Magnum Me2012 | 2000w Power Inverter / Charger | 12 Volt on 2040-parts.com
US $1,119.20
Location:
Roanoke, Virginia, United States
(Multiple Values)
Magnum
Energy
ME Series
Inverter/Charger
For Mobile Applications
Model ME2012 |
Reliable
Mobile Power from Magnum Energy
Introducing the ME Series Inverter/Charger from
Magnum Energy – a new generation inverter designed specifically
for rugged mobile applications. The ME Series is powerful, easy-to-use,
and best of all, cost effective. Safe and reliable: The ME Series is ETL
Listed to the stringent requirements of UL/cUL 458, ensuring that the
inverter is safe and reliable.
Easy-to-install: Install the ME Series in four easy
steps: simply connect the inverter’s output to your distribution
circuits or electrical panel, connect your shore power cable (AC) to the
inverter’s easy-to-reach terminal block, connect the batteries,
and switch on the power.
3 Year Warranty |
Features
You asked and Magnum listened. The ME Series Inverter/Charger
is loaded with features:
- Efficient: The sine wave charger efficiently
charges your batteries even at low AC voltage, while the modified sine
wave inverter keeps the cost down. Additionally, the battery temperature
sensor works with the charger for optimum battery charging.
- Choices: The ME Series comes in three power
models, allowing you to choose the model that is right for you.
- Upgradeable memory: The inverter is designed
with Flash programming for easy memory upgrades.
- Versatile mounting: Mount the ME Series
on a shelf, bulkhead, or even upside down.
- Lightweight: The lightweight aluminum base
and cover also provides noise reduction and corrosion resistance.
- Multiple ports: The ME Series provides
multiple ports, including an RS485 communication port for network expansion,
and a remote port.
- Accessible design: The extra large AC access
cover with terminal screw block and 360° DC connection terminals
with covers make this inverter more accessible when it needs to be.
- Convenient switches: The ME Series comes
with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded transfer relay: 50 Amp transfer
service is available on all models.
- Buy with ease: The ME Series is backed
by a three-year (36-month) limited warranty.
Accessories and
Options
- Remote control: For convenient finger-tip
operation, including the new one-knob™ programming.
- AGS module: Automatically starts and stops
your generator based on temperature or battery voltage.
- Coming soon: Smart shunt: Provides precise
voltage to DC current.
- Stacking cable kit: Designed to accommodate
dual inverter configurations.
Inverter Specifications:
Input battery voltage range: 9 - 16 VDC
Nominal AC output voltage: 120 VAC
Output frequency and accuracy: 60 Hz ± 0.005%
1 msec surge current (amps AC): 60
100 msec surge current (amps AC): 37
5 sec surge power (real watts): 3700
30 sec surge power (real watts): 3450
5 min surge power (real watts): 3100
30 min surge power (real watts): 2400
Continuous power output at 45° C: 2000 VA
Rated input battery current: 191.0 ADC
Inverter efficiency (peak): 95%
Transfer time: 16 msecs
Search mode: .2 ADC
No load (120 VAC output): 0.87 ADC
Waveform: Modified Sine Wave
Charger Specifications:
Continuous output at 45° C: 100 ADC
Charger efficiency: 85%
Power factor: > .95
Input current at rated output: (AC amps) 15
General Features and Capabilities:
Transfer relay capability: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
Five stage charging capability: Bulk, Absorb, Float, Equalize, and Battery Saver
Battery temperature compensation: With available temp sensor (battery temp 0 – 50° C)
Remote inverter on/off switch: With available pigtail to connect to dry contact
Internal cooling: 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection: Yes, with two overlapping circuits
Overtemperature protection: Yes on transformer, MOSFETS, and battery
Conformal coating on PCB’s for corrosion protection: Yes
Powder coated chassis & top for corrosion protection: Yes
Stainless steel fasteners for corrosion protection: Yes
Dual AC branch rated output breakers: Optional on the ME2012 - AC breakers in 15 or 20 amp ratings
Series stacking interface 120/240 V: Yes
Listings: ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01
Warranty: Three (3) years
Physical Specifications:
Dimensions (h x w x d): 13.75” x 12.65” x 8.0”
Mounting: Shelf (top or bottom up) or bulkhead (vents up)
Weight: 38 lb (17 kg)
Max operating altitude: 15,000’ (4570 m) |
|
Converters & Inverters for Sale
Thu, 03 Feb 2005
Ferrari, in collaboration with Pininfarina, has laid down a global challenge for students of car design. The project, called 'Ferrari: new concepts for the myth', will see students from four of the world's best automotive design schools compete to create new concepts for future Ferraris. The four schools are: Art Center College of Design in Pasadena, Tokyo Communication Arts, Coventry University School of Art and Design, and the European Institute of Design in Turin.
Thu, 30 Sep 2010
Land Rover’s entire Paris show stand is dominated by Range Rover Evoques. The baby Rangie isn’t due to land in showrooms until summer 2011, but the French show is the first public launch of the Evoque, né LRX. The car was first shown at a VIP event in Kensington Palace, London in summer 2010, but now we know the full spec on the Evoque.
Fri, 04 Jul 2008
By Ben Pulman
Motor Shows
04 July 2008 12:44
The FIA has announced that from 2010 the British GP will move to Donington Park. It’s a return to the East Midlands circuit after 17 years, which last hosted the Grand Prix of Europe in 1993. To bring the circuit up to scratch for the Formula One crowd Donington Park has announced it will commence a 5-year, £100m investment programme.