Motorcycle Car Dual Hi/lo Beam Hid Conversion Kit H4 Ba20d 8000k Xenon Bulb/lamp on 2040-parts.com
US $24.99
Location:
Shanghai, CN
Returns Accepted:Returns AcceptedRefund will be given as:Money BackItem must be returned within:14 DaysReturn policy details:Return with original package and in original conditionReturn shipping will be paid by:BuyerRestocking Fee:No
We use first class registered air mail ship to USA, we charge shipping cost from US buyers
Shipment to USA is 1 to 2 weeks, other countries need 3 to 6 weeks, the shipment is track able
Please contact with us to modify the shipping cost if you need a express shipment
This is a HID Xenon DIY kit for replacing the headlight on your motorcycle to gain 3x brightness and 10x lifetime than regular halogen bulbs.
(Very Important: DON'T touch the glass on bulb! any stain residue on glass will significant short lifetime of bulb)
Characteristics
Type
HID Xenon Head Light DIY Kit of Motorcycle
Voltage
DC 12V
Watts
35W
Beams
2 Beam, one High, one Low
Base
fitting(with 3 base adapters): H4-P43t, BA20d,H6 and more,
Fits almost all motorcycle
Water Resistant
Yes
Wiring
Black: Ground(negative on Battery), Blue: High Beam Power in, Red: Low Beam Power in
Light Color
Light Blue (8000K)(change the bulb if you need different color of light) 4200K and 6000K kit availabe
NOTE: This light is EXTREMLY bright, Not DOT approved: Modification of the Original Lighting on any Motor Vehicle, including Motorcycles, may not comply with Federal Motor Vehicle Safety Standards. Lights which are not DOT certified, such as most LED bulbs, brake light bulbs, turn signal bulbs, and headlight bulbs, even if designed to produce bright red, amber, or white light, may not be approved for public road use. Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Please check with your Federal and local authorities before replacing your original lighting products with any after market lights.
Installation Steps: (Please contact us if you have any questions with the product, our technician is ready answer technical question for you)
Un-plug thebattery cable ofthelight until the engineiscompletely cooled, Remove theheadlight assembly. Removetheoriginal buld socket.
Loosen theretaining clips, remove the halogen bulb, install HID bulb (use one of the 3 adapters if needed), guide high voltage wire get out from the assembly, (Note:Donottouchquartz glass tubeoftheHID bulb, stainsonhand will leave marks on high-temperature HIDbulb, that will affectthelifetime ofthe bulb.)
Install the HID ballast near by the lamp assembly firmly, change the lamp fuse to 15A or 20A (the small amp fuse is easy to be burnt out due to the starting current of xenon bulb is high), tight the high voltage cable by plastic tighter to protect cracking by moving.
Connect the Red/Blue wires to High/Low beam cable on motorcycle, black to negative cable, use electrical tape to wrap them.
Plug the battery cable, start the motorcycle, tset the new Xenon lamp, adjust the Hi/Lo beam( usually adjusted down), Warning: Don't stare on the lamp when it's on, it's so shiny may harm you eyes.
The bulb may flicker in the first few seconds when turn on the power.
Shipping
May need 1 to 6 weeks, see below for detail
We will send payment cleared orders out of our facility within 2 working days to HongKong/ShangHai Post Office, the post office needs 1 to 3 working days to sort and process international parcels,
We ship to your Paypal address only!!, please verify your Paypal address before sending payment,
Estimate Delivery time, except public holiday in both of our country
(If you can't wait the described time, please don't buy it from us):
Q: How do you caculate the combine shipping cost?
A: Pay a maximum of $3.99 shipping on all eligible non-freeshipping items (Please ask us to combine your items after putting orders but before pay for them if you bought different items)
Q: What can you do if my address is not correct?
A: Buyer should take all responsibility for offering incorrect information.
Aston Martin Production will soon see an injection of Mercedes DNA
This isn’t the first time we’ve talked about a partnership between Aston Martin and Mercedes, but according to Car & Driver it’s now just about a done deal. As long ago as March 2009 we reported that Mercedes supplied the basis for the Lagonda SUV Concept (a Mercedes GL), and six months later we reported that Aston Martin were working on a Mercedes S-Class based Lagonda saloon. More recently we reported that the GL-based Lagonda SUV was back on and that Mercedes wanted Aston Martin to put together the next generation of Maybach.
The Skoda Vision C Concept could be heading for production as an Octavia Coupe
The rise and rise of Skoda since it was a Soviet skip maker has been dramatic under the banner of the VW Group, and many of its cars are the pick of the VW Group offerings. But now Skoda look to be heading in a new design direction which looks set to produce far more stylish and dramatic cars than they have to date – just like this Skoda Vision C Concept. The VisionC – seen in the design sketch from Skoda above – is a swoopy five-door coupe with a low roofline, shallow glass area and a steeply-raked windscreen; it looks like a Skoda take on the VW CC or Mercedes CLA.
The Mercedes S Class has long been at the forefront of car technology. You can bet your boots that what we see on any new S Class will be where mainstream makers go in years to come. The S Class was first with things like inertia reel belts and air-bags, and the 2009 Mercedes S Class (perhaps we should call it the 2010 Mercedes S Class in deference to our US friends) – although an update rather than new model – follows this tradition.