Package Includes:
- (1) MB QUART NA1-400.1 400w RMS Mono Class D Marine ATV Compact Amplifier
- (1) Kicker 40CWRT82 8" 600W Peak/300W RMS, 2 Ohm DVC Car Subwoofer
- (1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier Wire Kit
- (1) Rockville MRCA20 20 Foot Twisted Pair Marine RCA Cable
Authorized MB Quart Dealer!
Description of NA1-400.1:
The NA series of powersports amplifiers are designed for off-road vehicles with proprietary full range class D technology which allows for great sound quality and unusually loud volume to fit into very limited space. This compact mono 1x400 watt compact power sports amplifier delivers great sound to a single subwoofer or subwoofer system.
Features:
- MB QUART NA1-400.1 400w RMS Mono Class D Marine Boat ATV Compact Amplifier
- Circuit Topology: Full Range Class D
- Voltage Gain:
.....0.2V~4V Low Level
.....0.8V~15V High Level
- Signal to Noise: >100dB
- Frequency Response: 10Hz-300Hz
- Crossover Type: Electronic 12dB Per Octave
- Crossover Frequency Range CH1 & CH2: Switch Low Pass 300 Hz
- Tone Control: Bass Boost +6dB@45Hz
- Subsonic Filter: 60Hz
Specifications:
- Power @ 1-Ohm: 1 x 400 watts
- Power @ 2-Ohms: 1 x 200 watts
- Power @ 4-Ohms: 1 x 100 watts
- Total Channels: 1
- Audio Inputs: RCA High Level
- Wire Gauge 12v/GND: Molex Plug Connector
- Wire Gauge Speakers: Molex Plug Connector
- Fusing: 25 Amps
- Weight: 2.2 lbs (0.9 kilos)
- Dimensions: 5.5" x 3.7" x 1.7" (14 x 9.4 x 4.4cm)
Description of 40CWRT82:
Here at AudioSavings we strongly believe that Kicker is the BEST brand in the Car Audio Industry. We are so confident that you will be happy with your Kicker purchase from us that we will offer you the following guarantee. We GUARANTEE you will be more than satisfied with the sound and value of any Kicker products purchased from us. We urge you to buy this product; test it; and if it doesn’t meet your standards; send it back to us within 90 Days and we’ll give you a 100% FULL REFUND (or store credit). We’ll even give you a return shipping label to ship it back to us!!!
There are no restrictions to this guarantee, other than you must send back the same item we sent you along with the any included accessories.
CompRT™ Subwoofers have reduced what were already the thinnest mounting depths available from the world's bass leader, taking almost another inch off the shallow-mount driver's basket suitable for the trickiest installations. It's true, deep bass that's made to fit where conventional-sized subwoofers don't.
Despite the shallower mount, CompRT Subwoofers are now available in 1- or 2-Ohm dual-voice coils, made to match perfectly with KICKER KX-Series Mono Amplifiers in a car or truck, or with smaller-scale, low-impedance KICKER PX-Series Amplifiers in a powersports setting. Picking up where the preceding CompVT Series left off, CompRT Subwoofers are engineered to deliver serious bottom-end where space is limited. Whether behind the seat in a compact car or in a motorcycle's saddlebags, make no mistake signature KICKER bass is on board.
The CompRT motor structure is as intricate as one might expect from a shallow-mount subwoofer. It utilizes a large-diameter, progressive-roll spider for increased linearity and better overall sound. An inverted-bumped back plate and a bumped top plate allow for full voice-coil clearance and excursion, creating outstanding bass despite the limited area. High-temp coil wire winding around the high-mass, solid pole piece and double venting contribute to the woofers' efficient cooling attributes and durability. As a result, CompRT power handling has increased dramatically with the newest design.
CompRT features an injection-molded polypropylene cone and tough Santoprene™ surround that interlocks with the front gasket for ultra-rigidity and minimal distortion. The full-coverage, sealed steel basket provides full protection of the motor assembly, and with the interlocking surround and gasket, helps the weather-proof subwoofer perform perfectly in outdoor powersports settings.
CompRT features dual pairs of sturdy, spring-loaded wire terminals that are custom-designed specifically for the basket so the subwoofer can retain its shallow mounting capability.
Features:
- Kicker 40CWRT82 CompRT-Series Car Subwoofer
- Power Ratings: 600 Watts Peak / 300 Watts RMS
- Impedance: 2-Ohm
- True shallow-mount subwoofer great for compact cars or even motorcycle saddlebags
- Suitable for the trickiest installations
- Large-diameter, progressive-roll spider
- Inverted-bumped back plate and bumped top plate for full voice-coil clearance and excursion
- High-temp coil wire winding around a high-mass, solid pole piece
- Double venting for max cool
- Injection-molded polypropylene cone and tough Santroprene® surround that interlocks with front gasket
- Dual pair of spring-loaded wire terminals custom-designed for shallow mount
- Weather-proof for outdoor powersports applications
- Size: 8 Inches
- Mounting Depth (in, cm): 2-11/16, 6.7
- Mounting Diameter (in, cm): 7, 17.7
- Min Sealed Box Vol (cu. ft, L): 0.2, 5.66
- Max Sealed Box Vol (cu. ft, L): 1.25, 35.4
- Min Vented Box Vol (cu. ft, L): 0.8, 22.7
- Max Vented Box Vol (cu. ft, L): 1.2, 34
- Sensitivity (dB @ 1W, 1m): 84.8
Description of RMWK4:
Rockville's exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed!
Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Our Marine Grade Speaker Cables are engineered for
maximum signal transfer with minimum impedance loss. The cable strands
are all individually tinned, fine-strand, oxygen-free copper with
aluminum composite construction and provide a high-fidelity speaker
connection that is especially engineered for the marine environment.
Woven down to a flat shape, the cables can be easily routed throughout
the bulkhead with ease.
Rockville Marine Power Cables feature strands
which are all individually tinned, fine-strand, oxygen-free copper with
aluminum composite construction corrosion resistant and marine-ready.
Fine-strand construction and soft PVC jacket deliver excellent
flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great.
Features:
- Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
- 20’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 4’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1PC 60A Mini-ANL Fuse
- 2PCS Ring Terminals
- 2PCS Spade Terminals
- 5PCS Speaker Cable Terminals
- 1PC Washer
- 10PCS White Cable Ties
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
Description of MRCA20:
Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Features:
- Rockville MRCA20 RCA Interconnect Cable
- 20’ Ultra-Flexible PVC Shield
- Twisted Pair
- Premium Audiophile Marine RCA Interconnect Cable
- High Performance Water Proof RCA Plugs
- Tinned Copper Strands for Sonic Purity
- Outstanding Noise Rejection, Accuracy, and Frequency Response