on Vehicle:Front UPC:Does not apply

Application

             Application

Product

Honda HRV (2nd Gen) 1.8 2WD (2015) Front Strut Bar / Front Upper Brace / Front Tower Bar

Code URTH-TW2-3157
Specification  2 Points (Fabrication based on Thailand models)

                      

             How does it work?

Understanding Between Chassis and Handling : : :

A car chassis is carry by 4 wheels and 4 shock absorbers. When driving on bumpy road, the shock of impact will be absorb by shock absorber, however if the chassis is not strong enough to support the shock absorber, the shock of impact will not all absorb by shock absorber but by chassis, causing chassis flex. Same thing happen when make a turn on corner, chassis will be twisted by the force of weight transfer. Therefore, the handling will be rough and hard to predict the movement of car. 

To soft the chassis flex problem and improve the handling, the Ultra Racing's chassis strengthen parts is born, we will explain how this product works on you car. The stronger chassis, the better handling.

Strut Bar and Lower Arm Bar : : :

 photo strut-bar-before_zpswgvmkzao.gif   photo strut-bar-after_zpsfnyqxhzu.gif

BEFORE : 

Part of the shock of impact transfer to the chassis, causing wheel house and lower arm deforming. 

AFTER : 

Equip with the Ultra Racing's strut bar and lower arm bar, both side shock of impact will be neutralized.

  < < < While entering at corner > > >

 photo strut-bar-corner-before_zpsjmbx3dji.gif   photo strut-bar-corner-after_zpsqt3whmd2.gif  

BEFORE : 

The weight transfer and force gathering on one side, causing unstable handling and increasing body roll.

AFTER : 

The force will spread out by Ultra Racing's strut bar and lower arm bar, stabilize the car and provide solid handling.

Fender Bar : : :

 photo fender-bar-before_zpsd50ceoyd.gif   photo fender-bar-after_zps15zwy0ec.gif

BEFORE : 

The joint between A-pillar and front chassis will be push and twist by the greater shock of impact and drag force, causing damage on chassis.

AFTER : 

Ultra Racing's Fender bar will spread out the force and strengthen the section, prevent further damage and offer stable handling. Recommend for user of sport absorber

Side Lower Bar : : :

 photo side-lower-bar-before_zps8cmdyjn9.gif   photo side-lower-bar-after_zpseumbqj3b.gif

BEFORE : 

On uneven / bumpy road, center section chassis will have different level of body flex cause by the weight transfer between front and rear. 

AFTER : 

Ultra Racing's side lower bar will stabilize the weight transfer between front and rear, it can also minimize the damage from side impact.

Anti-Roll Bar : : :

 photo anti-roll-bar-before_zpsestg5qls.gif   photo strut-bar-corner-after_zpsqt3whmd2.gif
BEFORE : 

When turning in corner, the weight transfer will make the car sway a side, causing body roll and more difficult to turn in to a corner, weaken the steering respond. 

AFTER : 

The upgrade version of Ultra Racing's anti roll bar will be more effectively preventing the car sway a side at cornering, greatly reduce body roll and high stability in cornering

   

             Delivery&charges

Destination Charges
USA FREE
CANADA USD5.00
AUS USD10.00
UK, ES, SW, MX, NO, PO, PT USD10.00
NZ USD15.00
Taiwan, Thailand, Korea South USD10.00
Others ASK

      Contact

             If you have any questions on the item before or after winning the auction, please do not hesitate to contact us.

Fisker Atlantic prototype [w/gallery] [UPDATED]

Wed, 04 Apr 2012

The Fisker Atlantic prototype, developed under the codename Project Nina, has been officially unveiled at a special VIP event on the eve of the New York motor show. This luxury extended-range four-door sedan, described by Fisker as a design prototype, is aimed at young families, and uses the same hybrid plug-in as the Fisker Karma. A standout feature of the Atlantic is the rigid ‘spider' structure, which allows for a generous amount of rear headroom for a fastback car as well as maximizing the light entering the cabin while offering increased visibility to the car's surroundings.

2015 McLaren P13 details revealed

Wed, 02 Apr 2014

McLaren McLaren is not officially talking about its next car yet, other than to say it’s in the pipeline under the internal codename of P13. But having spent the last few days trying out the new 650S supercar, we have managed to gather a few intriguing details. The P13 – which won’t be called the P13 when it goes on sale – will join the McLaren range as an entry-level model, priced at around about £120,000.

Huntsman U-Box concept explores use of carbon materials

Wed, 23 Mar 2011

If you attended our Car Design Night at this year's Geneva motor show, you may well have seen the U-Box concept vehicle parked outside the entrance. Developed by Huntsman Advanced Materials, this 'last mile' delivery vehicle is a showcase of the company's composite materials expertise. "The D3 Group [based in Paris] designed the car and also came up with the idea of 'last-mile delivery'," explains Harald Wiedemann, Vice President of Huntsman Advanced Materials (EMEAI).