KUS Marine Engine Oil Pressure Gauge for Boat & Yacht 12/24V 0-10Bar White 52mm
|
* Works with the pressure sensor to adjust the fluctuations in engine and gearbox oil pressure, then changes the turbocharged boost.
* Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration
* Bezel Material:White plastic,cured glass
* Installation Dimension: Φ52mm(2”)
* Installation: lock the gauge to baseboard directly by hand
* Connector: multi-plugs socket connection
* Background light: Red or Yellow
* Indicating Range:0~10Bar
* Working Voltage:12/24V
* Signal:10~184Ω
* Protection grade:IP67;can work up to 1m under water
Technical Trouble Shooting |
Q: Why is the level gauge reading backwards (reading full when tank should be empty, reading empty when tank should be full)? |
- That means the gauge and the sending unit are using different standards (one may be using American standard, 240 ohm at empty, 30 ohms at full; the other may be using European standard, 0 ohms empty, 180 ohms at full), hence, are not compatible.
- Only solution would be to replace either the gauge or the sending unit so that both are using either European Standard or American Standard ohm range.
|
Q: Does Wema carry a fuel sender that can be shortened in length? |
- Yes, the length of the High Resolution Capacitance Level Sensor (CLS) can be shortened and signal output re-calibrated.
|
Q: What lengths do the standard units come in? |
- SSS/SSL
- Available 4" through 18.5" at 0.5" increments
- Available 19" through 60" at 1" increments
- S3U and S5U
- Available 4" through 60" at 1" increments
- SHS/SHST
- 4", 6", 8", 12", 16", 18", 20", 22", 24", 28", 38"
|
Q: Are the level senders or gauges NMEA 2000 certified or compatible? |
- Currently the gauges are not compatible with the NMEA 2000 system. The level senders can be made compatible by connecting it to a signal converter module.
|
|
Gauges |
Q: What are the input signals for the gauges? |
- The signal input for our stock gauges are 240-33 ohms American Standard and 0-180 ohms, European Standards
|
Q: What type of signals does the Tachometer take? |
- The tachometer can process both sine and square signals.
|
Q: What is the operating voltage for the gauges? |
- The gauge can work with both 12V and 24V systems. When connecting to a 24V system, certain gauge will require a drop resistor on the connection between the power and the gauge.
|
Q: How to test if the level gauge is operating correctly? |
- Make sure power to the gauge is not on.
- Disconnect the black wire on the gauge to the sender. Leave enough wire at the gauge end to work with.
- Turn on the power to the gauge
- Inspect the
- American standard gauges (240-30 ohms) will show Empty. Ground the black wire, and the needle will go to Full
- European standard gauges (0-180 ohms) will show Full. Ground the black wire, and the needle will go to Empty
|
Q: How come the Navigation Gauge is not working? |
- If you recently switch the bulb on your vessel from incandescent bulbs to the equivalent LED counterparts, you need to reconnect the wires from the B1-B5 terminal to the L1-L5 terminal. Please see attached instruction.
|
Q: Are the gauge dials backlit? |
- Yes, the gauge dials are backlit with LEDs.
|
Q: Do the gauges only work with Wema senders and sensors? |
- No, the gauges can work senders and sensors from other companies as long as both are compatible (both American standard units, or both European standard units).
|
|
|
|
SEAWELL Marine Store the professional Manufacturer and Exporter of boat accessories & marine parts, with over 9 years experience in retail, wholesale amongst its directors and staff.
This selection is made by our professional team with more than 9 years of experience in the marine business. Our products are made with the highest quality standards, You will find excellent new designs in every product range at very competitive prices.
If you can't find what you are looking for please contact us and we'll try our best to source it for you!
|
All items are shipped from our warehouse in yuyao,china.
We ship your item/s within 2 business days after receipt of payment. Your item/s will be very well wrapped in bubble wrap and placed in a padded bubble bag or packing box.
International Customers: Your item will be posted via china epacketRegistered Air Mail with tracking. If you would like postage insurance please select the option through checkout (optional but recommended).
Some countries have a Value Added Sales Tax (VAT), which is charged when an item crosses into their border. VAT is charged in addition to applicable duties. It's the buyer's responsibility to know how much tax and duties will be charged.
|
We accept payment via Direct Bank Deposit (preferred) and PayPal only. If you are paying via direct bank deposit, please use your eBay user id as bank reference so we can link your payment to your purchase. Our company bank account details are as follows:
Bank Name: BANK OF CHINA YUYAO SUB BRANCH
Account name: YUYAO SEAWELL IMPORT & EXPORT CO.,LTD.
Swift Code: BKCHCNBJ92A
Account number: 403963833962
|
We offer a full guarantee on our products (12 months, unless stated otherwise) against manufacturer faults. If goods arrive with a fault please contact us immediately before sending the item back. Buyers are responsible for all P&H charges on return items. Refund exchange or repair will be issued once the item has been assessed. Refund only applies for the cost of the item (excluding all P&H charges).
Warranty will be void if products are misused, mishandled or modified in any way. We do not offer refunds for customers who change their mind after purchasing an item.
|
We are the direct supplier of most of our products and can supply to retailers and bulkbuy customers at discounted prices.
For bulk orders please EMAIL us (informing us of the exact items and quantities you require, along with your location).Wholesalers & retailers welcome!
|
|
|
|
|