Huge Minn Kota Power Tilt & Trim Aftermarket Bracket Plate Great Deal!! on 2040-parts.com

 Up for  auction is a super heavy duty aftermarket power tilt and trim plate made by Minn Kota. This power trim plate will hold any outboard up to 225 hp.Its measures about 16"L X 12" T X 10" wide. This plate held a 200 hp Mercury. It was removed from a hurricane deck boat, the owner of our local marina was reversing the boat in to place and the motor was down too far and he busted the bottom of this plate. He sent it to a shop and had them professionally weld it back together. They did an excellent job, you cannot even tell looking at it from the outside. Now when the bottom broke it also cracked the fluid reservoir. That still needs to be replaced. It is manufactured by Oildyne which is a huge power trim pump manufacturer, and Oildyne parts are very easy to get still. I took a pic of the pump with the reservoir missing off the bottom. I have a few Oildyne pumps here in stock that use the same reservoir cover but if I steal one of those, I then dont have one for that pump, so I decided to just sell this plate as is missing the reservoir and sell it at a huge reduced price to give buyer a great deal on this plate. This power trim plate retailed for over $900 new. I am including the relays , so all you will need to do is hook up your switch and run a wire back to relays for switch. Oh and the pump on this unit still runs just fine, there was no damage to pump or components on bottom of pump. I would recommend just calling your local marina and order an Oildyne fluid reservoir for this then your all good to go. Sold as is as it is a used part.