Meyer E-47 Snow Plow Pump Rebuilding Service - New Motor, Coils, Paint, Sticker on 2040-parts.com

Has your Meyer E-47 Snow Plow Pump seen better days, or just doesnt want to see the light of day anymore? Well, we have the cure for you!!

We are New York Tool Repair, a full service tool repair service, and can rebuild your snow plow pump to new or better than new condition!!

After you ship us your snow plow pump, it would be inspected, old paint removed, disassembled, throughly cleaned and reinspected. All seals, O-rings, and gaskets would be replaced (not just the bad ones). We actually take apart your valves, it takes extra time, but it's worth it to replace the 3 o-rings. We would then replace the motor with a new one(not rebuilt or cleaned), and also replace the control coils with new ones. We are not fans of reusing the old electrical components, as you never know when they will fail. After the pumps are reassembled, they are tested on a test stand, hydraulic pressures are set, and electrical draw is measured. A report with these figures will accompany your pump when you get it back. (We are professionals, no second rate work) After it passes all inspections, it will be cleaned again, painted to match original color (or color of your choice should you want it to match your truck), and will have a sticker applied. It will look and perform as good as or better than new.

We are soo confident with our rebuilt snow plow pumps, that we give a 1 Year Warranty. This warranty requires that you replace your starter motor solenoid (we include a stock style one for FREE!!), flush your power angle hoses and cylinders, and we will gladly guide you through the both processes over the phone.

We would then ship the pump back to you in ready to fill and use condition. Average Turn Around Time is 2 days, however could be longer in high demand times, or shorter when there is nothing on our bench. We will email you daily (or sometimes more frequently) status updates.

**Please Note: Sometimes there are parts that cannot be reused in the rebuild process, such as a swollen C-Valve or a broken X-Over Valve. We would contact you immediately, and discuss what else it needs. To stay on eBay's good graces, if any parts were needed and you approved, we would create a new item and have you buy it through a "Buy It Now" listing. If you decided you didnt want to proceed with the rebuild, we would gladly return your pump for a full refund (minus shipping)**

Return Shipping would be thru UPS Ground, unless other arrangements have been made.

Upon purchasing this rebuild service, you will receive instructions by which to ship us your pump for rebuilding. We can receive shipments from all major carriers, and highly recommend purchasing insurance, as we will do the same on the return shipment.  Please send us a message if you have any questions, and thanks for considering New York Tool Repair for your rebuilding needs.