Magnaflow 50467 Direct Fit Bolt-on High-flow Catalytic Converter Obdii on 2040-parts.com
US $380.60
Location:
Kansas City, Missouri, United States
Condition:NewBrand:MagnaflowCountry/Region of Manufacture:United StatesManufacturer Part Number:50467Warranty:YesWill not ship to:CaliforniaEmissions Compliance:Federal & Canada (EPA) OBDIIUPC:841380077059
Federal & Canada (EPA) OBDII This catalytic converter has been designed and manufactured to meet the Federal and Canada emission performance requirements specified by the United States EPA. This converter is NOT compliant with the regulations set forth by the California Air Resources Board. This converter is NOT compliant for vehicles with California emissions that are registered in the state of New York.
DIRECT FIT CONVERTER MagnaFlow Direct-Fit Catalytic Converters by Car Sound are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
LIMITED WARRANTY Every Magnaflow catalytic converter comes with a warranty certificate that must be registered on Magnaflow's web site. Please refer to this certificate for the warranty details. Under the conditions stated on the certificate, the catalytic converter is warranted for: A) 50,000 miles for California exempted OBD-II converters; or B) 25,000 miles on all other converters, from the date of installation. The manufacturer further warrants the catalytic converter's external shell and end-pipes (those being attached during the original manufacturing process and otherwise unaltered during installation against defects in materials and workmanship, for 5 years or 50,000 miles, whichever comes first, from date of installation.
CAR SOUND QUALITY: Compare Car Sound's catalytic converters with any other manufacturer and you'll see why Car Sound has become a leader in the manufacturing of exhaust components. Others may employ one or two of the following features, but only Car Sound puts them all together to create a catalytic converter that exceeds basic need and function. Our years of research and development have resulted in many unique features that are exclusive to Car Sound. We combine efficient manufacturing techniques and state-of-the-art industrial design to produce an end process and product that sets, rather than meets, the highest standards of product performance andefficiency in the industry.
1. Car Sound converters have a ribbed body that minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gasses and they hold the ceramic catalyst in proper alignment.
2. Car Sound converters have a 1/2" lap-joint where the necks meet the body. The neck does not extend into the converter body where it could hamper exhaust flow. This is the strongest and smoothest flowing inlet/outlet joint of any manufacturer.
3. We maintain separate dies on different sized inlets. We don't skimp by putting larger neck sizes on smaller bodies. This would reduce the flow of the converter and reduce the quality of our product.
4. Car Sound uses a monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. An improper coating could result in flow restrictions or an emission test failure.
5. Car Sound uses a heavier gauge stainless steel, tip to tip. Others use mixed weights and materials.
6. Car Sound converters are seam welded close to the converter body for a strong, tight bond. We don't weld along the edge which could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around.
7. Car Sound installs a factory capped, 90 degree air tube on "with air" converters. This saves time during installation. There is no need for additional labor to weld on an air tube or to create a bend when only an air tube stub is provided.
8. Car Sound uses an aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
The F1 Grand Prix Circus returns to the USA in 2012
The Americans have never really fallen in love with Formula One in the way the rest of the world – and particularly the Europeans – have. They have plenty of race series of their own, many arguably more exciting. Which you would think would be a good enough reason not to worry too much about the lack of a US Grand Prix on the calendar since the last one in Indianapolis in 2007.
McLaren today issued this first teaser photograph of the second model in its fledgling road-car line-up: the new McLaren MP4-12C Spider. No prizes for spotting it's a convertible version of the existing MP4-12C coupe. Expect it in showrooms later in 2012, priced to compete with the £198,936 Ferrari 458 Spider.
Fujitsubo exhaust manifold for mazda mx-5 na6c/na8c(US $769.00)
Hercules exhaust manifold 2815-00-074-8916 part number 10935238(US $85.00)
Slp performance ls1 camaro/firebird stainless steel ceramic coated y-pipe 31035(US $175.00)
2010 ford fusion exhaust heat shield(US $25.00)
2003 - 2004 mustang svt cobra 4.6 supercharger egr sku# cc45(US $90.00)
Bbk performance 40140 tuned-length shorty header(US $460.43)