Magnum Energy Inverter/charger, 2000w/100a Ms2012 on 2040-parts.com
Roanoke, Virginia, US
Magnum Energy MS Series Inverter |
The MS Series Inverter/Charger from Magnum Energy is a new pure sine wave inverter designed specifically for the most demanding mobile applications. The MS Series is powerful, easy-to-use, and best of all, cost effective. These inverters are designed for RV, marine and truck applications.
The MS Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use.
Features
You asked and Magnum listened.
The MS Series Inverter/Charger is loaded with features:
Pure sine wave: Power your T.V.s, stereos,
plasma screens, and other sensitive electronics without worry. The pure sine
wave inverter and power factor corrected charger provide clean, reliable inverter
power with low total harmonic distortion (THD) of less than 5%.
Choices: The MS Series comes in
four power models and 12 and 24
volt configurations, allowing you to
choose the model that is right for you.
Versatile mounting: Mount the MS Series on
a shelf, bulkhead, or even upside down.
Lightweight: The lightweight aluminum base
and cover also provides noise reduction and corrosion resistance.
Multiple ports: The MS Series provides multiple
ports, including an RS485 communication port for network expansion, and a remote
port.
Accessible design: The extra large AC access
cover with terminal screw block and 360° DC connection terminals with covers
make this inverter more accessible when it needs to be.
Convenient switches: The MS Series comes with
an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay: 50 Amp transfer service
is available on all models.
Buy with ease: The MS Series is backed by
a three-year (36-month) limited warranty.
Accessories and Options
Remote control: For convenient finger-tip
operation, including the new one-knob™ programming.
AGS module: Automatically starts and stops
your generator based on temperature or battery voltage.
Specifications
Model |
MS2000 * |
MS2012 ** |
MS2812 |
MS4024 |
Inverter Specifications | ||||
Input Battery Voltage |
9 - 17 VDC |
9 - 17 VDC |
9 - 17 VDC |
18 - 34 VDC |
Nominal AC output voltage |
120 VAC |
120 VAC |
120 VAC |
120 VAC |
Output frequency and accuracy |
60Hz ± 0.005% |
60Hz ± 0.005% |
60Hz ± 0.005% |
60Hz ± 0.005% |
Total Harmonic Distortion (THD) |
< 5% |
< 5% |
< 5% |
< 5% |
1 msec surge current (amps AC) |
50 |
50 |
70 |
120 |
100 msec surge current (amps AC) |
33 |
33 |
40 |
72 |
5 sec surge power (real watts) |
3300 |
3300 |
3900 |
5800 |
30 sec surge power (real watts) |
3100 |
3100 |
3800 |
5400 |
5 min surge power (real watts) |
2800 |
2800 |
3200 |
4900 |
30 min surge power (real watts) |
2200 |
2200 |
3000 |
4500 |
Continuous power output at 25ºC |
2000 VA |
2000 VA |
2800 VA |
4000 VA |
Rated input battery current |
225 ADC |
225 ADC |
267 ADC |
204 ADC |
Inverter efficiency |
89% |
89% |
88% |
87% |
Transfer time |
16 msecs |
16 msecs |
16 msecs |
16 msecs |
Search Mode |
0.3 ADC |
0.3 ADC |
0.3 ADC |
0.3 ADC |
No Load (120 VAC output with remote) |
2 ADC |
2 ADC |
2 ADC |
0.6 ADC |
Waveform |
Pure Sine Wave |
Pure Sine Wave |
Pure Sine Wave |
Pure Sine Wave |
Charger Specifications | ||||
Continuous Output at at 25 ºC |
100 ADC |
100 ADC |
125 ADC |
105 ADC |
Charger efficiency |
85% |
85% |
85% |
85% |
Power factor |
> 0.95 |
> 0.95 |
> 0.95 |
> 0.95 |
Input current at rated output (AC amps) |
15 |
15 |
18 |
29 |
General Features and Capabilities | ||||
Transfer relay capability |
MS2000: 30 A single input MS2012, MS2812, MS4024: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service |
|||
Five stage charging capability |
Bulk, Absorb, Float, Equalize, and Battery
Saver |
|||
Battery temperature compensation |
With available temp sensor (battery temp
0 - 50 ºC) |
|||
Remote inverter on/off switch |
With available pigtail to connect to dry
contact |
|||
Internal cooling |
0 to 120 cfm variable speed drive using
dual 92mm brushless DC fans |
|||
Overcurrent protection |
Yes, with two overlapping circuits |
|||
Overtemperature protection |
Yes on transformer, MOSFETS, and battery |
|||
Conformal coating on PCB's for corrosion protection |
Yes |
|||
Powder coated chassis & top for corrosion protection |
Yes |
|||
Stainless steel fasteners for corrosion protection |
Yes |
|||
Dual AC branch rated output breakers |
Optional on the MS2000 and MS2012 - AC breakers in 15 or 20 amp ratings |
|||
Listings |
ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01,
meets KKK-A-1822E standard |
|||
Warranty |
Three years |
|||
Environmental Specifications | ||||
Operating temperature |
-20 ºC to + 60 ºC (-4 ºF to 140 ºF) |
|||
Nonoperating Temperature |
-40 ºC to + 70 ºC (-40 ºF to 158 ºF) |
|||
Operating Humidity |
0 to 95% RH non-condensing |
|||
Physical Specifications | ||||
Dimensions (l x w x h) |
13.75" x 12.65" x 8.0"
(34.9 cm x 32.1 cm x 20.3 cm) |
|||
Mounting |
Shelf (top or bottom up) or bulkhead (vents
up) |
|||
Weight |
43 lb (19.5 kg) |
43 lb (19.5 kg) |
53 lb (24.0 kg) |
58 lb (26.3 kg) |
Max operating altitude |
15,000' (4570 m) |
3-year warranty
Other for Sale
- Rp3 stoltz v stop (US $9.59)
- 2 stake pocket camper tie downs(US $35.00)
- Outdoor edge game shears sc-100(US $20.99)
- Trident rubber co elbow 6 90d with/clamps blue si 290v6000ss(US $136.99)
- Sierra toggle switch tg21600(US $12.99)
- Sea dog wire rope clip 3/16 zinc 159105-1(US $1.99)
Webinars: Visualization & Digital Effect Creation with Autodesk
Wed, 02 Feb 2011Car Design News hosted Visualization & Digital Effect Creation with Autodesk on February 9, 2011. This webinar explored how effective communication is key to 'selling' a particular design internally, and provided information on how to get your vision across using Autodesk Showcase, with an emphasis on materials, cross-sections and environments. We all know that a beautifully-rendered image captures the emotion of a design idea; convincing animations and digital effects place the product in a realistic environment and depict consumer interaction, making the design credible and relevant to the target consumer.
Exclusive: Phil Zak appointed Chief Designer at Hyundai America (updated)
Tue, 24 Mar 2009Phillip A Zak will become the new Chief Designer at Hyundai's North American Design Center in Irvine, California, filling the role previously held by former GM designer Joel Piaskowski who left Hyundai to become Head of Advanced Design at Mercedes-Benz's North American Design Center in January of this year. Zak joins Hyundai from his previous role as head of exterior design at GM Europe - a post he has held since August 2007 - and will work in parallel to European Chief Designer Thomas Buerkle (who worked at BMW before joining the Korean automaker), developing vehicles for the North American market. As is the case with Buerkle, Zak will report to Hyundai Design Director Mr.
Mercedes GLA crossover (2013) at Frankfurt motor show
Wed, 14 Aug 2013This is the new Mercedes GLA crossover, an A-class in combat trousers and hiking boots. Previewed by the Concept GLA displayed at Frankfurt earlier in 2013, the production GLA is available with two- or four-wheel drive, manual or twin-clutch transmissions, and a range of four-cylinder petrol and diesel engines shared with the A-class hatch. Mercedes GLA: the styling In principle, the GLA is an A-class on stilts, and in the metal, that’s exactly what it looks like.