Honda Vtx Batwing Fairing Windshield C R S 1800 1300 Bagger 6x9" Spks on 2040-parts.com
Dallas, Texas, United States
INCLUDED: 1)
HONDA VTX FAIRING 6X9” INCHES SPEAKER HOLES. 2) 5
INCHES WINDSHIELD 3) 6 O-RINGES 4) NUTS AND BOLTS TO PUT THE FAIRING TOGETHER. (STAINLESS STEEL NUTS AND BOLTS) 5) FREE FLAME FAIRING TRIM NOT INCLUDED: SPEAKERS NOTHING ELSE INCLUDED UNLESS STATED
ABOVE.
PLEASE READ:
SPEARKERS, CD PLAYER, COVER ARE NOT INCLUDED IN THIS AUCTION
** WE DO OFFER SPEAKERS FOR
AN ADDITIONAL $100 ** WE DO OFFER A CD PLAYER
FOR AN ADDITION $100 ** WE DO OFFER A COVER FOR AN ADDITION $30 ***ANTENNA --- INTERNAL ANTENNA PLACED USED
INSIDE THE FAIRING WITH RADIO. ADDITIONAL $15 *** WE DO OFFER NICE ACORN BOLTS FOR AN ADDITION $10
***WE DO OFFER A 12" CLEAR WINDSHIELD FAIRING FOR AN ADDITION
$60 *** PLEASE LOOK AT OUR OTHER
AUCTIONS FOR THOSE ***
FAIRING ARRIVES IN GELCOAT BLACK. PREP WORKS WILL BE NEEDED BEFORE FAIRING CAN BE PAINTED Clamps to fork tubes
between the triple trees; will not work with Spec 2 or 3-type chrome fork tube
covers NOTE: PLEASE SEE A
PROFESSIONAL FOR INSTALLATION The 1800 fairing can fit on
the Honda VTX 1300 Honda VTX 1300 R & S
models: The R & S model fork
tubes between the triple trees are covered with sheet metal shrouds that have
to be removed for the fairing installation. This entails you to remove
the top tree to slide the shrouds off the tubes, which should be done according
to your shop manual. After you have removed the shrouds, the fairing can
be installed on the bare fork tubes with the use of PVC pipe spacers. The
spacers are needed because the inverted forks on the 1800 model (which the
fairing is a custom fit to) are a larger diameter than the 1300 model.
Without the spacers the mounting clamps would crush the fiberglass fairing. Honda VTX 1300 C
model: The C model fork tubes
needs only the spacers to physically mate up the fairing, but there is a
interference problem with the turn signals. They have to be removed from
the fork tubes to allow the fairing to be mounted. If relocated below the
lower tree they may interfere with the front suspension travel, so we don't
recommend that. Custom turn signals are suggested *** BIKE MUST BE EQUIPED WITH HARDWARE TO ACCEPT NORMAL
WINDSHIELD IN ORDER TO ACCEPT THIS FAIRING. WE ONLY PROVIDE THE HARDWARES TO
ATTACH THIS FAIRING TO YOUR ORGINAL HARDWARE. SOME ITEM CAN'T BE COMBINE FOR SHIPPING. ITEM
WILL BE SEND OUT FROM DALLAS, TEXAS USA. WE
WILL SHIP TO CONFIRMED ADDRESS ON PAYPAL ONLY.
Policy:
· PLEASE EMAIL US DIRECTLY IF YOU HAVE ANY QUESTIONS, CONCERNS, PROBLEMS OR ANYTHING WITH US. WE WILL DO OUR BEST TO ASSIST YOU AND MAKE SURE YOU’RE SATISFIED.PLEASE CONTACT BY EMAIL AND NOT BY OPEN A CASE. PLEASE EMAIL OR CALL. · PLEASE GIVE US UP TO 24HOURS TO GET BACK TO YOU. WE DON’T WORK DURING WEEKEND AND HOLIDAYS. IF YOU HEAR FROM US IN EMAIL, PLEASE CALL US. · PLEASE READ THE ENTIRE DESCRIPTION TO MAKE SURE IT’S WHAT YOU WANT TO BUY AND MAKE SURE IT FITS YOUR BIKE. · PLEASE RESEARCH BEFORE YOU BUY, WE WILL TRY OUR BEST TO ANSWER YOUR QUESTIONS BUT SOMETIME WE ARE NOT 100% SURE. MOST OUR PARTS ARE COMPATIBLE WITH OEM PART ONLY. PLEASE MAKE YOUR PART ARE OEM AND EXTRA ACCSSORIES WILL WORK ON YOUR BIKE. · PLEASE GIVE US UP TO 3 DAYS TO PREPARE FOR SHIPPING. WE DO SHIPPING EVERYDAY BUT SOMETIME WE ENCOUNTER SOME ISSUES SO PLEASE PARDON US. · WHAT YOU SEE IN THE PICTURES ARE WHAT YOU WILL GET. Terms:
Refund Policy 100% Money back guarantee. Refund/Exchange within 14 days if dissatisfied. You just mail the item back in the original condition, you will get your money back(No re-stocking charge). Feedback Policy We always provide Positive Ratings and Excellent feedback to all buyers. Before Leaving a Negative Feedback for any reason, please contact us. We beleive that all disputes can be settled by mutual agreements. |
Accessories for Sale
- 190t polyester universal dustproof waterproof motorcycle cover uv protector
- Black leather passenger cushion pillion seat for 99-07 suzuki hayabusa gsx1300r
- Quick detachable sissy bar backrest - harley davidson sportster '04-up(US $150.00)
- Harley davidson road glide paint set blue 2015-2016 new !! flhx(US $2,400.00)
- For harley motorcycle chopper curve exhaust muffler heat shield cover guard 10''
- Genuine honda bearing 91072-gc4-601 cr80 and cr85 1986-1995(US $13.99)
BMW i3 revealed: The BMW Megacity lives
Fri, 29 Jul 2011BMW i3 Revealed - on sale in 2013 The BMW i8 – also revealed today – may be BMW’s answer to a supercar with a conscience for the 21st century, but the other end of the scale is the BMW solution to city mobility – the BMW i3. Known as the Megacity Vehicle – at least until BMW gave us all the detail of the i3 and i8 a few months ago – the BMW i3 is an upright box with a choice of pure electric or range-extender powertrains and is – in size – somewhere between the MINI and the current 1-Series. Just like the i8, the BMW i3 has a predominantly aluminium chassis and a body made of CFRP so it’s reasonably light for an EV (1270kg) and should be nimble thanks to its low centre of gravity which, just like the i8, is due to its batteries and the other heavy stuff sitting low down.
Who's Where: Ralph Gilles to become Vice President of Design at Chrysler
Thu, 21 Aug 2008The retirement of seasoned Chrysler designer Trevor Creed has opened the doors for Ralph Gilles, who has been appointed Vice President of Design starting September 1 this year. In his new position, Gilles will be responsible for all activities of Chrysler's Product Design Office and will report to Frank O. Klegon, Executive Vice President of Product Development.
Subaru FT-86 – Turbo and 4WD
Wed, 28 Oct 2009Rendered speculation on the Subaru FT-86 Toyota brought the FT-86 – a 2 door coupe concept that may well see the return of the Celica name – to the Tokyo Motor Show this month. Designed to be an affordable coupe – and designed in collaboration with Subaru – it looks a promising new car. But we’ve seen no real detail on the other part of the equation – the Subaru FT-86 (know internally as the 216A).