Led Sequential Tail Light Turn Signal Lamp Kit Mustang 1994-1995 (watch Video) on 2040-parts.com
Mundelein, Illinois, US
1994 Mustang shown in video clip. Photos show Kit contents; 4 Lamp Modules, 2 loads as splices as shown in photo. 1995 Mustang taillight assembly.
Regular price of this kit is $158.00, bid now and SAVE BIG!
Get Sequential-Style LED lighting and keep that Classic-Look.
NOTE YOUR TAILLIGHT MUST LOOK SIMILAR TO THE ONE IN THE PHOTO ABOVE FOR THIS KIT TO WORK FOR YOU!
Search eBay or Google for "Sweeplite"to see our other offerings.
Unique High Resolution LED Sweeping Motion Sequentials
Installation is as easy as changing a light bulb. These *SWEEPLITE® Patented-Technology LED-modules create a sequential effect in each of the 94-95 Mustang's four Tail-Light housings (left & right). The Sequential effect occurs for each blink of the Turn-Signal and in all lamps for each application of the Brake or flash of the Emergency-Flashers. Unlike typical sequential lighting, Sweeplite's unique Patented technology creates three sequential steps for each lamp for a total of six high-resolution steps on each side creating a smooth sweeping affect unlike any other sequential. When the Headlights or Running Lights are ON, the lamps also sequence OFF as in the video. Some installation skill is required to replace light bulbs and splice in the load for some vehicles.
Video Clip below shows *SWEEPLITE ® LED bulb modules installed on the rear of a 1994 Mustang. Installation takes less than one hour. Video provided by a satisfied customer who just changed the bulb and added the loads.
Its that easy!
These 4-Lamp Kits (pn 4LK110) contain two (2) each of SWEEPLITE ®* "#ZBA-3R050, 2 each ZBB-3R050 " Red LED Lamp-Modules, two protected loads, splices and instructions. Installation in most Mustangs listed require the bulbs changed and load installation but no other changes or modifications. This kit does NOT include lamp-housings or any items other than the bulb replacement modules loads and splice kit. You use your original high-quality FORD taillight housing assembly. Check compatibility list above to be sure these lamps fit your Mustang or contact us before you buy.
Note, these LED Modules are for use only in rear Lamp-Housings that are sealed, have no cracks or leaks or water and are in good condition with RED lens only (no amber). Not for use in vehicles with aftermarket Tail-Light assemblies or Tail-Light assemblies modified or previously equipped with LED lighting. These LED modules replace #3057, #3157, #4057, #4157 type standard incandescent light bulbs only.
These LED Lamp-Modules use about 25% of the energy when compared to the incandescent lamps they replace.
Search eBay for "Sweeplite" to view our other offerings.
(*)Sweeplite is Patented technology . Made in USA. SWEEPLITE is a registered trademark.
LED Lights for Sale
H7 high power 7.5w led pure white fog head tail driving car light bulb lamp(US $8.98)
6x 42mm car interior 4 smd pink led light 3528 dome lamp bulb 211-2 578 212-2(US $10.95)
2x 1.5w usa white led smd t10 194 168 w5w projector lens light bulb replacement(US $9.98)
Led rear bumper light lamp reflector module diy kit for 13+ grand santa fe(US $184.99)
3157 red 41 smd = 123 led signal running stop light bulb 3057 3357 3457 4157 12v(US $17.48)
7443 super red 41 smd led stop tail light bulb 990 991 992 7444 7440 7441(US $17.48)
The first SRT Viper is sold, we spot an exotic XTS, and the 2013 SVT Raptor offers more off-road fun, this week's Autoweek in review
Fri, 29 Jun 2012The first SRT Viper crossed the block at Barrett Jackson in Orange County this past week, for a cool $300,000. All the proceeds will go to the Austin Hatcher Foundation, a charity to help families and children affected by pediatric cancer. While the Cadillac XTS hasn't been a stranger on public roads around Michigan, this heavily camouflaged example is a bit of a mystery.
One:1 halo car coming from Koenigsegg
Wed, 02 Oct 2013Christian von Koenigsegg talked to Bloomberg Businessweek over the weekend, telling the publication about his youth, the supercar business and how most Koenigsegg designs start in his head. It's all worth a read. But at the end of the four-page article, the head of the brand hints at a new car, built as a “money-is-no-object venture” for a dealer in China.
Lingenfelter Performance muscles up its own Trans Am
Fri, 27 Aug 2010Lingenfelter Performance Engineering is reviving a name from the growing list of dead car companies, building a reimagined, 2010 Chevrolet Camaro-based Trans Am for the PlayStation generation. Ken Lingenfelter and his Decatur, Ind., team redesigned almost every panel of the Camaro, leaving only the doors and the roof intact. They parked a 1971 Pontiac Trans Am alongside the donor car for inspiration.