Led Sequential Tail Light Turn Signal Lamp Kit Charger 2006 - 2010 (watch Video) on 2040-parts.com

2006 Dodge Charger in video clips. Kit contents; 4 Lamp Modules, protected Loads and wire splice kit as shown in photo.

Get Sequential-Style  LED  lighting and keep that Classic-Look.
Search eBay or Google for "Sweeplite"to see our other offerings.

Unique High Resolution LED Sweeping Motion Sequentials

Installation is as easy as changing a light bulb. These *SWEEPLITE® Patented-Technology LED-modules create a sequential effect in each of the Charger's four Tail-Light housings (left & right). The Sequential effect occurs for each blink of the Turn-Signal and in all lamps for each application of the Brake or flash of the Emergency-Flashers. When the Headlights or running lights are ON, these lamps also sequence off as shown in the video. Unlike typical sequential lighting, Sweeplite's unique Patented-Technology creates three sequential steps for each lamp for a total of six high-resolution steps on each side creating a smooth sweeping effect. Some installation skill is required to replace light bulbs and splice in Loads. Some minor cut and splice skill is required in some vehicles. Typical installation takes less than one hour.

Video Clip below shows *Sweeplite (TM) LED bulb modules installed on the rear of a 2006 Dodge Charger. Video provided by a satisfied customer.

NOTE, please check if the turn-signal (not emergency flasher) flashes one or two of the lamps in the housing on either side and tell us in a note when you check out. If we do not see this information we will contact you for more information.

These 4-Lamp Kits (pn 4LK111) contain two (2) each of SWEEPLITE ^®* "#ZBA-3R050, and 2 each ZBB-3R050" Red LED Lamp-Modules, two protected loads and four 3M moisture resistant wire splices and installation instructions. Installation in most Chargers listed require a load splice-in (included) and may require a wire cut and splice but no other changes or modifications. This kit does NOT include lamp-housings or any items other than the bulb replacement modules and loads splice kit. You use your original high-quality taillight housing assembly. Check compatibility list above to be sure these lamps fit your Charger or contact us before you buy.

Note, these LED Modules are for use only in rear Lamp-Housings that are sealed, have no cracks or leaks or water and are in good condition with RED lens only (no amber). Not for use in vehicles with aftermarket Tail-Light assemblies or Tail-Light assemblies modified or previously equipped with LED lighting. These LED modules replace #3057, #3157, #4057, #4157 type standard incandescent light bulbs only.
These LED Lamp-Modules use about 25% of the energy when compared to the incandescent lamps they replace.

(*)Sweeplite is Patented Technology. Made in USA. SWEEPLITE is a registered trademark.

LED Sequential Turn Signals, LED Sequential Tail Lights, LED Sequencing Turn signals.