Infinti Vq35 Vq37 Engine Valve Cover Gasket Set,g35 G37 Fx35 Fx37 M35 350z 370z on 2040-parts.com

NISSAN/ INFINITI'S

 VQ35 VALVE COVER

 SEAL REFRESH / GASKET KIT

   It will include following items.

- Vector Engineering  6 spark plug grommets.

- Nissan OEM Valve Cover Gaskets Both (right and left).

- NISSAN OEM PCV VALVE O-ring seal.

PLEASE NOTE: IN ORDER TO REPLACE THE GROMMETS SOME MODIFICATION IS NEED IT. 

 

Here is a DIY Instructions on how to replace the OEM seals on your Nissan VQ engine.

1- THIS IS A SIMPLE HOLE SAW (SIZE 1 7/8 INCH) THAT YOU CAN BUY FROM MOST HARDWARE STORE.

WE GOT OURS FROM ACE HARDWAREAND IT WAS $7

 

 

 

 

 

 

 

 

 

 

 

 

2- THIS IS HOW YOUR VALVE COVER LOOKS WHEN YOU TAKE IT OFF OF YOUR ENGINE

NOTE PICTURE SHOWN MOST LEFT SPARK PLUG HOLE DRILLED.

3- WARNING “PLEASE DO NOT REMOVE BAFFLE PLATE” WARNING

4- POSITION THE HOLE-SAW CONCENTRIC TO SPARKPLUG HOLE AND DRILL BAFFLE PLATE SLOWLY AND CAREFULLY.

5- YOU WILL ONLY NEED TO DRILL JUST ENOUGH TO DRILL THROUGH THE BAFFLE PLATE (WE CLEANED UP ALL THE DEBRIS TO SHOW YOU CLEAR PICTURE DRILL ALL 6 POSITIONS AND CLEAN OFF DEBRIS WHEN DONE.

6- NOW YOU WILL BE ABLE TO POP OUT THE OLD O-RING GROMMET OUT OF THE VALVE COVER. PLEASE REPEAT 6 TIMES.

7- THIS IS WHAT IT WOULD LOOK LIKE WITH THE O-RING GROMMET OUT

8- USE BLACK RTV SILICONE ON TOP SIDE OF THE NEW O-RING GROMMET (WE USED CLEAR ON OUR DEMO PICTURE SO YOU CAN SEE BETTER)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9- PLACE THE NEW O-RING GASKET IN TO THE HOLE. NOW YOU ARE READY TO RE-INSTALL YOUR VALVE COVER GASKET TO YOUR ENGINE.