Motorcycle License Plate Mounting Bracket, Veteran Manufacturing Iten #107h on 2040-parts.com
Apple Valley, California, US
For sale is a motorcycle license plate mounting brackets made from 1/8" cold rolled US steel. It weighs 1lb 5oz. before packaging. They come in several different designs so look closely and see which one fits your need. The brackets are being sold with a raw metal finish, you decide how you want it finished: painted, powder coated, chromed or however you desire. The brackets are made of one piece. No nuts and bolts to slow thing down during installation and come loose later. No welds to crack from vibration. They are made to fit the States plates listed below and they will accommodate a frame as well. The mounting axel mounting holes are 1" and 3/4" so mounting is easy. I mounted one on my Harley Davidson in about 20 minutes. I just removed my axel nut and slid the bracket over the axel and replaced the washer and nut. I have been running mine for about 500 miles now without an issue. Fits license plates with dimension 7" by 4" with bolt holes 1/4". Dimension between bolt holes 5 3/4" and 2 3/4". Arkansas, California, Deleware, Florida, Georgia, Hawaii, Idaho, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maryland, Massachusetts, Mississippi, Missouri, Montana, Nebraska, New Jersey, North Carolina, North Dakota, Ohio, Oklahoma, Pennsylvania, Rhode Island, South Carolina, South Dakota, Utah, Vermont, Washington. Can be used with the following states license plates with only difference being the hole size for mounting the licence plate: (slightly bigger hole, 9/32", 3/8" or 5/16") Maine, Michigan, Nevada, Oregon, Texas, Virginia, West Virginia, Wisconsin, Wyoming. Not recommended for: Alabama, Connecticut, Illinois, Minnesota, New Hampshire The picture shows one painted black just to give you an idea how it looks. The license plate backer is shipped Flat. Bend the backer as you require for you own application. Shipping costs are also reduced by shipping this way. The price is for one license plate mounting bracket. Manufactured by Veteran Manufacturing. Watch our low budget video on youtube on the making of part no. 107 http://www.youtube.com/watch?v=32dRQdlkVzM Keywords: Harley Davidson, bobber, chopper, xlr, xlch, ironhead, knucklehead, shovelhead, panhead, flathead, sportster, Kawasaki, Yamaha, Honda, rat rod, custom, roadster, license plate bracket, license plate mount , taillight, axle mount
Four bracket styles are made for the Duolamp tail lamp. The Duolamp is a two incondescent bulb lamp. The bottom light is for running and license plate and the top light is for brake. These lights are available on ebay all the time. There are some originals out there but honestly the reproductions are just as good or better. I bought my lamp for 35 dollars at a swap meet, it's new. There is aslo an LED version of this light.
Can be use with the following states license plates without modification to the backer:
Other Parts for Sale
T3 triumph tt600 tt 600 2001 engine oil pick up inlet(US $15.00)
Pair 6 mm motorcycle swingarm spools bobbins-yamaha aprilla triumph (bw-spool-2)(US $14.50)
K71 kawasaki ex250 ninja 250 250r 2012 rear plate light(US $10.00)
1971 honda cb175 cb 175 k5 used spark advancer(US $15.00)
Suzuki t20x6 hustler 1966/68 battery box(US $22.99)
ez-pull power clutch "helper" harley davidson 1982-02 w/late style controls(US $87.89)
Mid-Engine Wonders, an AW List
Mon, 26 Jul 2010The mid-engine. Stepping up to a mid-engine car is like going from Triple-A ball to the majors. There’s plenty of skill in Triple-A, and you can go a whole lifetime in it and be happy.
Is this the new Lexus RC F Coupe?
Mon, 30 Sep 2013Is this the new Lexus RC F Coupe? These could be Photoshops based on the Lexus LF-CC – which previewed the new IS – but they do have the feel of being real, and if they are then Lexus is delivering up an RC Coupe that’s pretty faithful to the LF-CC Concept and which promises to be a real competitor for the BMW M3. Under the bonnet of the RC F is expected to be a 5.0 litre V8 delivering around 455bhp and 400lb/ft of torque, complete with cylinder deactivation for more frugal running when you’re not wringing the neck of the V8, and mated to an eight-speed auto ‘box with flappy paddles and three driving modes.
Seat IBX concept (2011) at 2011 Geneva motor show
Mon, 28 Feb 2011On the eve of the 2011 Geneva motor show, Seat has unveiled this IBX crossover concept at the Volkswagen Group’s pre-show party. Designed under the watch of ex-Lamborghini designer Luc Donckerwolke, it’s the second concept car to preview Seat’s future design language, and a strong hint that company is preparing to launch a new, small SUV. Yes, and in 2010 we saw two versions of the IBE electric sports coupe – one without an interior, and one with.