General Features

Web-Programmable Radio Replacement Solution: The iDatalink Maestro RR (ADS-MRR) is part of a web-programmable solution that allows you to replace the factory radio in many 2006-up Ford/Lincoln/Mercury, GM, Chrysler/Dodge/Jeep, and Volkswagen vehicles (requires additional vehicle specific harness). Retained features will vary by vehicle and aftermarket head unit.

Flashing the Module: The iDatalink Maestro RR (ADS-MRR) will need to be loaded with correct firmware before installation. The included USB cable plugs into your PC and allows you to "flash" the Maestro RR with the appropriate firmware to prepare it for installation. Just visit iDatalink's Weblink site, and follow the instructions. System Requirements for Weblink 6.0 include:

• Windows 2000 (SP4), XP (SP2), Vista, and 7
• Administrative rights on your PC
• Internet Explorer 7.0 or greater (excluding 64-bit version)
• Available USB port

 Note: iDatalink Maestro RR is not compatible with a Mac.

Aftermarket Radio Compatibility: The iDatalink Maestro RR (ADS-MRR) is compatible with a wide variety of aftermarket radios. Features will vary by vehicle and type of head unit.

• Head Units w/ iDatalink Serial Port: The iDatalink Maestro RR (ADS-MRR) is fully compatible select Kenwood, Alpine, and Pioneer receivers which feature a iDatalink serial port. These radios allow you to retain Ford Sync, GM Satellite Radio/Digital Fader, and Chrysler/Dodge/Jeep U-Connect factory features. Compatible Kenwood and Alpine head units also add Extra features, such as selectable gauges and vehicle information. The following aftermarket head units feature iDatalink's serial port.
  • Kenwood: 2012-up DNX/DNN/DDX01/DDX02-series receivers; for interfacing the Maestro RR with a Kenwood 2012 DNX-series navigation head unit, you'll want to add the iDatalink Maestro ADS-HRN(SX)-ALL01 cable sold separately)
  • Alpine: INE-W957HD/X008/X009), and 2014-up
  • Pioneer: 2014-up AVIC-NEX series and 2015 AVH-X series receivers via a firmware update,
• Non-Serial Port Radios: The ADS-MRR is also compatible with non-serial port radios from Kenwood, Advent, Alpine, Axxera (Dual), Blaupunkt, Boyo, Clarion, Eclipse, Jensen, JVC, Pioneer, and Sony.

Navigation Outputs: The ADS-MRR provides a VSS (vehicle speed sense), Foot Brake, Parking Brake, and a Reverse Light output to make installing practically any aftermarket navigation radio simpler and less time consuming in select Ford/Lincoln/Mercury, GM, Chrysler/Dodge/Jeep, and Volkswagen vehicles.

Steering Wheel Controls: The iDatalink Maestro RR also lets you retain your Ford/Lincoln/Mercury, GM, Chrysler/Dodge/Jeep, and Volkswagen vehicle's OEM steering wheel controls when replacing the factory radio with an aftermarket stereo that offers a SWC input. In addition to retaining the original steering wheel functions, you can assign secondary press & hold features to the buttons of your choice. There is only one wire that will have to be spliced when installing this interface in your compatible Ford/Lincoln/Mercury vehicle. However, if the vehicle was equipped with factory navigation, there will be no extra SWC wires to connect in the vehicle. You will not have to splice any wires to get SWC functionality in a compatible GM, Chrysler/Dodge/Jeep, or Volkswagen vehicle.

 Note: Steering wheel controls work with the following brands - Advent, Alpine, Axxera (Dual), Blaupunkt, Boyo, Clarion, Dual, Eclipse, Jensen, JVC, Kenwood, Pioneer, and Sony. Other brands are not supported.

Amp Turn-On Lead: The ADS-MRR provides an amp turn-on lead to turn on any factory amps when installing virtually any aftermarket head unit. Both balance & fade control are retained in many vehicles with analog amplifier systems. 2013-up DNN/DNX-series, Alpine INE-W957HD/X008/X009, or 2014-up Pioneer AVIC-NEX series head units also support fading in vehicles with digital amplifier systems.

 Note: If you are installing an aftermarket head unit that does not feature an iDatalink serial port, then you will not be able to fade in vehicles with digital amplifier systems. In this case, adjust the factory amplifier's fader prior to installation of the new aftermarket head unit.

Extra Features: When installing a compatible Kenwood 2013-up DNX/DNN-series receiver or Alpine INE-W957HD/X008/X009 head unit, the iDatalink Maestro RR offers extra features such as User Selectable Gauges, Vehicle Info (Tire Pressure/Battery Voltage/Check Engine Codes/Door Ajar Warning), and Visual Park Assist for select Ford/Lincoln/Mercury, GM, Chrysler/Dodge/Jeep, and Volkswagen vehicles.

Ford/Lincoln/Mercury Features

Ford/Lincoln/Mercury Harness: When installed in a compatible Ford/Lincoln/Mercury vehicle, the iDatalink Maestro RR requires the use of the iDatalink Maestro HRN-RR-F01 installation harness HRH-RR-F01 sold separately). If your Ford vehicle has a "My Ford" radio with 4.3" screen, then use the iDatalink HRN-RR-F02 installation harness  sold separately).

Ford/Lincoln/Mercury Firmware: The iDatalink Maestro module must also be connected to your Windows PC and flashed with one of these firmware updates from the iDatalink website

• SR-FOR01-DS2: Firmware for 2013-up Kenwood DNX/DNN aftermarket receivers, Alpine INE-W957HD/X008/X009, or 2014-up Pioneer AVIC-NEX series receivers.
• SR-FOR01-DS: Firmware for 2012 Kenwood DNX radios/DDX receivers.
• SR-FOR01-AS: Firmware for non-serial connected aftermarket head units.

Ford/Lincoln/Mercury Vehicle Compatibility Chart: The iDatalink Maestro RR is compatible with the following Ford, Lincoln, Mercury, and Mazda vehicles (as of 1/26/2015):

Ford SYNC Retention: When installing a compatible Kenwood 2012-up DNX-series navigation head unit, 2013-up DNN-series Kenwood network head unit, Alpine INE-W957HD/X008/X009, or 2014-up Pioneer AVIC-NEX series receivers, the iDatalink Maestro RR retains the Ford/Lincoln/Mercury vehicle's factory SYNC features; such as Bluetooth hands-free & audio streaming, USB media player, Aux input, RSE (Rear Seat Entertainment), and satellite radio. Satellite Radio can only be retained, if your vehicle has an external tuner; not built into the factory radio.

GM Features

GM Harness: When installed in a compatible GM vehicle, the iDatalink Maestro RR requires the use of the iDatalink Maestro HRN-RR-GM5+ installation harness (HRH-RR-GM5 sold separately).

GM Firmware: The iDatalink Maestro module must also be connected to your Windows PC and flashed with one of these firmware updates from the iDatalink website.

• SR-GMS05-DS: Firmware for 2013-up Kenwood DNX/DNN series receivers, Alpine INE-W957HD/X008/X009, or 2014-up Pioneer AVIC-NEX series receivers).
• SR-GMS05-AS: Firmware for non-serial connected aftermarket head units.

GM Compatibility Chart: The iDatalink Maestro RR is compatible with the following GM vehicles (as of 1/26/2015)

GM Factory Feature Retention: When installing a compatible Kenwood 2013-up DNX/DNN-series head unit, Alpine INE-W957HD/X008/X009, or 2014-up Pioneer AVIC-NEX series receivers, the iDatalink Maestro RR retains the factory Satellite Radio tuner, plus the factory digital amplifier and fader. Satellite Radio can only be retained, if your vehicle has an external tuner; not built into the factory radio. When installing any compatible aftermarket radio, the iDatalink Maestro RR retains the GM vehicle's factory OnStar, RAP, and Bluetooth (Phone & Audio) features. The HNR-RR-GM5+ (HRN-RR-GM5) harness includes a separate speaker that produces all warning chimes and OnStar audio.

Chrysler/Dodge/Jeep Features

Chrysler/Dodge/Jeep Harness: When installed in a compatible Chrysler/Dodge/Jeep vehicle, the iDatalink Maestro RR requires the use of the iDatalink Maestro HRN-RR-CH1, HRN-RR-CH2 or HRN-RR-CH3 installation harness (all sold separately).

Chrysler/Dodge/Jeep Firmware: The iDatalink Maestro module must also be connected to your Windows PC and flashed with one of these firmware updates from the iDatalink website.

• SR-CHR01-DS: Firmware for 2013-up Kenwood DNX/DNN series receivers, Alpine INE-W957HD/X008/X009, or 2014-up Pioneer AVIC-NEX series receivers.
• SR-CHR01-AS: Firmware for non-serial connected aftermarket head units.

Chrysler/Dodge/Jeep Vehicle Compatibility Chart: The iDatalink Maestro RR is compatible with the following Chrysler, Dodge, and Jeep vehicles (as of 5/14/2015):

Chrysler/Dodge/Jeep U-Connect Retention: When installing a compatible Kenwood 2013-up DNX/DNN-series head unit, Alpine INE-W957HD/X008/X009, or 2014-up Pioneer AVIC-NEX series receivers, the iDatalink Maestro RR will retain select factory U-Connect features in compatible Chrysler/Dodge/Jeep vehicles. Retained factory U-Connect features include Voice Command, and Media Library Browsing. Satellite Radio can only be retained, if your vehicle has an external tuner; not built into the factory radio. U-Connect is only retained in vehicles with a REQ, REU, RBZ, RHB, or RES (w/ phone) factory radio.

 * Note: U-Connect is not retained in vehicles with an RER, RHR, REN, or RES (w/o phone) factory radio, or any vehicle that requires the use of the HRN-RR-CH2 harness. U-Connect is not retained in vehicles that require the HRN-RR-CH3 harness.

Volkswagen Features

Volkswagen Harness: When installed in a compatible Volkswagen vehicle, the iDatalink Maestro RR requires the use of the iDatalink Maestro HRN-RR-VW1 installation harness (sold separately).

Volkswagen Firmware: The iDatalink Maestro module must also be connected to your Windows PC and flashed with one of these firmware updates from the iDatalink website

• ADS-RR(SR)-VWS01-DS Firmware for 2013-up Kenwood DNX/DNN series receivers, Alpine INE-W957HD/X008/X009, or 2014-up Pioneer AVIC-NEX series receivers.
• ADS-RR(SR)-VWS01-AS: Firmware for non-serial connected aftermarket head units.

Volkswagen Vehicle Compatibility Chart: The iDatalink Maestro RR is compatible with the following Volkswagen vehicles (as of 1/26/2015):

Make	Model	Year	Vehicle Specific Cable
Volkswagen	Beetle	2012-2014	HRN-RR-VW1
	CC	2009-2014	HRN-RR-VW1
	Eos	2012-2014	HRN-RR-VW1
	Golf	2010-2014	HRN-RR-VW1
	Golf R	2012-2013	HRN-RR-VW1
	GTI	2010-2014	HRN-RR-VW1
	Jetta	2011-2014	HRN-RR-VW1
	Passat	2010-2014	HRN-RR-VW1
	Routan (RBZ/REN/RER/RES/REQ/REU/RHB/RHR-type radio)	2009-2012	ADS-HRN(SR)-CHR01

Volkswagen Retained Features: When installing a compatible Kenwood 2013-up DNX/DNN-series head unit, Alpine INE-W957HD/X008/X009, or 2014-up Pioneer AVIC-NEX series receivers, the iDatalink Maestro RR retains the factory Bluetooth, the factory digital amplifier and fader, plus the factory media device interface. Using a Kenwood 2014-up DNX/DNN series head unit, select navigation information from the aftermarket radio can be displayed on the vehicle's factory multi-function screen.

iDatalink ADS HRN-RR-GM5+ Interface Harness

Connect a new car stereo and retain your factory steering wheel audio controls, warning chimes, OnStar®, and amp in select 2006-up GM vehicles

Even though we show this item to be delivered by Federal Express it may be possible that another shipping carrier, UPS, USPS, etc may deliver your item to your destination in a quicker time period, 702 Motoring is always looking for ways to improve a buyers experiance with their e-bay purchase, if a quicker shipping period is available it may be possible that your item will be delivered by another carrier. Thank you