Find or Sell any Parts for Your Vehicle in USA

Motobatt 2 Amp Trickle Charger For Honda Ducati Harley 10yr Warranty on 2040-parts.com

US $37.95
Location:

Jacksonville, Florida, United States

Jacksonville, Florida, United States
Condition:New Brand:MOTOBATT Warranty:Yes Manufacturer Part Number:MBCFB UPC:Does not apply

(MBCFB,1 ) $0.00 s&h

MOTOBATT FAT BOY CHARGER

2 AMP OUTPUT

10 YEAR WARRANTY

CHARGER MAINTAINER


  1. Qualification Phase:
    Initially ensures that the battery is in good condition prior to launching charge processing. As a safety measure charge process will
    not begin if the battery is below 2.0V.
  2. Battery Rescue Phase:
    MOTOBATT Battery Rescue starts it the battery voltage has risen unusually high in the early portion or the re-charge cycle.
    This is usually caused by plate sulfation. Once the battery rescue phase has succeeded in getting the battery to accept power,
    normal battery charging will begin.
  3. Soft Start Phase:
    Soft Start is used when the charger has detected a battery at a very low initial state of charge. Voltage and current are delivered
    at specified rate to help the battery to recover prior to entering Pulse charge mode.
  4. Pulse Mode Phase:
    MOTTOBATT Pulse mode provides a high frequency pulse charge to help the newly recovered battery to continue to accept
    charge as it enters the reconditioning phase.
  5. Recondition Phase:
    The MOTOBATT reconditioning phase continues to work the battery at a slightly higher voltage and amperage to
    "re-activate" the battery plates for improved depth of charge and charge acceptance.
  6. Bulk Charge Phase:
    With the battery now through Pulse and reconditioning phases and well on its way to full recovery the MOTOBATT bulk charge phase gives the battery
    constant current taking the battery up to 80% of its capacity.
  7. Absorption Phase:
    In the MOTOBATT absorption phase the battery is given constant voltage while the current is reduced based on action taken from monitoring the
    batteries current state until the battery is 100% charged.
  8. Check Phase:
    Battery is now checked to be sure that is holding a charge properly and a charger will make determination and classify the battery for use.
  9. Maintenance Phase:
    Battery can be left safely on the charger indefinitely. The unit wills monitor the battery and "turn-on" again as needed to maintain the battery
    at a full state of readiness.


PRODUCT IMAGE
     
Feature Description Benefit
Product Manufacture / Brand MotoBatt Fat Boy Charger / Maintainer
Part#    
     
Charging Current 2.0A Sell up from the 1.25A Big Boy with more powerful 2A transformer. 9 step Motobatt charging process is faster and more efficient especially with AGM and Gel Batteries
     
Charge Output Voltage Auto Variable - 13.6 to 14.8 V Uses Microprocessor to "communicate" with battery to maximize a safe charge input
     
Bulk Charge Voltage 14.8V Max Will safely and fully charge all lead acid battery types including AGM and Gel - WITHOUT OVERCHARGING!
     
Input Voltage Range 120 - 240 VAC World Voltage Capable
     
Float Voltage 13.6V Constant communication between battery and charger.
     
Auto - "on" Yes No need to turn on. Just connect and plug in - wait for green light - Done!
     
"No Connection" & Reverse
Connection LED Feature
Yes Led on user interface ensures that valuable time will be spent actually charging the battery not wasting time due to a weak or bad connection to battery.
     
Fully Charges Standard, AGM
and Gel Battery Types
Yes Properly charges and maintains all lead acid battery types.
     
Sulfated Battery Recovery Yes As part of MOTOBATT's Unique 9 Stage Charge Process - the Charge Pulse and Recovery modes team up to "Revive" sulfated batteries without battery damage
     
Charging Stages 9 Optimized Charge control
     
"Bad Battery" Test Indication Yes - Intial "Qualification" and ending "Check" phases Is good prior to recharging and does a double check at the end
     
9 Stage Charging Process Yes - See description above Increased charge speed, depth,efficiency, and accuracy
     
High Impact Plastic Housing Yes Safe, Durable, Corrosion, Acid and Shock Resistant as compared to older design metal housing
     
Optionally Available with 25'
Extension leads in box
Yes Flexible user options
     
Built-In Wall Mount Yes Flexible user options
     
Spark Proof Yes Will not spark and scare user or increase risk of explosion
     
Warranty 10 Years Great Warranty




If paying by paypal, purchaser will need to provide paypal with a confirmed address.


This item is available for local pick up. A local pick up fee may apply. Please look in the description above to see if a local pick up fee applies.

Please bring a copy of the listing/item so the the sales counter will honor the price.

Sunn Battery Co

1316 West Adams St

Jacksonville, Fl. 32204

Hours Monday thru Friday 8:00 am till 4:30 pm

If you have any questions please call ptron1 customer service at 904-354-4509.

© Sunn Battery Company 2004

Kia Sportage (2010) – the Promo video

Thu, 11 Mar 2010

The Kia Sportage 2010 'WOW'. Video below You’ve got to hand it to the Koreans. They have certainly picked up the whole car making game in a way we haven’t seen since the Japanese got their act together a generation ago.

Toyota Tundra

Sun, 07 Jan 2007

By Tim Pollard Motor Shows 07 January 2007 08:15 Toyota Tundra: the lowdown Big, isn't it? The press conference at Detroit to unveil the new Tundra pick-up was littered with phrases beginning with 'biggest', 'most' and 'heaviest'. Welcome to the US truck market, where the ability to lug, tow and carry are more important than creature comforts or looks.

Automotive Interiors Expo 2010

Thu, 08 Jul 2010

The first Automotive Interiors Expo, an event that was part of no less than five automotive trade exhibitions gathered together at the Stuttgart Messe, took place in southern Germany from the 22 to 24 of June. The exhibitions, comprising European Automotive Components Expo, Automotive Testing Expo, Vehicle Dynamics Expo and Engine Expo, showcased the latest technologies and services from over 500 suppliers to the automotive industry. Grouped in three large halls, the Expo covered conventional powertrains and batteries right through to vehicle electrical systems and crash testing, but it also featured a panel of experts discussing the color, feel and shape of material design, synergies and design challenges; safety, lighting and HMI's; and interior component design as a means of achieving sustainable and lightweight vehicles.