Find or Sell any Parts for Your Vehicle in USA
Performance & Racing Parts > Auto Performance Parts > Induction > Turbo Chargers

Hx52 Turbo Charger+oil Feed+drain Line For D12c/d12d Volvo Fh/fm Cummins Diesel on 2040-parts.com

US $578.58
Location:

Rowland Heights, California, United States

Rowland Heights, California, United States
HX52 TURBO CHARGER+OIL FEED+DRAIN LINE FOR D12C/D12D VOLVO FH/FM CUMMINS DIESEL, US $578.58, image 1
Condition:New Brand:Speed Daddy Compressor Inducer /Exducer (MM):66.70 / 98.80 Manufacturer Part Number:TBCHX52+OFL+ODL Compressor Trim:69 Interchange Part Number:Turbo Code: 3599996 Exhaust (Downpipe) Flange:HX Vovlo Cummins 3.50" (ID)/ 4.75" (OD) V-Band Other Part Number:OEM Serial Number: 20516242 Exhaust (Turbo Manifold) Flange:Standard T6 Twinscroll Placement on Vehicle:Front, Rear, Left, Right Turbine A/R:.96 Surface Finish:Cast Turbine Trim:92 Color:Metallic Instruction Included:No Inlet / Outlet Size (IN):4.25" / 3.25" Turbine Inducer / Exducer (mm):84.40 / 70.80 Materials:Cast Iron/Steel Turbo Housing/ Aluminum Controller Intake Inlet/ Outlet:4.25"/ 3.25" Outer Diameters Compressor A/R:.66 UPC:DOES NOT APPLY

Wheel Hub Quick Release, Racing Seat Combos items in Speed Daddy Com store on eBay!
STORE CATEGORY
NEWSLETTER!
Add my Store to your Favorites and receive my email newsletters about new items and special promotions!

General Interest
WE ACCEPT
HX52 TURBO CHARGER+OIL FEED+DRAIN LINE FOR D12C/D12D VOLVO FH/FM CUMMINS DIESEL
Description

High Compression/ Boosting Turbocharger:

The objective of a turbocharger is to improve the engine's volumetric efficiency by solving the amount of air flow into the combustion chamber limitation. This ultimately results in an increased torque and output of the engine. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is about 1 atm (approximately 14.7 PSI),so there ultimately will be a limit to the pressure difference across the intake valves. This will also limit the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air/oxygen flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.

36" Stainless Steel Braided Oil Feed Line & 0.5" Oil Drain Linee:

Oil feed lines and returns lines are an essential part of any turbo system. Oil feed lines bring oil to the turbocharger, at the same time the oil cools and lubricates the moving parts. The Oil Drain Lines take the oil that has passed through the turbo and guides it back into the engine’s oil pan. Without these two components, the turbocharger’s internals would overheat or seize causing major complications.

Oil feed and oil return lines feature stainless steel braiding to resist heat, pressure, and expansion of the lines. Each kit comes with andonized ends or fittings for a clean show quality professional look.


Specifics and Features:

High Compression/ Boosting Turbocharger:

  • Capable of Boosting Horse Power up to 300+ BHP
  • Minimum Estimated Power Gain: 75 - 100 HP
  • 20psi Efficient Torque Turbocharger
  • High Quality Material, Cast Housing with Durable Steel

    Exhaust (Turbo Manifold) Flange: Standard T6 Twinscroll
    Exhaust (Downpipe) Flange: HX Vovlo Cummins 3.50" (ID)/ 4.75" (OD) V-Band
    Intake Inlet/ Outlet: 4.25"/ 3.25" Outer Diameters

      Compressor:
      Trim: 69
      A/R: .66
      Inducer/ Exducer (mm): 66.70 / 98.80
      Turbine:
      Trim: 92
      A/R: .96
      Inducer: 84.40 / 70.80


    36" Stainless Steel Braided Oil Feed Line:

  • Stainless Steel Hose, Braided for Heat and Pressure Resistance, Strength and Durability
  • 10AN Fittings Anodized Ends
  • Inner Diameter: 0.25"
  • Length: 36.00"
  • 1/8 NPT Fittings Natural Polish Finish
  • CNC Machined Turbo Adapter Plate
  • Brass Fitting, Block Fitting, and Port Cover Included

    0.5" ID Stainless Steel Braided Oil Drain Line:

  • Stainless Steel Hose, Braided for Heat and Pressure Resistance, Strength and Durability
  • 10AN Fittings
  • Inner Diameter: 0.50"
  • Length: 17.00"
  • CNC Machined Turbo Adapter Plate
  • Weldable 10AN Oil Pan Fitting Included

    • Includes:

  • 1 x Turbocharger Kit
  • 1 x 1/8 NPT Turbo Oil Feed Line
  • 1 x Braided Turbo Oil Drain Line
  • Hardware as Shown in the Picture Above

    • Notes:

  • 100% Brand New
  • Professional Installation is Highly Recommended
  • Installation Instruction is NOT Included
    •
    Related Products
    DOMESTIC LOWER 48 US STATES:



    SALES TAX:    		 FREE



    CA ONLY
    VERY IMPORTANT:
    Double check shipping address. We are not responsible for incorrect or undeliverable addresses.

    Please use Shipping & Payments tab on top of page for shipping details for your location.

    Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.

    For Canada shipping please select the lowest price. We do not offer expedited shipping.

    US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.

    Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.

    Customer assumes shipping charges incurred in shipping to undeliverable address.

    International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.

    We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.

    We are not responsible for any changes to address after item has been shipped.

    July 1: Flooring it, and more lights, please

    Thu, 01 Jul 2010

    I drove it to Burbank airport. Hit speeds of 130 km/hr, or 80 mph with ease. I don't know why I have been reticent to go fast in this thing.

    2012 Jaguar XF Facelift Leak

    Fri, 08 Apr 2011

    One's the 2012 Jaguar XF Facelift. The other's the Jaguar C-XF Concept from 2007. We know – or at least we think we know – that the 2012 Jaguar XF is going to make its debut at the New York Motor Show this month.

    BMW signs diesel-engine supply deal with maker of police cars

    Mon, 22 Mar 2010

    BMW has agreed to supply turbocharged diesel engines to Carbon Motors Corp. to power Carbon's purpose-built police cars. In a deal signed on Monday, Carbon ordered more than 240,000 units of BMW's 3.0-liter inline six-cylinder turbodiesel--the same engine used in the X5.

    2040Parts.com © 2012-2024. All Rights Reserved.

    Designated trademarks and brands are the property of their respective owners.

    Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

    0.102 s, 11480 u