Motive Super Master Bearing Rebuild Kit Ford 8.8" 10 Bolt V8 Mustang F-150 Auc on 2040-parts.com
Chicago, Illinois, US
SuperKits include Premium Stackable Shims for Easier Set-up, Two crush sleeves in case of error, Both a Gasket and Silicone for the Rear Diff Cover, you choose which one you want to use.
Please Read Our Return and Exchange Policy At the Bottom of this Auction before purchase.
You need to make sure your vehicle has a 10 bolt cover, and inside is an 8.8 inch Ring Gear. The Ebay Supplied Compatiability Chart is not 100%. It will give you a good idea, but you need to make sure this kit is a match. If your not sure send us a message with all vehicle info, we can help you figure out what you have if your unsure.
Super Kit with Real Motive Gear Quality Kit and Premium Koyo Bearings as well as name brand seals and other parts. These are not Chinese Bearings like in some lower priced kits. OEM Level Kit or Better.
Motive / Koyo R10RMKS Master Bearing Rebuild Kit for Rear 8.8" 10 Bolt Axles.
Found in these vehicles :
V-8 Mustang 1986 and on
F-150 1981 to 2002
Ranger 4.0 L V6 1983 and on
Thunderbird 1987 to 1997
Explorer 1991 and on
Some Full Size Ford Passenger Cars 1980 and on ( You need to verify this is your Diff )
and many more
100% Koyo Premium Quality Bearings in this Master Kit
This kit comes with the Carrier and Pinion Bearings, Carrier Super Shims and Pinion Shims, Pinion Seal, 2XCrush Sleeve, Ring Gear Bolts, Rear End Gasket and Silicone, Loctite for Ring Gear Bolts, Brush and Marking Compound.
Kit assembled by Motive Gear
Kit does not include axle bearings or seals. We offer this kit for most applications. Message for info on item #.
We stock a complete line of parts for all front and rear differentials as well as transmission and transfer case parts and kits - message us with your part needs. We will see if we have what you need on Ebay.
Picture is generic. But shows exact parts included on this kit.
Ships FedEx and UPS Ground in the Continental
Return and Exchange Policy
Returns and Exchanges must be done within 14 days of ship date. A 20% Restock Fee will apply too all Returns for any Reason. Buyer Responsible for all Shipping Cost.
Message us before sending anything back so we can give you the correct address and RGA # plus help you to get the correct item needed.
Differentials & Parts for Sale
Dana 44 ring and pinion gear set thick cut 4.11 ratio jeep 2wd 4wd usa standard (US $179.95)
Samurai ring and pinion gear set & master bearing kit suzuki samurai 4.57 - 5.38(US $219.98)
Value dtb 513067 axle bearing rebuild kit both sides gm late model 8.6" new auc(US $54.98)
Premium dodge chrysler 9.25" true 3.92 ratio ring and pinion gear set 1 yr warr.(US $209.98)
Transfer case rebuild bearing kit chevrolet gm dodge 94-up np231 16mm - sale(US $77.98)
Premium quality dana 35 m35 rear end 3.73 ratio ring and pinion gear set(US $139.98)
Brits talk up new Bentley racer's chances
Thu, 12 Dec 2013BENTLEY’S first mainstream racing team since 2003 has been talking tough about their all-new car’s chances as it runs through its race preparation. Guy Smith, who was part of the team that won the overall Le Mans 24-hour crown in a Bentley Speed 8 10 years ago, is leading another team of three as the Continental GT3 racer hits the track at next month’s Gulf 12-hour endurance race in Dubai. “After four months of hard work and development testing, we definitely feel ready to start focusing on our race performance,” Guy said.
McLaren 12C Can-Am goes in to production
Sat, 17 Nov 2012The track only McLaren 12C – the 12C Can-Am – was revealed as a one-off at Pebble Beach but is now going in to limited production. The 12C Can-Am is aimed at the lucrative track day market in the States, and without the constraints of any production series McLaren has been able to play as they wish. That means the 12C Can-Am – developed by the McLaren GT Team which developed the 12C GT3 Race car – gets a new aerodynamic package that improves downforce by 30 per cent, including a carbon fibre splitter with winglets, a carbon fibre diffuser and huge rear spoiler.
New Mercedes ML63 AMG (2012) revealed UPDATED: ML63 AMG video
Mon, 14 Nov 2011New Mercedes ML63 AMG (2012) revealed ahead of LA Show Just a five months on from the debut of the 2012 Mercedes M Class we now get the bonkers version revealed ahead of the 2011 Los Angeles Motor Show – the 202 Mercedes ML63 AMG. Teased last week on Mercedes’ Facebook page, the new ML63 is exactly what we expected from the quickest SUV Mercedes has ever produced. As expected the ML63 gets the new Mercedes twin-turbo 5.5 litre V8.In the ML63 it delivers 518bhp and 516lb/ft of torque enough, Mercedes say, to dispatch the 0-60mph sprint in a ridiculous 4.7 seconds and on to a limited 155mpoh top speed.