Jeep Xj Rear Shock Relocation Brackets on 2040-parts.com
Wichita, Kansas, US
Jeep XJ Rear Shock Relocation Vehicle fit: 84-01 Jeep Cherokee XJ Tired of your rear factory shock mounts dragging the rocks? These new lower shock mounts were designed to raise the shock mount a full 3" on an XJ. The new lower mount is relocated even with the bottom of the axle tube, thus drastically increasing ground clearance. This weld on bracket is made from 3/16" steel and includes a new shock stud that will mate with any standard 5/8" ID shock bushing. Although designed for the XJ, this weld on shock mount can be used for any custom application with a tube diameter ranging from 2-1/2" to 3-1/2".
This DOES NOT include
Most items shipped within 5 days.
Damage Claims:
All orders are carefully packed, however, mishandling by the carrier in-route can result in damage. The carrier is responsible for the shipment from the time it leaves our warehouse until it is delivered to you. All claims for damage or postage should be immediately reported to the carrier, not to JeepsUSA.
Returns:
All sales are final. Exceptions to this follow these guidelines:
1. Cancellation of an item purchased through an ebay auction prior to shipping will be subject to payment by the bidder of all related listing and selling fees, plus a 10% restocking fee.
2. Refund for an item after receipt, if allowed, will be subject to inspection by JeepsUSA or the supplier, plus the purchaser is responsible for return shipping costs, listing and selling fees, and a 25% restocking fee.
3. Items that have been installed are NOT eligible for return, unless they are defective. (see warranty policy)
Warranty:
While JeepsUSA stands behind the products we sell, we cannot accept responsibility for breakage or failure of the parts. All products sold by JeepsUSA are for off road use only and designed to be used in conjunction with OEM parts only. All items sold by JeepsUSA are warranted by their manufacturers to be free from defects in materials and workmanship prior to installation. Any alteration to the product or improper use of the vehicle will void any and all warranties. No warranty will be offered for parts improperly installed. Because all parts sold are intended for off road use applications, it is not possible to warranty or guarantee the performance of any item. Further, we disclaim any liability for actions resulting from failure or parts durability. We disclaim any expressed or implied warranties. Our products and the products manufactured by others may be subject to an infinite variety of conditions due to the manner in which they are used, serviced, and/or installed. Purchasers and users of such products rely upon their own judgment as to the suitable use, selection, service and installation of such products. All warranty claims must be directed to the manufacturer(s) of the product(s).
Thank You.
Other for Sale
Jeep xj rear shock relocation brackets(US $32.99)
Jeep xj rear shock relocation brackets(US $32.99)
Jeep xj rear shock relocation brackets(US $32.99)
Jk front track bar bracket gusset kit 07-09 4" to 6" (US $35.99)
Jk front track bar bracket gusset kit 07-09 4" to 6" (US $35.99)
Jk front track bar bracket gusset kit 07-09 4" to 6" (US $35.99)
Scotland to ban petrol and diesel cars by 2050?
Wed, 25 Sep 2013The Scottish government is aiming to ban all petrol and diesel cars from towns, cities and other communities by 2050. This is according to a new “Switched On Scotland” document, intended to serve as a ‘roadmap’ towards the future that encourages businesses and private motorists to swap to electric vehicles (EVs). On Bing: see pictures of electric vehicles Find out how much a used electric vehicle costs on Auto Trader The government will put its money where it’s mouth is here, by spending over £14 million in the next two years to purchase EVs in replacement of its current petrol and diesel fleet, and installing charging points at major buildings.
July 21: The numbers game
Wed, 21 Jul 2010Plugged it in at 6:30 a.m. Rates are still low til 9:00 a.m. Ran a six-mile errand twice.
Canada urged to adopt European car safety standards
Mon, 23 Dec 2013CANADA has been urged to adopt European standards for new vehicle safety by the president of Mercedes-Benz Canada. Tim Reuss told reporters that if EU rules, which apply to all cars built by European industrial powerhouses like Mercedes and the Volkswagen Group, were in place Canada would already have new, more efficient, safer cars. At present Mercedes cannot import the A-Class because of the expense associated with modifying it to conform to Canadian safety requirements, and Mr Reuss argues that the current approach lacks common sense.