Find or Sell any Parts for Your Vehicle in USA

Kicker 15" Solo Baric L7 S15l7-2 Ohm Solobaric Subwoofer+vented Sub Box+rockmat on 2040-parts.com

US $499.95
Location:

Inwood, New York, United States

Inwood, New York, United States
Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ... Brand:Kicker Speaker Size:15in. MPN:11S15L72 Voice Coil:Dual UPC:613816020829 RMS Power:1000W Type:Enclosed Non-Powered Country/Region of Manufacture:China Model:11S15L72+RSVK15+K1+RM36

Package: Kicker 11S15L7-2 15" 2000 Watt Solo Baric L7 Subwoofer + Rockville RSVK15 Single 15" Kicker Solo Baric L7 Vented Sub Enclosure Box + Single Enclosure Wire Kit With 14 Gauge Speaker Wire + Screws + Spade Terminals + Rockville Rockmat RM36 36 Sq Ft Sound Dampening Speaker Deadening Car Audio Kit

main image
Images of: Kicker S15L7-2 15" 2000 Watt Solobaric L7 Car Subwoofer Solo-Baric 11S15L7-2
Click Thumbnails to Enlarge
Images of: Rockville RSVK15 15" Vented Kicker Solo Baric L7 S15L7 Sub Enclosure Box L5 L3
Click Thumbnails to Enlarge
Images of: Complete Single Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spades
Click Thumbnails to Enlarge
Images of: Rockville Rockmat RM36 36 Sq Ft Sound Dampening Deadening Material Bulk Car Kit
Click Thumbnails to Enlarge

Condition and Warranty

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 2 YEAR MANUFACTURER

Product Description

Package Includes:

  • (1) Kicker 15" Car Subwoofer
  • (1) Rockville 15" Vented Kicker Solo Baric L7 S15L7 Sub Enclosure Box
  • (1) Rockville Rockmat RM36 36 Sq Ft Sound Deadener Bulk Kit
  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

Description for Kicker Sub:

Audiosavings can only ship Kicker products to the United States. Sorry, but we can not ship Kicker to Canada or United Kingdom.


Here at AudioSavings we strongly believe that Kicker is the BEST brand in the Car Audio Industry, so much so, that we GUARANTEE you will be more than satisfied with the sound and value of their products. We urge you to buy this product, test it, and if it doesn’t meet your standards, send it back to us within 90 Days and we’ll give you a 100% FULL REFUND (or store credit). We’ll even give you a return shipping label to ship it back to us!!!

There are no restrictions to this guarantee, other than you must send back the same item we sent you along with the any included accessories.


Solo-Baric L7 Subwoofer technology continues to maintain the title as the first and foremost authority on bass. It was the world’s first patented square subwoofer, supplying the extra decibels needed for deep, musical bass in a mobile audio system.

"Bass is what we are all about… it’s our specialty," Kicker founder and President Steve Irby said. "From the very start, we’ve been known for rich sound – it’s the Kicker heritage, and it’s carried out through all we do."

The Solo-Baric’s cutting-edge, square-sub design ultimately means more cone area, more air displacement and, therefore, more decibels than a conventional round woofer. With a patented corner-ribbed, double-stitched Santoprene® surround helping to hold the massive motor structure in place, the Solo-Baric L7 provides durability at a high excursion without compromising sound quality.

"We’ve got the accuracy, but we also have the intensity,” Irby said. “When we listen (during testing), we listen to it loud – we know there is no distortion. We make sure of it."

The Solo-Baric L7's highly-engineered motor structure handles huge power and provides extreme output. With heavy-duty, ribbon tinsel leads intertwined with semi-progressive spider technology, the square sub promises dependability when pushed to the limit, while dual voice coils with high-temp copper windings easily handle intense heat and power levels.

In addition to the unshakable structure, the Solo-Baric revolves around Kicker’s most advanced cone design, the injection-molded SoloKon™, which adds targeted strength for reliable performance and accurate response. The 360-degree, constant-contact back bracing adheres directly to every contour of the SoloKon square cone, maximizing the mechanical coupling of the motor while making the woofer as strong and responsive as possible.

Venting in SoloKon’s back-bracing and along the perimeter of the spider landing provides maximum air-flow to cool the voice coils during operation. The woofer utilizes a high-mass, extended pole piece to aid in heat dissipation.

The distinctive cast-aluminum basket provides a strong motor foundation, maintaining a low temperature and a mild magnetic field for the most efficient motion, as well as protecting the Solo-Baric’s specialized inner workings. The Solo-Baric L7 woofer remains available in 2-Ohm or 4-Ohm DVC and conducts business from a sealed- or vented-box application.


Features:

  • Square vs. Round: More cone area results in greater sound pressure produced by the woofer
  • The massive motor structure of the L7 paired with KICKER's patented square-woofer technology provides extreme output capability
  • Heat-sinking cast aluminum basket provides a strong motor foundation and maintains low temperatures during long-term operation
  • Injection-molded SoloKon™ is our most advanced cone design, adding targeted strength for reliable performance and accurate response
  • Patented corner-ribbed, double-stitched Santoprene® surround provides durability at high excursion with uncompromised sound quality
  • 360° constant-contact back bracing adheres directly to every contour of the cone to maximize mechanical coupling of the motor, maintaining precise linear excursion while making the woofer as strong and responsive as possible
  • Heavy-duty speaker leads are stitched and glued to the spider rolls for reliable performance when pushed to the limits
  • Progressive-roll spider keeps stress away from the glue joint of the spider landing for long-lasting reliability
  • Venting in the back-bracing of the cone and perimeter of the spider landing provides maximum air-flow to cool the voice-coil during operation
  • Dual Voice Coils with high-temp copper windings handle extreme power levels for long durations without burning out
  • T-cut top plate extends the magnetic field of the motor, adding balanced motor strength throughout the entire excursion path of the voice coil
  • Solid-dome extended pole piece maintains precise voice-coil control and aids in heat dissipation

Specifications:

  • Size: 15" (38.1cm)
  • Impedance: 2 ohm
  • Peak Power Handling: 2000 watts
  • Peak RMS Handling: 1000 watts
  • Sensitivity: 89.4 dB
  • Frequency Response: 18-100 Hz
  • Mounting Depth: 8-11/16" (22.1cm)
  • Mounting Cutout, Square: 13-3/4" (34.9cm)
  • Min Rec Sealed Box Volume: 1.5cubic feet(42.5 liters)
  • Max Rec Sealed Box Volume: 6.0cubic feet(169.9 liters)
  • Min Rec Vented Box Volume: 3.0cubic feet(85.0 liters)
  • Max Rec Vented Box Volume: 6.0cubic feet(169.9 liters)

Description for Rockville Enclosure:

The RSVK15 is a single 15" vented subwoofer box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is specifically made to work with the Kicker Solo Baric L7, L5, or L3. It also is perfect for many of the other 15" square subs on the market. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

  • Rockville RSVK15 Single 15" 2.6 cu. ft. 3/4" MDF Vented Subwoofer Enclosure Box
  • Specifically Designed For The 15" Kicker Solo Baric Subwoofers
  • Machine precision cut mounting holes
  • ¾” USA Heavy Duty MDF Construction
  • Top of the line Glue for extra durable adhesion
  • High quality GOLD spring loaded terminals
  • Designed, tested, and engineered to work perfectly with high powered subs
  • Designed to give the best sound quality

Enclosure Measurements:

  • Type of Enclosure: Ported/Vented
  • Enclosure Sub Size: Single 15"
  • Dimensions in Inches: 21" x 18" x 16.25"
  • Top and Bottom Depth: 16.25"
  • Mounting Depth: up to 15" (enough depth for any shallow sub on the market)
  • Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.5 Cubic Feet
  • Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.6 Cubic Feet
About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.


RM36 Includes:

  • 9 Sheets of Rockmat Sound Dampening Material (4 square feet per sheet)
  • Roller for a perfect installation
  • Degreaser to clean the area and degrease it making for a perfect installation

The Rockville Rockmat RM36 sound dampening material is a must have for any professional car audio install. This package includes 9 sheets that are each 4 square feet. This gives you a total of 36 square feet. We also include everything needed for a quick and easy installation! Our Rockmat will increase how loud your car stereo plays! It also improves bass quality and eliminates those bad rattling and distortion sounds.

Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.

Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum.  Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. If a product does not specify how much material is being used, you should be very cautious about it! Every manufacturer should know what they put into their products! Also, other products on the market such as GTMAT for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of butyl rubber and aluminum which is the same as many of the more expensive brands out there that sell for twice our price.. We do not cheat our customers. We only make top quality gear over here at Rockville!

Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.

We make all our models in 2 color options. You get the choice of black and silver. We decided to also keep the look very clean! We see all these other brands tattooing their logos all over the material. I always thought it looked stupid. So I made sure to keep our Rockmat with a clean look to it.

Installation Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area. Rockmat is pressure sensitive so after you apply the material into your desired area; apply pressure to it. That is it! Installation takes only minutes! Please note our Rockmat is also easy to cut into the desired shape you need!

To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!

Features:

  • Rockville Rockmat RM36 36 Sq Ft Sound Deadener Bulk Kit 72 Mil+Roller+Degreaser
  • 100% butyl rubber material with an aluminum heat resistant coating! (no asphault in our sound dampening material!!!)
  • Contains 9 sheets of sound damping material – Each sheet is 18" inch x 32" inch  (4 sq. ft. per sheet)
  • Paintable Surface
  • Multi purpose is ideal for multiple applications including rear decks, doors, floors, any part of the trunk, roofs, quarter panels, hoods, etc.
  • Increases SPL – The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by
  • Eliminates sound leakage!
  • Improves Bass Quality and Reduces Bass Distortion
  • Kill unwanted noise, rattles, vibrations
  • Reduce exhaust and engine noise
  • Aluminum-coated for heat-resistance
  • 72mil thickness
  • Full car installation reduces unwanted noises 5-8 dB
  • We use the highest quality high-tack self-adhesive to make your installation quick and easy!
  • Our model has new and improved increased flexibility for an easier installation and top sound quality!
  • Permanent installation with ability to withstand even the highest temperatures!
  • Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible
  • Sticks to any surface
  • Designed and engineered by Rockville USA!
  • Manufactured with the newest state-of-the-art machinery using only the purest raw materials as well!
  • Every product is checked during production for consistency. We have very high quality standards!
  • We use very high quality butyl rubber which gives amazing sound insulation and shock absorption. We do not use any asphalt in our product!
  • Available in both black and silver

Specifications:

  • Dimensions per sheet:  32" inch Length x 18" inch Width x 0.07' sheet Depth
  • Raw Material: 90% high absorbent butyl rubber and 10% pure-grade aluminum
  • Reduces unwanted noises 5-8 dB
  • Adhesive temperature range of -100F to 300F (-60C to 150C).
  • High-Tack Self-adhesive
  • Material Color: Silver
  • Weight: 25 (Lbs.) per box
  • Shipping weight: 26.19 LBS
  • Shipping Dimensions: 22.64" x 14.57" x 3.54"

Features of roller:

  • Made of high quality Wood & Steel
  • Designed especially for use in installing sound dampening material
  • Length: 7 in
  • Handle Length: 5 in
  • Roller Diameter:  1.3 in 
  • Material Color: Gray     
  • Weight: 0.44 Lbs.

Return Policy

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 2 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

  • We will send you a pre-paid shipping label to replace the item for a brand new one.
  • We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
  • We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

  • You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
  • You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.

Item Code: 11S15L72+RSVK15+K1+RM36

Subwoofers for Sale

Top Gear’s Stig spotted – at Loch Ness

Tue, 26 Jan 2010

The Stig caught by Google's street view on the shores of Loch Ness Two of the biggest mysteries in the UK are the Loch Ness Monster and Top Gear’s Stig. And Google has brought them both together by capturing the Stig standing on the side of Loch Ness on one of its street view cameras. So what’s the Stig doing on the banks of Loch Ness, you may wonder?

Ascari A10 (2007): first official pictures

Thu, 26 Oct 2006

By Jason Golembo First Official Pictures 26 October 2006 05:20 Ascari A10: the lowdown Ascari has unveiled a lightweight version of its KZ1 supercar, which it claims is a British rival for the Ferrari FXX. With 625bhp on tap and a kerb weight of around 1200kg, the new supercar is claimed to despatch the 0-60mph in 2.8sec – just 0.3sec slower than a Veyron. Just 50 A10s will be built in Ascari's Banbury plant, with only ten going to UK homes.

Penske's plan for Saturn: Sell Samsung vehicles

Tue, 26 May 2009

Entrepreneur Roger Penske wants to use the Saturn dealership network to sell vehicles built by Renault Samsung Motors and imported from South Korea. According to Automotive News, Penske recently met with Renault and Nissan CEO Carlos Ghosn in Paris to talk about the plan. Renault owns 80.1 percent of Renault Samsung.