Purchase Magnum MS4024PAE Inverter Charger, 4000W 24VDC 120/240VAC Pure Sine, USA in Roanoke, Virginia, United States, for US $2,159.20

Hurricane_XP photo ebayheader_zpsvswtjjdq.jpg

Magnum Energy
MS-PAE Series Inverter
MS4024PAE 4000W, 24V

The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sinewave inverter designed specifically for the most demanding renewable energy applications. The unique design of the MS-AE Series provides two 120VAC output lines that are 180° out-of-phase with each other, so that the combination of the L1 and L2 lines total 240VAC and the voltage between either L1 or L2 and neutral is 120VAC, eliminating the need to purchase two units and stack them together to get 240 volts.

When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads.

Available in 4000 (24 volts) and 4400 (48 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations.

The MS-PAE Series Inverter/Charger includes the following:

High wattage output in a small footprint - less weight and area needed for install.
Ability to parallel up to four identical MS-PAE inverters to increase output power capability (requires ME-RTR).
Pure sine wave output (<5% THD).
120/240 VAC Split phase output in a single inverter.
PFC (Power Factor Corrected) multi-stage battery charger.
RS485 standard communication protocol.
Remote and Network ports (easy connection for optional accessories).
ON/OFF Inverter-mounted switch with LED indicator.
Large AC access and terminal block [wire size: #18 to #2 AWG (0.82 to 33.6 mm2) CU].
DC terminal covers with 360 degree connection.
Battery Temperature Sensor - for optimum charging during extreme temperature changes.
Field Serviceable for qualifi ed personnel - tested repair kits available.
Smooth, aesthetically pleasing design.
MS4024PAE and MS4448PAE are ETL listed to UL/cUL STD 1741 and CSA STD 22.2 107.01-01 for safety.

Inverter Specifications	MS-PAE4024
Input Battery Voltage	18 - 34.0 VDC
Nominal AC output voltage	120/240 VAC split phase
Output frequency and accuracy	60 Hz ± 0.04%
Total Harmonic Distortion (THD)	< 5%
1 msec surge current (amps AC)	L-N: 120, L-L 70
100 msec surge current (amps AC)	L-N: 72, L-L 40
5 sec surge power (real watts)	5800
30 sec surge power (real watts)	5200
5 min surge power (real watts)	4800
30 min surge power (real watts)	4500
Maximum continuous input current	266 ADC
Inverter efficiency (peak)	93%
Transfer time	16 msecs
Power Consumption (Searching)	<6 W
Power Consumption - inverting (no load)	27 W
Waveform	Pure Sine Wave
Charger Specifications
Continuous Output at 25 ºC	105 ADC (@56.4 VDC)
Charger efficiency	85%
Power factor	> 0.95
Input current at rated output (AC amps)	15 AAC per leg at 120/240 VAC split phase
General Features and Capabilities
Transfer relay capability	2 legs at 30A per leg transfer standard on all models
Five stage charging capability	Bulk, Absorb, Float, Equalize, and Battery Saver™
Battery temperature compensation	Standard with included temp sensor (battery temp 0 to 50° C)
Internal cooling	0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection	Yes, with two overlapping circuits
Overtemperature protection	Yes on transformer, MOSFETS, and battery
Conformal coating on PCB’s for corrosion protection	Yes
Powder coated chassis & top for corrosion protection	Yes
Stainless steel fasteners for corrosion protection	Yes
Listings	ETL Listed to UL1741 and CSA STD C22.2 No.107.1-01
Warranty	Two years
Environmental Specifications
Operating temperature	-20° C to +60° C (-4° F to 140° F)
Nonoperating temperature	-40° C to +70° C (-40° F to 158° F)
Operating humidity	0 to 95% RH non condensing
Dimensions (l x w x h)	13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)
Mounting	Shelf or wall (vents not allowed to face downward unless ME-HOOD and ME-CB are installed)
Max operating altitude	15,000' (4570 m)

See the Operating Manual in Product Documentation section above for more details.

FREE! Sellers: Add a FREE map to your listings. FREE!

Jeep Grand Cherokee SRT8 (2012) to launch at Frankfurt

Tue, 30 Aug 2011

Jeep Grand Cherokee SRT8 - UK bound When Chrysler revealed the 2011 Jeep Grand Cherokee details for the UK back in June, we did have a moan that all we’d get was the 3.0 litre diesel. Where’s the big V8, we asked? Well, it looks like Chrysler were listening because the Jeep Grand Cherokee SRT8 is coming to Frankfurt and going on sale across Europe in 2012.

New Citroen DS3 revealed – the Citroen DS3 Racing

Fri, 19 Feb 2010

Citroen has revealed the hot DS3 - the Citroen DS3 Racing Last month we told you that Citroen were planning on launching a hot version of the new DS3, and we thought they were going to call it the Citroen DS3 R3. Well, the story was right, but the name wasn’t. Not quite.

Government promises £140 million for pothole patch-up

Mon, 10 Mar 2014

AP The government has promised an extra £140 million to help local councils patch up potholes on Britain’s roads. This includes those damaged in the major flooding that occured during Christmas and early February. Local authorities that suffered the worst of the recent flooding will receive £36.5 million to help repair flood-ruined roads, while the rest of the money will be doled out by the Department for Transport (DfT).

Magnum Ms4024pae Inverter Charger, 4000w 24vdc 120/240vac Pure Sine, Usa on 2040-parts.com

Converters & Inverters for Sale

Jeep Grand Cherokee SRT8 (2012) to launch at Frankfurt

New Citroen DS3 revealed – the Citroen DS3 Racing

Government promises £140 million for pothole patch-up