Isuzu Engine Control Unit ( E.c.u. ) - Model Epc-k112 on 2040-parts.com

This is an Engine Control Module or Engine Control Unit  (E.C.M. * E.C.U.) that was removed from my 1989 Isuzu amigo XS with 4 wheel Drive Manual Transmission with a 2.6 liter engine. 

THIS IS A WORKING E.C.M. - This came out of a 1989 Isuzu Amigo XS with a 2.6 Liter Engine, Manual Transmission, and 4 Wheel Drive.

 the Entire 2.6 Liter drive train was removed in order to install a 3.2 liter drivetrain along with the ECM for the 3.2 liter.

I have researched this Part (ECM) and online Pricing for a Used ECM is $130 - $199.  This is the lowest price I have seen for a working ISUZU ECM MODEL EPC-K112.

Check for yourself  Google Isuzu ECM EPC-K112.   Also there is a Seller on Ebay that has a Used one for $199.   

My Research Shows it should work on Amigos From 1989 - 1992 2.6 liter 4 cylinder MPFI FED, manual or Automatic Transmissions

Should work on Amigos, Rodeos, and Pups pick ups. 

Some research indicates this will work on older Isuzu Pick ups (PUPS) as old as 1973

BUT THIS IS MY RESEARCH

PLEASE CONDUCT YOUR OWN PRIOR TO BIDDING TO ENSURE IT WILL WORK FOR YOUR APPLICATION.

This E.C.M. works fine with no Known issues. 

This came out of a 1989 Isuzu Amigo that I was driving for almost two years after I bought it with this E.C.M. in the truck before I had the entire 4 cylinder drivetrain pulled out for a Custom 6 cylinder installed. 

 I am uncertain what years or other engines this would work in.  I know it came out of a 1989 Isuzu Amigo XS 2.6 Liter Engine with a Manual Transmission and  4 wheel drive. 

This SHOULD fit any GENERATION ONE Amigo with a 2.6 liter engine. 

Whether this would work on a 2.3 liter Engine I COULD NOT TELL YOU .... this is something better asked to a Professional mechanic.

  I DID NOT do the engine swap a Professional Shop did the work.

 I am simply selling off this Part which was left over.  

The Engine was sold to a Local engine Shop,

The Transmission and Transfer case were sold to a Private Local Buyer.

The ECM is a left over Part.  Selling to offset the cost of the 3.2 liter conversion

  Numbers on the Case are:

    FED

   I-TEC MODULE

  12V

  8943342531

  EPC-K112

 9324

  Hitachi LTD. Tokyo Japan

 

 on the front by the harness connector are the following markings:

   EPC-K112

   07080

 This ECM has never been opened to the best of my knowledge has NEVER been Flashed either.

 THIS IS AN ORIGINAL E.C.M. FOR AN ISUZU AMIGO XS WITH 2.6 LITER ENGINE.

 Please ask any questions Prior to Bidding.  I have excellent rating due to Always listing my Items Truthfully and providing as much information as possible.

   To see pictures of the Amigo with the 3.2 liter check facebook for WMMTT.  there you can see the truck with the newer 3.2 liter installed. 

Item ships Priority Mail with Delivery Confirmation.

I can leave this in a Sealed Ziplock bag in storage for as long as necessary - Price will not Go any Lower - in Fact the longer I hold onto this and the more Scarce they become the Price may actually go up.  (Basic Principles of Supply & Demand)