Micro Color Rear View Camera Setup Camera With 170 ° Ntsc on 2040-parts.com

16mm Mini Installation + configuration front and rear view camera
with distance lines and mirror function

This NTSC camera in a very compact design with a resolution of 580 (H) x RGB x 492 (V) and 420 TV lines comes in a sturdy high quality black metal housing. Equipped with a 1/4 "Color Sensor, this sensor measures an angle of 170 °.

The metal case is weatherproof and massively manufactured and additionally equipped with a special lens glass, which protects against corrosion and "blindness".

The field of application are virtually no limits if you want to use it on the car, bus, camper, truck, trailer, etc., almost anything is possible.

Distanzliniendarstelllung in Monitor

About the camera module distance lines are also displayed in the monitor. This allows the distance to obstacles behind the vehicle better estimate. This function is switched on and off.

mirror function

About the camera module, the mirror function can also be activated and deactivated. This allows the camera as front and rear camera use.

Recessed mount

With the help of the second bracket supplied, the camera can be used as a built-in camera or a camera assembly.

170 ° detection angle

The optics gives you a horizontal wide angle view of 170 degrees, so that the majority can be detected behind the vehicle. In addition, the camera is also vertically adjustable (with assembly bracket ), ie it can be customized according to each hatch type of vehicle (eg steep Combined tailgate or flat coupé tailgate).

power supply

The power is supplied via the 12 V connector of your car reversing light, so the camera automatically turns on when reverse gear.

reviews:

Guide about the "detection angle" / "Viewpoint" with reversing cameras.

rear view camera with 60 ° detection angle:

To make it as easy as possible to clarify what effect the selected detection angle of the rear view camera has, we have included the presentation of three Different reversing cameras.

The but very small angle of 60 ° does not cover too much in width, but nevertheless illustrates the more "obstacles" in depth. Characterized the camera for monitoring the "blind spot" or for monitoring the immediate surroundings behind the vehicle is not suitable, since not the complete width of the vehicle is detected. The use of this camera could be used as digital rearview mirror for detecting the rear traffic, in agriculture for control of conveyer belts etc..

In contrast, a rear view camera with 170 ° detection angle:

The detection angle of 170 ° is enormous, it is extremely Captures much content in width. This is usually done through various wide-angle lenses. This has the disadvantage that the edges or the edge region is distorted. Content in the depth are shown very small, so you should use the camera only to monitor the immediate close range. For example, in the license plate bar, or even in the trailer operation to the full swiveling be able to detect when maneuvering.

The middle ground, rear view camera with 120 ° detection angle:

From experience to her rear-view cameras have proved best with 120 ° detection angle. You easily capture the entire width of the vehicle, do not produce distortion and still provide a good representation of depth. For example, when mounted on the mobile home or even at the transporter, in the usual height of 2.30 meters, the camera already recorded more than 4 meters in width. aligned Down "barriers" are also in the deep well represented (see figure) Also suitable as a "spy camera" in the bumper of a car,. We carry this the rear view camera STO or STO-IR. For use at the mobile home or the Transportation, we have for example the rear view camera to IR18.