Find or Sell any Parts for Your Vehicle in USA

Key Blank Fits 05 06 2006 2005 2004 Chrysler Sebring Convertible * on 2040-parts.com

US $18.99
Location:

Hollywood, Florida, United States

Hollywood, Florida, United States
Condition:New Manufacturer Part Number:Y160/Y157 Brand:Ilco

This is about 1 Uncut Transponder key, and a second dummy key as a gift just to open doors and trunk in case of lockout. You'll save money if you keep the dummy key in your wallet.

The term transponder (short-for Transmitter-responder)means an automatic device that transmits a predetermined message in response to a predefined received signal.

These car year, make and models have keys with transponders hidden inside the plastic head of the key. The owner of the car may not even be aware that the transponder is there because there are no buttons to press. When a key is inserted into the ignition lock cylinder and turned, the car's computer sends a radio signal to the transponder. Unless the transponder replies with a valid code, the computer will not allow the engine to be started. Transponder keys have no battery; they are energized by the radio signal itself.

When you attempt to start the vehicle, the onboard computer sends out a signal that is picked up by the transponder in the key. The transponder then returns a unique signal to the vehicle's computer, giving it the ok for the vehicle to start and continue to run. This all happens in less than a second, and is completely transparent to the vehicle operator. It is a very effective system that does its job without the vehicle owner having to think about it, or modify his / her usual routine.

This system was introduced to help reduce vehicle crime. If the transponder key is missing or faulty the car will not start.

A few years ago, these keys were only available through the dealer, and the price they charge is really expensive (From $90 to $149 depending the Car).

Today, you can get these keys here, and get it delivered to your door.

Is a very easy purchase, you stay home, wait for the key, SAVE MONEY, and have the spear key you needed.

You can take it to most hardware stores, home improvement centers or locksmith shops to cut it and duplicate your original key. Once you have cut the key, you'll need to program it. That could be done by a professional locksmith, or yourself.

With the Item you'll recieve the programming instructions. But to do it yourself, you'll need to have at least two programmed keys. If you don't have two working keys, you can just go to a locksmith or dealer to cut and programming it. Taking this key with you is going to cost you less than half of regular $95 than most locksmiths and dealers charge.

It Fits:

Chrysler Sebring Convertible (1998-2006)

If you have any question, just ask!

 

Get Adobe Flash player

Key Blanks for Sale

Vauxhall Insignia (2008): first pictures

Thu, 17 Apr 2008

By Tim Pollard First Official Pictures 17 April 2008 23:43 You’ve seen the leaked images and the scoops, but now the wait is finally over. These are the first officially sanctioned photographs of the new Vauxhall Insignia – marking the end of two decade of the Vectra, which replaced the Cavalier back in 1988.It’s immediately apparent that the Insignia is way more stylish than today’s dowdy Vectra. Where that car is achingly sober and sensible, the Insignia actually lets its hair down and has a bit of fun.

2012 Zafira Tourer revealed

Wed, 18 May 2011

2012 Vauxhall Zafira Tourer - pretty much the same as the concept GM’s European arms of Vauxhall and Opel managed to tease us with the Zafira Tourer Concept back in February with a hologram of the new 7-seat Zafira hovering over the iPad of designer Mark Adams. Which if we have to have new cars teased this was at least a thought-out and original way to go. Fast forward a couple of weeks and we saw the Zafira Tourer Concept turning up at the Geneva Motor Show as a future big brother for the Zafira and potential competition for the Ford S-Max.

Royal College of Art's Class of 2013 launches real-time projects blog

Wed, 20 Mar 2013

The Royal College of Art's Vehicle Design Class of 2013 has launched a new blog that will allow the public to follow their projects and studio work from ideas to exhibition for the first time in the course's 40-year history. The blog, which is updated daily, allows people to follow the process of the 18 MA students' final projects and college work in real-time and give them a ‘behind the scenes' look at their progress. RCA student Ewan Gallimore, speaking on behalf of the class, tells Car Design News, "So much of the work and process is unseen and by regularly updating this blog we give the chance for people to follow and interact with the run up to our show.