Kick Start Gear Shaft 2000 Suzuki Rm250 Rm 250 Spindle Kickstart Pawls 96-06 Oem on 2040-parts.com
Washington, Utah, US
This auction is for a kick start gear shaft in good condition.
This item was removed from a functioning 2000 Suzuki RM250 and was tested completely prior to removal. It may fit many other years and models so check with your local dealer before purchasing for fitment questions.
This item functions perfectly. It is ready to install and put to use. It has some cosmetic imperfections as you can see in the images. This part may fit the following vehicles. It is the buyer's responsibility to verify compatibility with your local dealer.
1996 RM250
1997 RM250
1998 RM250
1999 RM250
2000 RM250
2001 RM250
2002 RM250
2003 RM250
2004 RM250
2005 RM250
2006 RM250
We are parting out the complete bike. Visit our Ebay Store to view the other parts from this bike. Yes, we do combine shipping. See our policies below.
US Customers - Upgrade to Priority Shipping for ONLY $3.00
We stand behind our parts 100%.
We are committed to providing you a good usable part. If you are not satisfied for any reason, please contact us immediately and we will strive to make it right. We do not sell junk parts and discard anything that we wouldn’t put on our own bikes. However, we are human and can make mistakes so please contact us if there is any problem with the part that is not shown in images or mentioned in the description and we will strive to make it right.
We ask in return that a 5 star feedback rating be awarded once you are satisfied.
***Please take a moment to read our policies before buying***
Part Condition: We strive to provide images and a description that fully identifies any wear or damage to the part. We do not sell parts that are unusable. We test each bike before parting it out to identify any problems with components before they go up for sale. You will receive exactly what you see in the images unless otherwise noted in the description. If you don’t see an item in the images then it is not included in the auction.
Part Compatibility: Most parts will fit a wide range of models. We only guarantee it will fit the make model and year of the bike the part was pulled from. In some cases we do provide other models that the part may fit based on dealer data, but we do not guarantee fitment with these models. Please contact your local dealer to verify fitment prior to purchasing.
Shipping: Parts are shipped out within 24 hours of receiving payment, unless payment is received on the weekend in which case the item will be shipped out on the following Monday.
Expedited Shipping: If you require expedited shipping, please contact us prior to purchasing the part to be sure we can meet your needs. We use FedEx or USPS Express mail and can help verify that you will get your part as expected.
Combined Shipping: We do offer combined shipping discounts. If you purchase several parts at the same time, contact us before paying for the items and we will provide you with a single invoice for all the parts including shipping. Please do not ask for combined shipping estimates prior to purchasing the parts. We will only charge you what it costs us to ship the combined items.
International shipping: You are responsible to pay your country’s customs fees, import duties, taxes, etc. These fees will not appear in the listing and will be charged to you by your country’s customs office. USPS priority mail is usually the best value for international shipping. International shipping can be very expensive for heavy items so please enter your location into the shipping calculator and consider the shipping charges before buying. We do not mark merchandise values below value or mark items as “gifts” so please do not ask us to falsify shipping documents.
Utah State Sales Tax: We are located in Utah; therefore, buyers located in Utah are required by law to pay Utah state sales tax. This tax will automatically be added on to your invoice if applicable.
FEEDBACK: We will leave high feedback once payment is received. WE WORK HARD TO DESERVE A 5-STAR RATING FROM YOU. If you feel like you cannot leave a 5-star rating, please contact us first and we will strive to make it right. It is a waste of your time to open a complaint with ebay or paypal prior to contacting us because we are committed to resolving your concern whether you open a complaint or not.
RETURNS: Returns are accepted within 14 days of purchase. The buyer is responsible for return shipping. There is a restocking fee for all returns. This fee will equal the cost of the original shipping plus any additional Ebay or Paypal fees Cannibal Cycle incurred as a result of the order. When the return is a result of our error, there is no restocking fee. There are no returns on electronic items because electrical problems elsewhere in your bike can damage components that are placed in the system. We test run our bikes before parting them out to ensure everything is in good working order.
On Oct-01-13 at 13:52:10 PDT, seller added the following information:
Components for Sale
Left radiator 2005 honda crf450r crf 450r no cap oem(US $64.99)
Carburetor 2005 honda crf250r crf 250 carburator carb 40mm 05 06 oem(US $188.99)
Cylinder 2004 honda crf70f crf 70f jug 47mm ct70 c70 04-12 oem(US $91.99)
Water hose joint head 2005 yamaha yz250f yz 250f engine pipe oem(US $21.99)
Inlet boot reed valve 2003 honda cr85rb cr 85rb carburetor isolator pipe oem(US $21.99)
Inner clutch case 2001 yamaha wr250f wr 250f waterpump housing yz250f 01 02 oem(US $53.99)
McLaren MP4-12C tackles the N
Mon, 24 Oct 2011Not to be left in the Nordschleife hot-lap dust, McLaren took to the German track as part of its testing of the all-wheel-drive MP4-12C, and of course, there's video. First we see the engineers making final adjustments before a quick montage of the MP4-12C testing across the world. After a few words from McLaren brass and test driver Rudi Adams, they hit the track.
Dodge Journey to become Fiat Freemont
Tue, 28 Dec 2010Dodge Journey is getting rebadged as the Fiat Freemont for Europe You might as well get used to this. Cross-pollination and re-badging between Chrysler and Fiat is going to move on apace in 2011 and this is just the start, with the recently re-fettled Dodge Journey being tweaked and re-badged for Europe as the Fiat Freemont. Sergio Marchionne sees the Journey doing much better in Europe badged as a Fiat, and he’s probably right.
Aston Martin to axe a third of jobs
Mon, 01 Dec 2008Aston Martin today announced 600 potential redundancies. It is consulting with the unions to lose 300 permanent jobs and 300 temporary staff By Tim Pollard Motor Industry 01 December 2008 14:00 Aston Martin announced at 2.00pm today that it is to cut a third of its UK workforce in a response to a slump in sales. The company, based in Gaydon, Warwickshire, said it today launched a consultation with the unions to cut 300 permanent jobs and 300 temporary posts – out of a total of 1850 employees.